“Microduino-Core”的版本间的差异

来自Microduino Wikipedia
跳转至: 导航搜索
第4行: 第4行:
 
[[file:Microduino-core-rect.jpg|400px|thumb|right|Microduino-Core]]
 
[[file:Microduino-core-rect.jpg|400px|thumb|right|Microduino-Core]]
  
'''[[Microduino-Core]]''' is one of core modules of Microduino series, '''[[Microduino-Core]]'''  
+
'''[[Microduino-Core]]''' is one of core modules of Microduino series, '''[[Microduino-Core]]''' is an open source hardware and Arduino Uno compatible. It is an 8-bit microcontroller development board, based on Atmel ATmega328P/ATmega168PA series.
 
 
is an open source hardware and Arduino Uno compatible. It is an 8-bit microcontroller development  
 
 
 
board, based on Atmel ATmega328P/ATmega168PA series.
 
  
 
Comparing to Arduino Uno, '''[[Microduino-Core]]''' is featured by:
 
Comparing to Arduino Uno, '''[[Microduino-Core]]''' is featured by:
* Microduino splits '''[http://arduino.cc/en/Main/ArduinoBoardUno Arduino Uno]''' into two parts:  
+
* Microduino splits '''[http://arduino.cc/en/Main/ArduinoBoardUno Arduino Uno]''' into two parts: '''[[Microduino-Core]]''' and '''[[Microduino-FT232R]]''' modules -- MCU and USB2TTL parts. it means once designers uploaded program into '''[[Microduino-Core]]''', '''[[Microduino-FT232R]]''' will be not necessary anymore, designers could have many Microduino-Core/Core+ modules with only one '''[[Microduino-FT232R]]'''. The board size becomes very small as only 25.4mm X 27.94mm (1.0inch X 1.1inch), like a quarter.
 
+
* Microduino series uses the U-Shape 27-pin interface (UPin-27), the standard interface of Microduino, all Microduino modules and sensors can be easily stacked and extended, it is delivered ready to plug in.
'''[[Microduino-Core]]''' and '''[[Microduino-FT232R]]''' modules -- MCU and USB2TTL parts. it  
+
* With tiny shape and uniform interface, Microduino series dramatically decreases the size and cost of design prototype, remarkable improves usability and flexibility of Arduino-compatible boards, as well as user experience.
 
 
means once designers uploaded program into '''[[Microduino-Core]]''', '''[[Microduino-FT232R]]'''  
 
 
 
will be not necessary anymore, designers could have many Microduino-Core/Core+ modules with only  
 
 
 
one '''[[Microduino-FT232R]]'''. The board size becomes very small as only 25.4mm X 27.94mm  
 
 
 
(1.0inch X 1.1inch), like a quarter.
 
* Microduino series uses the U-Shape 27-pin interface (UPin-27), the standard interface of  
 
 
 
Microduino, all Microduino modules and sensors can be easily stacked and extended, it is delivered  
 
 
 
ready to plug in.
 
* With tiny shape and uniform interface, Microduino series dramatically decreases the size and  
 
 
 
cost of design prototype, remarkable improves usability and flexibility of Arduino-compatible  
 
 
 
boards, as well as user experience.
 
 
 
 
 
Microduino uses the same development environment as Arduino IDE, designers can use the Arduino
 
 
 
IDE, Processing on Microduino for idea realization, prototype development and low volume
 
 
 
production.
 
  
Microduino uses optiboot for bootloader, it takes less Flash than Arduino default engine and  
+
Microduino uses the same development environment as Arduino IDE, designers can use the Arduino IDE, Processing on Microduino for idea realization, prototype development and low volume production.
  
optimizes program uploading.
+
Microduino uses optiboot for bootloader, it takes less Flash than Arduino default engine and optimizes program uploading.
  
