Microduino-Bright LED

来自Microduino Wikipedia
1304410487@qq.com讨论 | 贡献2015年2月12日 (四) 08:57的版本 (Created page with "{{Language|Microduino-BRIGHT LED Sensor}} {| style="width: 800px;" |- | 400px|thumb|right| Microduino-BRIGHT LED Sensor Microduino-BR...")
(差异) ←上一版本 | 最后版本 (差异) | 下一版本→ (差异)
跳转至: 导航搜索
Language English
文件:Microduino-Bright LED-rect.jpg
Microduino-BRIGHT LED Sensor

Microduino-BRIGHT LED Sensor owns a size of 5mm*5mm.








Feature

  • Control the lightness of LED via PWM
  • Small size and easy installation

Specification

  • 5V operation voltage
  • Size: 20.32*20.32mm;
  • 1.27mm-pitch and 4pin interface

Document

Development

The operation voltage of Microduino-BRIGHT LED Sensor is 5V. It can generally be controlled by digital port drive or by PWM. Each LED owns current-limiting resistance, which can avoid burning due to high electricity current.


Application

  • Hardware needed: Microduino-Core, Microduino-USBTTL, USB cable and dupont line;
  • Stack all the modules and connect with dupont line: Connect VCC of BRIGHT LED to the 5V interface of Core, GND to GND, IN to D13. (You can refer to pin description picture above.)
  • Open Arduino IDE, select File→Examples→Basics→Blink example and choose the right board, then download after compiling.
  • You can see BRIGHT LED blink one time per second after the download.
  • As for PWM control, you can refer to: Lesson 6 --The Program PWM control of LED brightness --Breathing light

Purchase

History

Pictures

  • Front
文件:Microduino-BRIGHT LED Sensor-F.JPG
Microduino-Cube-Station Front
  • Back
文件:Microduino-BRIGHT LED Sensor -b.JPG
Microduino-Cube-Station Back