Main Page

Language	English

Welcome to Microduino Wiki
800px
Small size, full energy! Microduino series is 100% Arduino compitable open source hardware, compatible with Arduino IDE development environment and existing Arduino programs. All Microduino boards adapt uniformed U-shape 27-pin standard interface (UPin-27), Microduino series can be easily stacked together through UPin-27, it is delivered ready to plug in. Microduino board size is as small as a quarter (25.40mm X 27.94mm / 1.0inch X 1.1inch), with tiny shape, Microduino series dramatically decreases the size and cost of design prototype, remarkable improves usability and flexibility of Arduino-compitable boards, as well as user experience. Microduino series is typically applied in idea realization, prototype development and low volume production. Version en español: Tamaño pequeño, Energia total! La serie Microduino es 100% compatible con hardware de codigo abierto Arduino, compatible con el entorno de desarrollo IDE Arduino y programas de Arduino existentes. Todas las placas Microduino se adaptan uniformemente con la interface estandard U-shape de 27-pin (UPin-27), la serie Microduino puede facilmente apilarse conjuntamente a travez de UPin-27, se suministra lista para su conexion. El tamaño de la placa Microduino es tan pequeño como una moneda de 25 centavos (25.40 mm X 27.94 mm / 1.0 pulgadas X 1.1 pulgadas), con forma pequeña, La Series Microduino disminuye drásticamente el tamaño y el costo del diseño de prototipos, notable mejora de la facilidad de uso y flexibilidad con placas Arduino-compitable, así como la experiencia del usuario. La Series Microduino es utiliza normalmente en realización de conceptos, desarrollo de prototipos y producción de bajo volumen.

CAUTION:

Be noticed that Microduino studio NEVER authorize any other one to sell any Microdino product.

Les notificamos que Microduino studio NUNCA authorizo a nadie a vender cualquier producto Microdino.

Homepage: http://www.Microduino.cc/

Facebook: https://www.Facebook.com/Microduino/

Twitter: http://www.Twitter.com/Microduino/

Microduino Core Modules (Arduino Compitable)
Microduino-Core Core board of Microduino series Main chip: ATmega328P/ATmega168PA Compatible with Arduino Uno, the same hardware architect as Uno. UPin-27: Microduino standard interface
Microduino-Core+ (Performance Edition) Core board of Microduino series Main chip: ATmega644PA/ATmega1284P As powerful as Arduino Mega2560 2 hardware serial ports, 10 more digital I/O UPin-27: Microduino standard interface
Microduino-FT232R Microduino USB2TTL module, connecting PC with Microduino, uploading program to Core/Core+. Main chip: FT232RL UPin-27: Microduino standard interface
Microduino-Core32u4

Microduino Extension Modules
【Microduino-ENC28J60】 + 【Microduino-RJ45】 Ethernet module Main chip: ENC28J60 Microduino ethnet module IEEE 802.3 compitable ethernet controller integrate MAC and 10 BASE-T PHY, support POE use SPI communication protocol UPin-27: Microduino standard interface
Microduino-nRF24 Microduino 2.4G wireless module use SPI communication protocol Arduino library support
Microduino-【BT】 Microduino Shield BT, two versions are provided: BT2.1 and BT4.0 support BT 2.1/4.0 protocol use hardware serial or software serial ports (optional) UPin-27: Microduino standard interface
Microduino-SD Microduino Micro SD card jack use SPI communication protocol UPin-27: Microduino standard interface
Microduino-BM Microduino Li-ion battery management module full functions of charge, discharge, voltage dectect and LED indicator DC-DC convert, support 3.7->5.V and 3.7V->3.3V. UPin-27: Microduino standard interface
Microduino-10DOF Microduino 10 DOF sensor module MPU6050 + HMC5883L + BMP085 use I2C protocol UPin-27: Microduino standard interface
Microduino-OLED Microduino OLED 12864 display module, 0.96' SSD1306 driver use I2C protocol supply voltage: 3.3V
Microduino-RTC Microduino RTC Module PCF8563 CMOS Real-Time Clock (RTC) Two Wire Interface (I²C) Backup by additional EEPROM AT24C32
Microduino-NEO-6M Microduino GPS Module Core modules using UBLOX NEO-6M Use serial to communicate with Core module UPin-27: Microduino standard interface
Microduino-LM4863 Microduino D-Class Amplifier Module Based on LM4863 Chip 2.54 Pin Interface UPin-27: Microduino standard interface
Microduino-CC3000 Microduino WiFi Module Base on TI CC3000 IEEE 802.11b/g solution Use the SPI interface to communicate to Core module UPin-27: Microduino standard interface
Microduino-A4982 Microduino Motor/Stepper Driver Module Support four-wire two-phase stepper motor The unique plug way more space saving
Microduino-A3906 Microduino DC Motor Driver Module Can drive two DC Motors The unique plug way more space saving
Microduino-USBhost
Microduino-GSM/GPRS

