Microduino GPS recorder-306KIT
| Language | English |
|---|
OutlineProject：Microduino GPS Recorder Objective：Adopt the Microduino GPS module to acquire the geographic information and store it into Microduino-SD. Difficulty：Elementary Time-consuming：2 hours Maker：Microduino Studio-YLB | ||||||||||||||||||
Bill of Materials
| ||||||||||||||||||
|
文件:GPS-module.jpg 306KIT picture | ||||||||||||||||||
Document | ||||||||||||||||||
DebugStep 1：Build the hardware Stack all the modules. Just put the GPS antenna outside, or it can not receive the signal. | ||||||||||||||||||
|
文件:306KIT-1.jpg 306KIT 文件:306KIT-2.jpg 306KIT | ||||||||||||||||||
|
Step 2：Download the program If wanting to keep the default jumper (RX0、TX1), you need to unplug the Microduino NEO-6M during the download； Step 3：Debug Find an open area to debug for better signal. The current status of the module can be judged by the PPS indicator: lighting, indicates that the module has started to work, but hasn't achieved position information. Flashing (100ms off, 900ms bright), means that the module has been successfully positioned. | ||||||||||||||||||
ResultAfter get the position information, the parameters can be seen, and these data can be recorded into the memory card.
| ||||||||||||||||||
Note
Video |
