“Microduino-Cube-S1”的版本间的差异

来自Microduino Wikipedia
跳转至: 导航搜索
Specification
Pkj讨论 | 贡献
Document
第30行: 第30行:
  
 
==Document==
 
==Document==
Eagle PCB local downlaod
+
Eagle PCB: '''[[File:Microduino-Cube-S1.zip]]'''
Main components:
+
 
*3.3V Regulator chip LP2985: '''[[File:LP2985.pdf]]'''
+
Main Component:
 +
*3.3V Voltage Stablizing chip LP2985: '''[[File:LP2985.pdf]]'''
  
 
==Development==
 
==Development==

2014年8月15日 (五) 07:00的版本

Language English
Microduino-Cube-S1

Features

  • Compatible with the pin of Arduino Uno;
  • Uniformed Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard;
  • Onboard analog button and sensor interface;

Specification

  • Electrical specification
    • MicroUSB power supply;
    • 3.3V constant voltage;
    • Select the 5V or 3.3V power via PWR jumper(The default voltage is 3.3V);
    • Onboard power supply indicator(5V and PWR) ;
  • Extension
    • Onboard reset button;
    • The fixed OLED base;
    • Two serial ports including (RX0,TX0)and (D2,D3);
    • Two IIC interfaces;
      • Two analog button interfaces connected to A7;
    • The sensor interface can be selected and combined through jumpers:
      • PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND (Users can make the connection as they like).
文件:Microduino-Cube-S1-Pinout2.jpg
Microduino-Cube-S1-Pinout
文件:Microduino-Cube-S1-Pinout3.jpg
Microduino-Cube-S1-Pinout

Document

Eagle PCB: 文件:Microduino-Cube-S1.zip

Main Component:

Development

It can be used with other Microduino modules, sensor to achieve specific functions.

Microduino-Cube-S1

Application

  • You can download the test example, and combine OLED to test two analogy of Microduino-Cube-S1, test program:

https://github.com/Microduino/Microduino_Tutorials/commit/b0e0fe74269ee0f6a886d8fa8db497ec57cc4073

  • Prepared hardware:Microduino FT232R, Microduino Core, Microduino-Cube-S1, Microduino OLED;
  • Prepared software:Microduino example program (Arduino part), Arduino IDE(1.0 release and upper);
  • Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", download directly;
  • After download, OLED displays "No button is pressed ",
    • Press the left button, OLED displays "Press the left button" which means the left button was pressed;
    • Press the right button, OLED displays "Press the rignt button" which means the right button was pressed;
    • If no button was pressed, OLED displays "No button is pressed ", the same state with initial state.

Bug

History

Picture

Front

Microduino-Cube-S1 Front

Back

Microduino-Cube-S1 Back

Video