 
Currently, there are 4 different configurations for '''[[Microduino-Core]]''' modules:
 
Currently, there are 4 different configurations for '''[[Microduino-Core]]''' modules:
第82行: 第53行:
 
|}
 
|}
 
Different configurations in frequency and supply voltage:
 
Different configurations in frequency and supply voltage:
* Clock frequency and supply voltage are paired, 8M module is supplied by 3.3V voltage, while 16M  
+
* Clock frequency and supply voltage are paired, 8M module is supplied by 3.3V voltage, while 16M module is by 5.0V voltage.  
 
+
* A 16M with 5V '''[[Microduino-Core]]''' module is recommended for desktop equipments or designs; regarding mobile equipments or designs, a 8M with 3.3V module is suggested for low power and battery supply purposes.
module is by 5.0V voltage.  
 
* A 16M with 5V '''[[Microduino-Core]]''' module is recommended for desktop equipments or designs;  
 
 
 
regarding mobile equipments or designs, a 8M with 3.3V module is suggested for low power and  
 
 
 
battery supply purposes.
 
  
  
第96行: 第61行:
 
|
 
|
 
==Core vs Core+==
 
==Core vs Core+==
* Microduino also provides '''[[Microduino-Core+]]''' module, aiming at high performance  
+
* Microduino also provides '''[[Microduino-Core+]]''' module, aiming at high performance applications which require large SRAM/EEPROM/Flash and more I/O ports.
 
 
applications which require large SRAM/EEPROM/Flash and more I/O ports.
 
 
 
* Both '''[[Microduino-Core]]''' and '''[[Microduino-Core+]]''' use UPin-27 interface -- the
 
 
 
standard module interface of Microduino series. The main difference between them is MCU chip: -
 
  
Core module uses ATmega328P/ATmega168PA, as same as Arduino Uno; -Core+ module uses  
+
* Both '''[[Microduino-Core]]''' and '''[[Microduino-Core+]]''' use UPin-27 interface -- the standard module interface of Microduino series. The main difference between them is MCU chip: -Core module uses ATmega328P/ATmega168PA, as same as Arduino Uno; -Core+ module uses ATmega644PA/ATmega1284P, its performance is similar to Arduino Mega2560.
 
 
ATmega644PA/ATmega1284P, its performance is similar to Arduino Mega2560.
 
  
 
* Configuration difference between '''[[Microduino-Core]]''' and '''[[Microduino-Core+]]'''  
 
* Configuration difference between '''[[Microduino-Core]]''' and '''[[Microduino-Core+]]'''  
第159行: 第116行:
 
|}
 
|}
  
* According above table, Core and Core+ are different in Flash, EEPROM and SRAM size, also, they  
+
* According above table, Core and Core+ are different in Flash, EEPROM and SRAM size, also, they supply different size of digital I/O and hardware serial ports, and there are 10 more digital I/O and 1 more hardware serial ports in Core+. Designers can select specific module regarding different application requirements on function, performance and power.  
 
 
supply different size of digital I/O and hardware serial ports, and there are 10 more digital I/O  
 
 
 
and 1 more hardware serial ports in Core+. Designers can select specific module regarding  
 
 
 
different application requirements on function, performance and power.  
 
 
 
* Both Core and Core+ use UPin-27 interface, Microduino program can be smoothly ported between
 
  
them.
+
* Both Core and Core+ use UPin-27 interface, Microduino program can be smoothly ported between them.
  
 
|-
 
|-
第195行: 第144行:
 
* DC Current:  50 mA
 
* DC Current:  50 mA
 
* Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data.
 
* Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data.
* External Interrupts: 2 and 3. These pins can be configured to trigger an interrupt on a low  
+
* External Interrupts: 2 and 3. These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value. See the attachInterrupt() function for details.
 
 
value, a rising or falling edge, or a change in value. See the attachInterrupt() function for  
 
 
 
details.
 
 
* PWM: 3, 5, 6, 9, 10, and 11. Provide 8-bit PWM output with the analogWrite() function.
 
* PWM: 3, 5, 6, 9, 10, and 11. Provide 8-bit PWM output with the analogWrite() function.
 