Microduino Extension Boards
Microduino-Solo Microduino shield board for sensors	200px
Microduino-Duo-v Microduino Duo boards extension
Microduino-Duo-h Microduino Duo boards extension
Microduino-Uno Microduino shield board for Arduino pin-out
Microduino-Core-V1
Microduino-Core-S1
Microduino-Station

Microduino Start
[1]【Arduino IDE Microduino Configuration】 for Microduino-Core/Core+ [2]【Burn Bootloader to Microduino-Core/Core+ with an Arduino】 to initialize Microduino-Core/Core+

Microduino Basic Tutorial

• Preparation before class--Microduino derive installation, Arduino IDE introduction and Arduino programming introduction
• Lesson 1--LED flashes experiments (using bread board)
• Lesson 2--Multiple led flashes experiments
• Lesson 3--Button switch control LED
• Lesson 4--The button PWM control of LED brightness
• Lesson 5--The potentiometer PWM control of LED brightness
• Lesson 6--The Program PWM control of LED brightness --Breathing light
• Lesson 7--Control the color of RGB LED
• Lesson 8--Pulse timing (check how long you hold down the switch)
• Lesson 9--Microduino used as 0-5V range voltmeter (simulate a multimeter)
• Lesson 10--The first pegboard experiments (using electric iron)
• Lesson 11--Microduino "The lamp of Da Vinci（light-sensitive experiments）"
• Lesson 12--Microduino "Light indicator"
• Lesson 13--Microduino "Light alarm (DIY a phototransistor by yourself)"
• Lesson 14--Microduino "A simple thermometer"
• Lesson 15--Microduino "Make sense of warm cup circuit"
• Lesson 16--Microduino "Fingertip switch (transistor trigger)"
• Lesson 17--Microduino "Buzzer alarm"
• Lesson 18--Microduino "Make a flood water level alarm model"
• Lesson 19--Microduino "Sampling ADC of internal reference source"
• Lesson 20--Microduino "Use Interrupt"
• Lesson 21--Microduino "Use Timer Interrupt"
• Lesson 22--Microduino "Serial port debugging"
• Lesson 23--Microduino "Serial port receives string and translated into an array"

|}

Microduino Intermediate Tutorial

Microduino KIT Example Tutorial Microduino NRF communication-201KIT Microduino BLE_IOS-202KIT Microduino CC3000 get weather information by internet -203KIT Microduino LM4863 Music player -301KIT Microduino Enc Wired network experiment -302KIT Microduino NRF Wireless Gateway based on Enc Gateway -304 KIT Microduino GPS recorder-306KIT Microduino Project Application Gate-Microduino The application gateway based Microduino 200px Room-Microduino Microduino + Yeelink -- smart home solutions 【老潘orz@微博 原创】 200px Fly-Microduino Quadcopter based Microduino 【Preparing】 200px Green-Microduino Smart flower stand based Microduino 【Preparing】 200px Music-Microduino Music Box based Microduino【Preparing】 200px Microduino Standard Interface Microduino standard interface (UPin-27) 800px Microduino series pinout summary Microduino- D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 A0 A1 A2 A3 A4 A5 A6 A7 5V 3V3 GND RX TX MISO MOSI SCK SDA SCL Core RX TX IN Core+ RX0 TX0 RX1 TX1 IN FT232RL TX RX OUT OUT ENC28J60 IRQ CS SO SI SCK IN nRF24L01+ INT CSN CE SO SI SCK IN CC3000 IRQ EN CS DOUT DIN SCK IN SD CS D0 DI SCK CD IN BM OUT OUT 10DOF SDA SCL IN BT (TX) (RX) (TX) (RX) TX RX IN About This Wiki was built in 2013/June/11, there are 1,708 pages, 26,539 files uploaded and 43,324 revises. To learn more information, please visit Recent Changes.