“Microduino NRF Wireless Gateway based on Enc Gateway -304 KIT”的版本间的差异

来自Microduino Wikipedia
跳转至： 导航、 搜索
（→‎Bill of Materials）
Pkj（讨论 | 贡献）
（→‎Debugging）
第55行： 第55行：
 
|
 
|
 
==Debugging==
 
==Debugging==
−
Step 1：Set up hardware
+
Step 1：Build the hardware
  
−
Control master：
+
Master machine control：
  
 
Equipment：Microduino-Core+, Microduino Duo-V, Microduino-Enc, Microduino-nRF24, Router and network cables.
 
Equipment：Microduino-Core+, Microduino Duo-V, Microduino-Enc, Microduino-nRF24, Router and network cables.
  
−
Control slave：
+
Slave machine control：
  
 
Equipment：Microduino-Core, Microduino-nRF24 and Microduino-FT232R
 
Equipment：Microduino-Core, Microduino-nRF24 and Microduino-FT232R
第69行： 第69行：
 
|-
 
|-
 
|
 
|
−
Step 2: Set up network
+
Step 2: Build the network
  
−
Power on router, and connect the PC to network.
+
Power router and connect the PC to network.
  
−
Step 3: Download program
+
Step 3: Download the program
  
−
Start Arduino IED, open the Microduino example program, master board type choose "Microduino Core +(Atmega644P@16M,5V)", slave board type choose "Microduino Core (Atmega328P@16M,5V)", download directly.
+
Start Arduino IED, open the Microduino example program and choose "Microduino Core +(Atmega644P@16M,5V)" as the board of the master machine and "Microduino Core (Atmega328P@16M,5V)" as the board of the slave machine, then download directly.
  
−
Step 4: Control LED in local network
+
Step 4: Control the LED in the LAN
−
 
 
−
Open a new web page, enter into your ip address. Microduiono networking success can enter the control interface, or can not be opened.
 
  
 +
Open a new webpage, enter your IP address and you'll enter the control interface if you can connect the network successfully.
 
|-
 
|-
 
|
 
|

2014年8月25日 (一) 04:01的版本

Language English

Outline

Project：Microduino-NRF Wireless Communication Based on Microduino-Enc Gateway

Objective：To set up a network with Microduino-Enc, PC and router，using Microduino-NRF to control the LED in the LAN.

Difficulty：Elementary

Time-consuming：Two-hour

Maker：Microduino Studio-YLB

Bill of Materials

  • Microduino equipment：
Module Number Function
Microduino-Core+/Microduino-Core 1 It is served as a host machine,sending control signal
Microduino-Core 1 It is served as a slave machine, receiving control signal
Microduino-FT232R 1 For program download
Microduino-Enc 1 For network communication
Microduino-nRF24 2 For wireless communication between the host and the slave machine
Microduino Duo-V 1 For ease of building the circuit and debugging
  • Other equipment：
Router one
Network cable one
Micro USB cable Two
LED one
304201KIT-module

Document

Debugging

Step 1：Build the hardware

Master machine control：

Equipment：Microduino-Core+, Microduino Duo-V, Microduino-Enc, Microduino-nRF24, Router and network cables.

Slave machine control：

Equipment：Microduino-Core, Microduino-nRF24 and Microduino-FT232R

304201KIT-system

Step 2: Build the network

Power router and connect the PC to network.

Step 3: Download the program

Start Arduino IED, open the Microduino example program and choose "Microduino Core +(Atmega644P@16M,5V)" as the board of the master machine and "Microduino Core (Atmega328P@16M,5V)" as the board of the slave machine, then download directly.

Step 4: Control the LED in the LAN

Open a new webpage, enter your IP address and you'll enter the control interface if you can connect the network successfully.

Myip

Result

After download, Microduino core accessed the network, then open the gateway, click button on control interface to control the corresponding node led, each time you press the button, the led will have a state transition. Because it is a node control, so only the node that slave program seted can be controled by the gateway control interface's node.

Note

  • Microduino Enc must be used with Microduino RJ45 together.
  • Need configure the MAC address and ip address in local network.
  • The gateway node and slave machine node should be matched.

Video

http://v.youku.com/v_show/id_XNjY1NzE3NDQ0.html

取自“http:///https//wiki.microduino.cn/index.php?title=Microduino_NRF_Wireless_Gateway_based_on_Enc_Gateway_-304_KIT&oldid=3945”