* SPI: 10 (SS), 11 (MOSI), 12 (MISO), 13 (SCK). These pins support SPI communication using the SPI  
 
* SPI: 10 (SS), 11 (MOSI), 12 (MISO), 13 (SCK). These pins support SPI communication using the SPI  
第278行: 第223行:
 
==Development==
 
==Development==
 
* Microduino Arduino IDE Configuration
 
* Microduino Arduino IDE Configuration
** 1. Install Arduino IDE: Microduino use the same IDE as Arduino, please download Arduino IDE  
+
** 1. Install Arduino IDE: Microduino use the same IDE as Arduino, please download Arduino IDE from 【'''[http://arduino.cc/en/Main/Software Arduino IDE official]'''】 and install it in your disk. (if you already have it, just skip this step). Please check Arduino IDE details from 【'''[http://arduino.cc/en/Reference/HomePage Reference]'''】 and 【'''[http://arduino.cc/en/Tutorial/HomePage Workshop]'''】.  
 
+
** 2. Patch Microduino package: Please download Microduino package for Arduino IDE from 【'''[[media:Microduino.zip|download]]'''】, and unzip is to {Your Arduino Install Driectory}/hardware directory.
from 【'''[http://arduino.cc/en/Main/Software Arduino IDE official]'''】 and install it in your  
 
 
 
disk. (if you already have it, just skip this step). Please check Arduino IDE details from  
 
 
 
【'''[http://arduino.cc/en/Reference/HomePage Reference]'''】 and  
 
 
 
【'''[http://arduino.cc/en/Tutorial/HomePage Workshop]'''】.  
 
** 2. Patch Microduino package: Please download Microduino package for Arduino IDE from  
 
 
 
【'''[[media:Microduino.zip|download]]'''】, and unzip is to {Your Arduino Install  
 
 
 
Driectory}/hardware directory.
 
 
** Microduino Arduino IDE Reference workshop: 【'''[[Arduino IDE Microduino Configuration]]'''】.  
 
** Microduino Arduino IDE Reference workshop: 【'''[[Arduino IDE Microduino Configuration]]'''】.  
** 3. Programming: To upload program to Microduino-Core/Core+ through Arduino IDE, designers are  
+
** 3. Programming: To upload program to Microduino-Core/Core+ through Arduino IDE, designers are recommended to use '''[[Microduino-FT232R]]''' module.
 
 
recommended to use '''[[Microduino-FT232R]]''' module.
 
 
** 4. Enjoy your Microduino journey!
 
** 4. Enjoy your Microduino journey!
  
 
* Burn Microduino BootLoader
 
* Burn Microduino BootLoader
** Bootloader burning is necessary if designers want to update Microduino-Core/Core+ firmware by  
+
** Bootloader burning is necessary if designers want to update Microduino-Core/Core+ firmware by themselves, designers can leaverage Arduino Uno or another burned Microduino-Core/Core+ to make a new one.
 
+
** Microduino bootloader workshop: 【'''[[Burn Bootloader to Microduino-Core/Core+ with an Arduino]]'''】.
themselves, designers can leaverage Arduino Uno or another burned Microduino-Core/Core+ to make a  
+
** Bootloader is specified for different Microduino-Core/Core+ configurations, correct one must be selected during burning.
 
+
** Initial bootloader is designed for ATmegaX8 series optiboot, which occupies only 512 bytes flash.
new one.
 
** Microduino bootloader workshop: 【'''[[Burn Bootloader to Microduino-Core/Core+ with an  
 
 
 
Arduino]]'''】.
 
** Bootloader is specified for different Microduino-Core/Core+ configurations, correct one must be  
 
 
 
selected during burning.
 
