Welcome to Microduino Wiki
|
|
Small size, full energy! Microduino series is 100% Arduino compitable open source hardware, compatible with Arduino IDE development environment and existing Arduino programs.
|
All Microduino boards adapt uniformed U-shape 27-pin standard interface (UPin-27), Microduino series can be easily stacked together through UPin-27, it is delivered ready to plug in. Microduino board size is as small as a quarter (25.40mm X 27.94mm / 1.0inch X 1.1inch), with tiny shape, Microduino series dramatically decreases the size and cost of design prototype, remarkable improves usability and flexibility of Arduino-compitable boards, as well as user experience.
|
Microduino series is typically applied in idea realization, prototype development and low volume production.
|
Version en español:
|
Tamaño pequeño, Energia total! La serie Microduino es 100% compatible con hardware de codigo abierto Arduino, compatible con el entorno de desarrollo IDE Arduino y programas de Arduino existentes.
|
Todas las placas Microduino se adaptan uniformemente con la interface estandard U-shape de 27-pin (UPin-27), la serie Microduino puede facilmente apilarse conjuntamente a travez de UPin-27, se suministra lista para su conexion. El tamaño de la placa Microduino es tan pequeño como una moneda de 25 centavos (25.40 mm X 27.94 mm / 1.0 pulgadas X 1.1 pulgadas), con forma pequeña, La Series Microduino disminuye drásticamente el tamaño y el costo del diseño de prototipos, notable mejora de la facilidad de uso y flexibilidad con placas Arduino-compitable, así como la experiencia del usuario.
|
La Series Microduino es utiliza normalmente en realización de conceptos, desarrollo de prototipos y producción de bajo volumen.
|
|
Microduino Extension Modules
|
【Microduino-ENC28J60】 + 【Microduino-RJ45】 Ethernet module
- Main chip: ENC28J60
- Microduino ethnet module
- IEEE 802.3 compitable ethernet controller
- integrate MAC and 10 BASE-T PHY, support POE
- use SPI communication protocol
- UPin-27: Microduino standard interface
|
|
Microduino-nRF24
- Microduino 2.4G wireless module
- use SPI communication protocol
- Arduino library support
|
|
Microduino-smartRF
- 470/950 MHz ISM/SRD band ultra low power wireless communication module
- Use the SIP interface to communicate with Core/Core+ module
- Have corresponding networking library support, can carry on a simple network
- UPin-27 standard interface
|
|
Microduino-NFC
- Two-way connection and identification of near-field communication module
- Use IIC interface to communicate with Core/Core+ module
- UPin-27 standard interface
|
|
Microduino-【BT】
- Microduino Shield BT, two versions are provided: BT2.1 and BT4.0
- support BT 2.1/4.0 protocol
- use hardware serial or software serial ports (optional)
- UPin-27: Microduino standard interface
|
|
Microduino-SD
- Microduino Micro SD card jack
- use SPI communication protocol
- UPin-27: Microduino standard interface
|
|
Microduino-BM
- Microduino Li-ion battery management module
- full functions of charge, discharge, voltage dectect and LED indicator
- DC-DC convert, support 3.7->5.V and 3.7V->3.3V.
- UPin-27: Microduino standard interface
|
|
Microduino-10DOF
- Microduino 10 DOF sensor module
- MPU6050 + HMC5883L + BMP085
- use I2C protocol
- UPin-27: Microduino standard interface
|
|
Microduino-OLED
- Microduino OLED 12864 display module, 0.96'
- SSD1306 driver
- use I2C protocol
- supply voltage: 3.3V
|
|
Microduino-RTC
- Microduino RTC Module
- PCF8563 CMOS Real-Time Clock (RTC)
- Two Wire Interface (I²C)
- Backup by additional EEPROM AT24C32
|
|
Microduino-NEO-6M
- Microduino GPS Module
- Core modules using UBLOX NEO-6M
- Use serial to communicate with Core module
- UPin-27: Microduino standard interface
|
|
Microduino-LM4863
- Microduino D-Class Amplifier Module
- Based on LM4863 Chip
- 2.54 Pin Interface
- UPin-27: Microduino standard interface
|
|
Microduino-CC3000
- Microduino WiFi Module
- Base on TI CC3000 IEEE 802.11b/g solution
- Use the SPI interface to communicate to Core module
- UPin-27: Microduino standard interface
|
|
Microduino-A4982
- Microduino Motor/Stepper Driver Module
- Support four-wire two-phase stepper motor
- The unique plug way more space saving
|
|
Microduino-A3906
- Microduino DC Motor Driver Module
- Can drive two DC Motors
- The unique plug way more space saving
|
|
Microduino-USBHOST
- Microduino USB communication module
- Support USB host controller and USB peripherals
- UPin-27 Microduino standard interface
|
|
Microduino-GPRS/GSM
- Microduino GPRS/GSM module
- Send, Receive short message
- Access the network using SIM card
|
|
|