“Microduino-GPRS/GSM”的版本间的差异

来自Microduino Wikipedia
跳转至: 导航搜索
Debugging
第29行: 第29行:
 
**Build-in TCP/IP protocol;
 
**Build-in TCP/IP protocol;
 
**Encoding format:CS-1, CS-2, CS-3 and CS-4;
 
**Encoding format:CS-1, CS-2, CS-3 and CS-4;
**Support Unstructured Supplementary Service Data(USSD)
+
**Support Unstructured Supplementary Service Data (USSD)
  
 
*Serial debugging
 
*Serial debugging
第35行: 第35行:
 
**Support the serial port multiplexing function complying with GSM 07.10 protocol;
 
**Support the serial port multiplexing function complying with GSM 07.10 protocol;
  
*Two Main Compoments:
+
*Two Main Components:
 
**SIM800L module
 
**SIM800L module
 
[[file:Microduino-SIM800L-Pinout1.jpg|800px|thumb|center|Microduino-SIM800L-Pinout]]
 
[[file:Microduino-SIM800L-Pinout1.jpg|800px|thumb|center|Microduino-SIM800L-Pinout]]
第45行: 第45行:
 
==Document==
 
==Document==
 
*Eagle PCB: '''[[File:Microduino-GSM.zip]]'''
 
*Eagle PCB: '''[[File:Microduino-GSM.zip]]'''
* Microduino-GSM mudule SIM800L:'''[[File:SIM800L.pdf]]'''
+
* Microduino-GSM module SIM800L:'''[[File:SIM800L.pdf]]'''
 
*SIM car power supply and the card base:'''[[File:SIM800L.pdf]]'''
 
*SIM car power supply and the card base:'''[[File:SIM800L.pdf]]'''
  
第54行: 第54行:
  
 
==Application==
 
==Application==
Sending short messages through the example program in the library.
+
Send short messages using the example program.
 
===Preparation===
 
===Preparation===
 
*Hardware:Microduino FT232R, Microduino Core, Microduino GSM, USB cable or lithium battery;
 
*Hardware:Microduino FT232R, Microduino Core, Microduino GSM, USB cable or lithium battery;
 
*Software: GSM library, Arduino IDE (version 1.0.3 and higher);
 
*Software: GSM library, Arduino IDE (version 1.0.3 and higher);
*Uncompress the zip folder to libraries of Arduino IDE;
+
*Uncompressed the zip folder to libraries of Arduino IDE;
 
*Connect the Microduino FT232R and PC using USB cable to download program and monitor the serial port;
 
*Connect the Microduino FT232R and PC using USB cable to download program and monitor the serial port;
 
*USB cable or li-ion battery to charge the Microduino GSM module and press the power button for a long time to activate Microduino GSM for about 4 seconds. That the power-on indicator goes on shows a successful start.
 
*USB cable or li-ion battery to charge the Microduino GSM module and press the power button for a long time to activate Microduino GSM for about 4 seconds. That the power-on indicator goes on shows a successful start.
第65行: 第65行:
 
*Download the test program:
 
*Download the test program:
 
https://github.com/Microduino/Microduino_Tutorials/commit/25a821ba8894fb02d4b1560c9912450cc353b875
 
https://github.com/Microduino/Microduino_Tutorials/commit/25a821ba8894fb02d4b1560c9912450cc353b875
*Open the test program, you need double check the following parameter:
+
*Open the test program, and then you need double check the following parameter:
 
**“#define NUM "13667928xxx"”:Need change to the number that receive message.
 
**“#define NUM "13667928xxx"”:Need change to the number that receive message.
**“#define SMS_CEN "13010720xxx"”:Your message center for you own mobile phone number, you can find it in your phone. It isn't the nessary. If hit an issue during send a message, you can try it.
+
**“#define SMS_CEN "13010720xxx"”:Your message center for you own mobile phone number, you can find it in your phone. It isn't the necessary. If hit an issue during send a message, you can try it.
*Compile the program, select the boardy type "Microduino Core+ (Atmega644P@16M,5V)", download directly:
+
*Compile the program, select the board type "Microduino Core+ (Atmega644P@16M,5V)", download directly:
 
*Open the serial monitor, set the baud rate is 9600:
 
*Open the serial monitor, set the baud rate is 9600:
 
**Input "t", to send the message "wiki.microduino.cc";
 
**Input "t", to send the message "wiki.microduino.cc";
 
**Input "d", you can make a call, but can't finish a normal call, because no the speaker and microphone;
 
**Input "d", you can make a call, but can't finish a normal call, because no the speaker and microphone;
 
**Input "h", you can submit a HTTP request to get some data from network;
 
**Input "h", you can submit a HTTP request to get some data from network;
**Input "s", you can send the sensor data to newtork.
+
**Input "s", you can send the sensor data to network.
  
 
*如果你使用Microduino Core调试,你需要用到软串口(TX1,RX1)
 
*如果你使用Microduino Core调试,你需要用到软串口(TX1,RX1)
*If you use the Microduino Cort to debug, must use the SoftwareSerail (TX1,RX1)
+
*If you use the Microduino Core to debug, must use the Software Serail (TX1,RX1)
**Use the SoftwareSerial library
+
**Use the Software Serial library
 
<source lang="cpp">
 
<source lang="cpp">
 
#include <SoftwareSerial.h>
 
#include <SoftwareSerial.h>
第85行: 第85行:
 
**Change the Serial1 to mySerial, it should be ok。
 
**Change the Serial1 to mySerial, it should be ok。
  
*If you use the Microduino CoreUSB to debug, you only need to change the serail to serial 0 (TX0,RX0).
+
*If you use the Microduino CoreUSB to debug, you only need to change the serial to serial 0 (TX0,RX0).
 
