“Microduino-USBHOST”的版本间的差异

来自Microduino Wikipedia
跳转至: 导航搜索
Pkj讨论 | 贡献
Specifications
第19行: 第19行:
 
*Electrical specifications
 
*Electrical specifications
 
**3.3V or 5V power;
 
**3.3V or 5V power;
**USB host uses power protocol of 5V/500mA;
+
**5V/500mA power protocol of the USB host;
**Using TC74HC4050 level conversion chip, provides the high anti-interference and stable output;
+
**Adopt TC74HC4050 level conversion chip and ensure high anti-interference and stable output;
**D+, D- and VBCOMP has ESD protection function;
+
**D+, D- and VBCOMP with ESD protection function;
**The firmware/hardware control internal D+ pull up resistors (peripherals mode) and D+/D- pull down resistor (host mode);
+
**The internal D+ pull-up resistor (peripherals mode) and D+/D- pull-down resistor (host mode) controlled by firmware/hardware;
  
 
*Communication
 
*Communication
**Compatible with the MAX3420E USB peripheral which has the SPI interface;
+
**Compatible with MAX3420 MAX3420E USB peripheral device control software with SPI interface;
**Comply with USB 2.0 specification (12 Mbps peripherals at full speed, full speed/low speed 12Mbps/1.5 Mbps host);
+
**Comply with USB 2.0 specification (12 Mbps peripherals at full speed and 12Mbps/1.5 Mbps host at full speed/low speed);
 
**Smart USB SIE;
 
**Smart USB SIE;
 
**Automatic processing of USB flow control and double buffer;
 
**Automatic processing of USB flow control and double buffer;
 
**Process low level USB signaling.
 
**Process low level USB signaling.
  
*Supported devices:
+
*Device Support:
 
**HID devices, such as keyboards, mouse, joystick and so on;
 
**HID devices, such as keyboards, mouse, joystick and so on;
**Game controller - Sony PS3,Nintendo Wii,XBOX360;
+
**Game controller: Sony PS3,Nintendo Wii and XBOX360;
**USB-to-serial converter - FTDI,PL-2303,ACM,mobile phones with OTG function and GPS receiver;
+
**USB-to-serial converter: FTDI,PL-2303,ACM and mobile phones with OTG function and GPS receiver;
 
**Android mobile with ADK function;
 
**Android mobile with ADK function;
**Digital Camera - Canon EOS's Powershot, Nikon digital SLR cameras and P&S, and general PTP;
+
**Digital Camera: Canon EOS's Powershot, Nikon digital SLR cameras and P&S as well as general PTP;
**Mass storage devices, such as U disk, card reader, external hard drive;
+
**Mass storage devices, such as U disk, card reader and the external hard drive;
 
**Bluetooth dongle.
 
**Bluetooth dongle.
  

2014年8月1日 (五) 09:22的版本

Language English
Microduino-USBHOST

Microduino USBHOST mainly offers the USB host function for devices, supporting USB host controller and USB peripherals, such as mobile phones with OTG function, keyboards, joystick, and camera.

Features

  • Support MicroUSB interface;
  • Small, cheap, stackable and open;
  • Open hardware circuit design and Arduino compatible programming development environment;
  • Uniformed Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors in accord with Microduino interface standard;
  • Easy to be integrated to pegboards with a 2.45-pitch female header connector interface.

Specifications

  • Electrical specifications
    • 3.3V or 5V power;
    • 5V/500mA power protocol of the USB host;
    • Adopt TC74HC4050 level conversion chip and ensure high anti-interference and stable output;
    • D+, D- and VBCOMP with ESD protection function;
    • The internal D+ pull-up resistor (peripherals mode) and D+/D- pull-down resistor (host mode) controlled by firmware/hardware;
  • Communication
    • Compatible with MAX3420 MAX3420E USB peripheral device control software with SPI interface;
    • Comply with USB 2.0 specification (12 Mbps peripherals at full speed and 12Mbps/1.5 Mbps host at full speed/low speed);
    • Smart USB SIE;
    • Automatic processing of USB flow control and double buffer;
    • Process low level USB signaling.
  • Device Support:
    • HID devices, such as keyboards, mouse, joystick and so on;
    • Game controller: Sony PS3,Nintendo Wii and XBOX360;
    • USB-to-serial converter: FTDI,PL-2303,ACM and mobile phones with OTG function and GPS receiver;
    • Android mobile with ADK function;
    • Digital Camera: Canon EOS's Powershot, Nikon digital SLR cameras and P&S as well as general PTP;
    • Mass storage devices, such as U disk, card reader and the external hard drive;
    • Bluetooth dongle.
  • Pin description:
Chip Pin Microduino Pin Function
RES RST reset chip
SCLK D13 SPI serial clock input
SS D5 SPI slave select input
MISO D12 SPI serial data output
MOSI D11 SPI serial data input
INT D4 Interrupt output
文件:Microduino-USBHOST-Pinout.jpg
Microduino-USBHOST-Pinout

Document

Eagle PCB local download Main components:

Development

An ordinary Bluetooth adapter. You can easily add different Bluetooth services, such as a PS3 or Wii controller or SPP which is supported through Bluetooth virtual serial port. A number of different examples can be found in the examples directory.

    • HID library:

Connect USB peripherals. Such as a mouse, handle etc.

    • BTHID library:

Connect HID devices via Bluetooth, currently supports HID mouse and keyboard.

    • SPP library:

Allow you send data to your Microduino from PM/mobile phone via Bluetooth.

    • PS4 Library:

Allow you to use the Sony PS4 controller via Bluetooth and USB.

    • PS3 Library:

Use DUALSHOCK3, navigation or motion controller via Bluetooth and USB.

    • Xbox Libraries:
    • Xbox Libraries:

The library uses USB as the Xbox 360 controller.

Application

Light a LED via a mobile using the ADK example library:

Prepare work

  • Prepared hardware:Microduino FT232R, Microduino Core, Microduino USBHOST, OTG cable, make sure your Android device supports and turn on the USB debug mode, USB cable;
  • Prepared software:USB_Host_Shield_2.0 library, Arduino IDE(1.0 release and upper);
  • Uncompress the zip folder and rename to “USB_Host_Shield” becasue Arduino IDE doesn't support any special characters, then copy to libraries folder of Arduino IDE;
  • Connect the Microduino FT232R and PC using USB cable to download program and serial monitor;
  • Connect a LED to I/O port D6 of Microduino-Core;

Debug

  • Open the example program "ArduinoBlinkLED" from ADK folder of examples;
  • Change LED_BUILTIN to Microduino pin in "#define LED LED_BUILTIN", such as "#define LED 6". But can't be D13, because D13 is used as SCK.
  • After compiled, select the board "Microduino Core (Atmega328P@16M,5V)", download directly;
  • Connect the mobile phone and Microduino USBHOST by OTG cable and USB cable;
  • Open the serail monitor, will display "Arduino Blink LED Started";
  • The phone will automatically pop up the application "ArduinoBlinkLED", download and install it;
  • After installed the application, will prompte to open the USB connection fittings, and click OK to enter the program interface;
  • Successful connection will show "connected", and can control the LED light on and off via the button.

Bug

History

Picture

Front

Microduino-USBHOST Front

Back

Microduino-USBHOST Back

Video