** Initial bootloader is designed for ATmegaX8 series optiboot, which occupies only 512 bytes  
 
 
 
flash.
 
 
|-
 
|-
 
|
 
|
第326行: 第247行:
  
 
==Buy==
 
==Buy==
* Buy '''[http://www.ebay.com Microduino@eBay]'''
+
* Buy '''[http://www.microduino.cc/Modules/Microdoino%20Core%20Modules/Microdoino-Core Microduino-Core]'''
  
 
|-
 
|-

2013年12月15日 (日) 09:41的版本

Microduino-Core

Microduino-Core is one of core modules of Microduino series, Microduino-Core is an open source hardware and Arduino Uno compatible. It is an 8-bit microcontroller development board, based on Atmel ATmega328P/ATmega168PA series.

Comparing to Arduino Uno, Microduino-Core is featured by:

  • Microduino splits Arduino Uno into two parts: Microduino-Core and Microduino-FT232R modules -- MCU and USB2TTL parts. it means once designers uploaded program into Microduino-Core, Microduino-FT232R will be not necessary anymore, designers could have many Microduino-Core/Core+ modules with only one Microduino-FT232R. The board size becomes very small as only 25.4mm X 27.94mm (1.0inch X 1.1inch), like a quarter.
  • Microduino series uses the U-Shape 27-pin interface (UPin-27), the standard interface of Microduino, all Microduino modules and sensors can be easily stacked and extended, it is delivered ready to plug in.
  • With tiny shape and uniform interface, Microduino series dramatically decreases the size and cost of design prototype, remarkable improves usability and flexibility of Arduino-compatible boards, as well as user experience.

Microduino uses the same development environment as Arduino IDE, designers can use the Arduino IDE, Processing on Microduino for idea realization, prototype development and low volume production.

Microduino uses optiboot for bootloader, it takes less Flash than Arduino default engine and optimizes program uploading.

Currently, there are 4 different configurations for Microduino-Core modules:

Type Flash SRAM EEPROM Frequency Supply
Atmega328P@16M,5V 32K 2K 1K 16M 5.0V
ATmega328P@8M,3V3 32K 2K 1K 8M 3.3V
ATmega168PA@16M,5V 16K 1K 512 16M 5.0V
ATmega168PA@8M,3V3 16K 1K 512 8M 3.3V

Different configurations in frequency and supply voltage:

  • Clock frequency and supply voltage are paired, 8M module is supplied by 3.3V voltage, while 16M module is by 5.0V voltage.
  • A 16M with 5V Microduino-Core module is recommended for desktop equipments or designs; regarding mobile equipments or designs, a 8M with 3.3V module is suggested for low power and battery supply purposes.


Core vs Core+

  • Microduino also provides Microduino-Core+ module, aiming at high performance applications which require large SRAM/EEPROM/Flash and more I/O ports.
  • Both Microduino-Core and Microduino-Core+ use UPin-27 interface -- the standard module interface of Microduino series. The main difference between them is MCU chip: -Core module uses ATmega328P/ATmega168PA, as same as Arduino Uno; -Core+ module uses ATmega644PA/ATmega1284P, its performance is similar to Arduino Mega2560.
Microduino Chip Flash SRAM EEPROM Digital I/O Analog I/O PWM Hardware Serial
Core Atmega168PA 16K 1K 512 23 8 6 1
ATmega328P 32K 2K 1K 23 8 6 1
Core+ Atmega644PA 64K 4K 2K 32 8 6 2
ATmega1284P 128K 16K 4K 32 8 6 2
  • According above table, Core and Core+ are different in Flash, EEPROM and SRAM size, also, they supply different size of digital I/O and hardware serial ports, and there are 10 more digital I/O and 1 more hardware serial ports in Core+. Designers can select specific module regarding different application requirements on function, performance and power.
  • Both Core and Core+ use UPin-27 interface, Microduino program can be smoothly ported between them.