[[file:Microduino-SIM800L-Pinout2.jpg|800px|thumb|center|Microduino-SIM800L-Pinout]]
 
[[file:Microduino-SIM800L-Pinout2.jpg|800px|thumb|center|Microduino-SIM800L-Pinout]]
  

2014年8月12日 (二) 06:41的版本

Language English
Microduino-USBHOST

Microduino-GPRS/GSM module can get Microduino core board connected to the internet and achieve the function of sending and receiving messages when it is just inserted with a SIM card and follows some simple instructions.

Features

  • ESD protection;
  • Capable of being charged by USB, li-ion or other power supply options;
  • Support automatic baud rate detection function;
  • Capable of sending AT instructions and data through the serial port;
  • Small, cheap, stackable and open;
  • Open hardware circuit design and Arduino compatible programming development environment;
  • Uniformed Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors in accord with Microduino interface standard;
  • Easy to be integrated to pegboards with a 2.45-pitch female header connector interface.

Specifications

Adopt SIM800L module to support four-band GSM/GPRS, whose working band is:GSM850, EGSM900, DCS1800 and PCS1900MHz.

  • Electrical characteristics
    • Working voltage:3.4V ~4.4V;
    • The current consumption is 0.7 mA under the Sleep Mode
  • GPRS data
    • The maximum data transmission rate of GPRS is 85.6 kbps;;
    • Build-in TCP/IP protocol;
    • Encoding format:CS-1, CS-2, CS-3 and CS-4;
    • Support Unstructured Supplementary Service Data (USSD)
  • Serial debugging
    • Support standard full-function serial as well as the transmission rate with a range from 1200bps to 115200bps;
    • Support the serial port multiplexing function complying with GSM 07.10 protocol;
  • Two Main Components:
    • SIM800L module
文件:Microduino-SIM800L-Pinout1.jpg
Microduino-SIM800L-Pinout
文件:Microduino-SIM800L-Pinout2.jpg
Microduino-SIM800L-Pinout
    • SIM card power and base plant
文件:Microduino-SIM-Pinout1.jpg
Microduino-SIM-Pinout
文件:Microduino-SIM-Pinout2.jpg
Microduino-SIM-Pinout

Document

Development

You can use GSM library to test, https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Libraries/_03_Microduino_GSM_SIM800L

Note:This library only supports Microduino-core.

Application

Send short messages using the example program.

Preparation

  • Hardware:Microduino FT232R, Microduino Core, Microduino GSM, USB cable or lithium battery;
  • Software: GSM library, Arduino IDE (version 1.0.3 and higher);
  • Uncompressed the zip folder to libraries of Arduino IDE;
  • Connect the Microduino FT232R and PC using USB cable to download program and monitor the serial port;
  • USB cable or li-ion battery to charge the Microduino GSM module and press the power button for a long time to activate Microduino GSM for about 4 seconds. That the power-on indicator goes on shows a successful start.

Debugging

  • Download the test program:

https://github.com/Microduino/Microduino_Tutorials/commit/25a821ba8894fb02d4b1560c9912450cc353b875

  • Open the test program, and then you need double check the following parameter:
    • “#define NUM "13667928xxx"”:Need change to the number that receive message.
    • “#define SMS_CEN "13010720xxx"”:Your message center for you own mobile phone number, you can find it in your phone. It isn't the necessary. If hit an issue during send a message, you can try it.
  • Compile the program, select the board type "Microduino Core+ (Atmega644P@16M,5V)", download directly:
  • Open the serial monitor, set the baud rate is 9600:
    • Input "t", to send the message "wiki.microduino.cc";
    • Input "d", you can make a call, but can't finish a normal call, because no the speaker and microphone;
    • Input "h", you can submit a HTTP request to get some data from network;
    • Input "s", you can send the sensor data to network.
  • 如果你使用Microduino Core调试,你需要用到软串口(TX1,RX1)
  • If you use the Microduino Core to debug, must use the Software Serail (TX1,RX1)
    • Use the Software Serial library
#include <SoftwareSerial.h>

SoftwareSerial mySerial(2, 3); // RX, TX
    • Change the Serial1 to mySerial, it should be ok。
  • If you use the Microduino CoreUSB to debug, you only need to change the serial to serial 0 (TX0,RX0).
文件:Microduino-SIM800L-Pinout2.jpg
Microduino-SIM800L-Pinout

FQA

  • Does this module can be used to make a voice phone? Any voice pin was picked out?
    • This module can’t be made a voice phone, because it doesn’t have pin.
  • Does this module can work with Core+ module?
    • Yes.
  • Does this module can use Arduino GSM library?
    • Yes.
  • Does this module can use to 3G?
    • No, it only supports GPRS and GSM.
  • How to power on this module?
    • There are two methods:
      • Using the USB on attached module to supply the power, the voltage is 5V and the current MUST lager than 1A.
      • Using Li-ion battery on attached module to supply the power, the Li-ion should be 3.7V.

BM module can power on the Core module and other module, such as 10DOF, but don't suggest to power GPRS/GSM module, because it is a big power consumption module.

Purchase

History

Picture

Microduino-GPRS/GSM Front
Microduino-GPRS/GSM Front
Microduino-GPRS/GSM Front
Microduino-GPRS/GSM Front

Video