Microduino-KEYBOARD

Language	English

文件:Microduino-KEYBOARD-rect.jpg Microduino-KEYBOARD Sensor Microduino-KEYBOARD Sensor consists of eight keys with an analog interface output. Feature Adopt resistance divider and eight keys can be recognized by one single I/O. Small size and easy for installation. Specification Eight keys to match different resistance values; 1.27mm-pitch 4Pin interface; Size: 20.32*20.32mm Operation voltage: 5V 文件:Microduino-KEYBOARD Sensor rule1.jpg 600px 文件:Microduino-KEYBOARD Sensor rule2.jpg 600px Document Schematic：文件:Microduino KEYBOARD.Zip Development The analog key is used for detecting analog quantity. Each key is used to match different resistor for grounding on one side and connects VCC through a resistor one the other side. By pressing each key, you can get different analog values. Thus, you can tell the key from different analog value. With only one I/O interface, you can tell eight keys, which saves a lot. Application Hardware needed: Microduino-Core, Microduino-USBTTL, Microduino-Sensorhub, USB cable and connectors; Stack all the modules and then connect KEYBOARD to A0 pin of Sensorhub with wires. Open Arduino IDE, select File→Examples→Basics→AnalogReadSerial, choose the right board and download after compiling. Open serial monitor after download, press different keys and watch reading changes as well as the return values. So, you can judge which press is pressed by the return values and readings. Purchase History Pictures Front 文件:Microduino-KEYBOARD Sensor-F.JPG Microduino-Cube-Station Front Back 文件:Microduino-KEYBOARD Sensor -b.JPG Microduino-Cube-Station Back