Features

  • Small, Stack, Strong
  • Open source hardware, using the same development environment as Arduino IDE
  • Microduino-Core can be burned with ISP, same as Arduino, easy "bootloader"
  • Using the U-Shape 27-pin interface (UPin-27), the standard interface of Microduino, all

Microduino modules and sensors can be easily stacked and extended through it

  • Delivered ready to plug in.
  • 2.54mm (0.1 inch) pin pitch, compatible to bread board and hole board

Specifications

  • Microcontroller: ATmega328P/ATmega168PA
  • Operating Voltage: 5V/3.3V
  • Input Voltage (limits): 6-20V
  • Digital I/O Pins: 14 (of which 6 provide PWM output with D3,D5,D6,D9,D10 and D11)
  • Analog Input Pins: 8 (2 more comparing to Arduino Uno)
  • DC Current per I/O Pin: 40 mA
  • DC Current: 50 mA
  • Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data.
  • External Interrupts: 2 and 3. These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value. See the attachInterrupt() function for details.
  • PWM: 3, 5, 6, 9, 10, and 11. Provide 8-bit PWM output with the analogWrite() function.
  • SPI: 10 (SS), 11 (MOSI), 12 (MISO), 13 (SCK). These pins support SPI communication using the SPI

library.

  • TWI: A4 or SDA pin and A5 or SCL pin. Support TWI communication using the Wire library.
  • AREF. Reference voltage for the analog inputs. Used with analogReference().
  • Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader
  • SRAM 2 KB (ATmega328P)
  • EEPROM 1 KB (ATmega328P)
  • Clock Speed 16MHz(5V) / 8Mhz(3.3V)
  • Currently, there are 4 different configurations for Microduino-Core modules:
Type Flash SRAM EEPROM Frequecy Supply
Atmega328P@16M,5V 32K 2K 1K 16M 5.0V
ATmega328P@8M,3V3 32K 2K 1K 8M 3.3V
ATmega168PA@16M,5V 16K 1K 512 16M 5.0V
ATmega168PA@8M,3V3 16K 1K 512 8M 3.3V
文件:Microduino-Core-Pinout1.png
Microduino-Core-Pinout
文件:Microduino-Core-Pinout2.png
Microduino-Core-Pinout
文件:Microduino-Core-Pinout3.png
Microduino-Core-Pinout
文件:Microduino-Core-Pinout.png
Microduino-Core-Pinout


download

Documents

文件:Microduino-Core-SCH.png
Microduino-Core Schematic


文件:Microduino-Core-PCB.png
Microduino-Core PCB


Development

  • Microduino Arduino IDE Configuration
    • 1. Install Arduino IDE: Microduino use the same IDE as Arduino, please download Arduino IDE from 【Arduino IDE official】 and install it in your disk. (if you already have it, just skip this step). Please check Arduino IDE details from 【Reference】 and 【Workshop】.
    • 2. Patch Microduino package: Please download Microduino package for Arduino IDE from 【download】, and unzip is to {Your Arduino Install Driectory}/hardware directory.
    • Microduino Arduino IDE Reference workshop: 【Arduino IDE Microduino Configuration】.
    • 3. Programming: To upload program to Microduino-Core/Core+ through Arduino IDE, designers are recommended to use Microduino-FT232R module.
    • 4. Enjoy your Microduino journey!
  • Burn Microduino BootLoader
    • Bootloader burning is necessary if designers want to update Microduino-Core/Core+ firmware by themselves, designers can leaverage Arduino Uno or another burned Microduino-Core/Core+ to make a new one.
    • Microduino bootloader workshop: 【Burn Bootloader to Microduino-Core/Core+ with an Arduino】.
    • Bootloader is specified for different Microduino-Core/Core+ configurations, correct one must be selected during burning.
    • Initial bootloader is designed for ATmegaX8 series optiboot, which occupies only 512 bytes flash.

Applications

  • room-Microduino
  • obdii-Microduino
  • pilot-Microduino
  • green-Microduino
  • music-Microduino

Buy

History

  • 2012/12/16: Published Microduino-Core patch for Arduino IDE
  • 2012/11/18: Optimized the first formal release, finalized Miroduino-Core configuration
  • 2012/11/06: Beta version.

Pictures

文件:Microduino-Core-F.JPG
Microduino-core Front


文件:Microduino-Core-B.JPG
Microduino-core Back


Microduino-core 3D model