Microduino Extension Modules
|
Microduino-W5500
- Microduino Ethernet module
- Support hardware TCP/IP protocol
- Built-in 10BaseT/100BaseTX Ethernet PHY
- Communicate with Core/Core+ through spi interface
- UPin-27 standard interface
|
|
【Microduino-ENC28J60】 + 【Microduino-RJ45】 Ethernet module
- Main chip: ENC28J60
- Microduino ethnet module
- IEEE 802.3 compitable ethernet controller
- integrate MAC and 10 BASE-T PHY, support POE
- use SPI communication protocol
- UPin-27: Microduino standard interface
|
|
Microduino-nRF24
- Microduino 2.4G wireless module
- use SPI communication protocol
- Arduino library support
|
|
Microduino-smartRF
- 470/950 MHz ISM/SRD band ultra low power wireless communication module
- Use the SIP interface to communicate with Core/Core+ module
- Have corresponding networking library support, can carry on a simple network
- UPin-27 standard interface
|
|
Microduino-NFC
- Two-way connection and identification of near-field communication module
- Use IIC interface to communicate with Core/Core+ module
- UPin-27 standard interface
|
|
Microduino-【BT】
- Microduino Shield BT, two versions are provided: BT2.1 and BT4.0
- support BT 2.1/4.0 protocol
- use hardware serial or software serial ports (optional)
- UPin-27: Microduino standard interface
|
|
Microduino-SD
- Microduino Micro SD card jack
- use SPI communication protocol
- UPin-27: Microduino standard interface
|
|
Microduino-BM
- Microduino Li-ion battery management module
- full functions of charge, discharge, voltage dectect and LED indicator
- DC-DC convert, support 3.7->5.V and 3.7V->3.3V.
- UPin-27: Microduino standard interface
|
|
Microduino-10DOF
- Microduino 10 DOF sensor module
- MPU6050 + HMC5883L + BMP085
- use I2C protocol
- UPin-27: Microduino standard interface
|
|
Microduino-OLED
- Microduino OLED 12864 display module, 0.96'
- SSD1306 driver
- use I2C protocol
- supply voltage: 3.3V
|
|
Microduino-RTC
- Microduino RTC Module
- PCF8563 CMOS Real-Time Clock (RTC)
- Two Wire Interface (I²C)
- Backup by additional EEPROM AT24C32
|
|
Microduino-GPS
- Microduino GPS Module
- Core modules using UBLOX NEO-6M
- Use serial to communicate with Core module
- UPin-27: Microduino standard interface
|
|
Microduino-Amplifier
- Microduino D-Class Amplifier Module
- Based on LM4863 Chip
- 2.54 Pin Interface
- UPin-27: Microduino standard interface
|
|
Microduino-WiFi
- Microduino WiFi Module
- Base on TI CC3000 IEEE 802.11b/g solution
- Use the SPI interface to communicate to Core module
- UPin-27: Microduino standard interface
|
|
Microduino-Stepper
- Microduino Motor/Stepper Driver Module
- Support four-wire two-phase stepper motor
- The unique plug way more space saving
|
|
Microduino-Motor
- Microduino DC Motor Driver Module
- Can drive two DC Motors
- The unique plug way more space saving
|
|
Microduino-USBHOST
- Microduino USB communication module
- Support USB host controller and USB peripherals
- UPin-27 Microduino standard interface
|
|
Microduino-GPRS/GSM
- Microduino GPRS/GSM module
- Send, Receive short message
- Access the network using SIM card
|
|
|