“Microduino-Amplifier”的版本间的差异

来自Microduino Wikipedia
跳转至: 导航搜索
Development
Pkj讨论 | 贡献
Feature
 
第13行: 第13行:
 
*Small, cheap, stackable and open
 
*Small, cheap, stackable and open
 
*Open hardware circuit design and Arduino compatible programming development environment;
 
*Open hardware circuit design and Arduino compatible programming development environment;
*Uniformed Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors in accord with Microduino interface standard;
+
*Uniform Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors in accord with Microduino interface standard;
 
*Easy to be integrated to pegboards with a 2.45-pitch female header connector interface.  
 
*Easy to be integrated to pegboards with a 2.45-pitch female header connector interface.  
  
第19行: 第19行:
 
|-
 
|-
 
|
 
|
 +
 
==Specifications==
 
==Specifications==
 
*Offer 2.2W output for 4Ω load;
 
*Offer 2.2W output for 4Ω load;

2014年8月22日 (五) 02:51的最新版本

Language English

Microduino-Amplifier is the double-channel audio power amplifier module.

Feature

  • 2.54 connector with good compatibility;
  • Power-on noise offset and uni-gain stable;
  • Small, cheap, stackable and open
  • Open hardware circuit design and Arduino compatible programming development environment;
  • Uniform Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors in accord with Microduino interface standard;
  • Easy to be integrated to pegboards with a 2.45-pitch female header connector interface.


Specifications

  • Offer 2.2W output for 4Ω load;
  • Operating Voltage:2.0-5.5V;
  • Externally controlled low-power shutdown mode with the typical shutdown current of 0.7uA.
文件:LM4863-Pinout-2.jpg
Microduino-LM4863-Pinout
文件:LM4863-Pinout-1.jpg
Microduino-LM4863-Pinout

Document

Eagle PCB 文件:Microduino-LM4863.zip

Main Component

Development

  • Make sure the current(5v) can reach 500ma. The FT232R debugging is not recommended since FT232R's output current is small.

Arduino library and supported package

How to use the library

  • The CS pin of Microduino-SD module needs to be changed from D4 in the original library to D7;
  • Since the original library can not support Microduino Core+ directly, we have modified this library to solve this problem;
  • TF card(2GB of memory and lower) in FAT format is recommended.


Low-power shutdown of external control

  • In many applications, the shutdown port's level conversion is finished by the controller, but it can also be achieved by a one-way blade switch;
    • Connect a pull-up resistor on the third pin of the second row pin female near the D13 pin, then disconnect the switch. This pin will be pulled low, so the Amplifier begin to work;
    • Turn on the switch,the pull-up resistor will pull up the voltage,making Microduino-LM4863 stop working.

Application

Program Download

The Audio experiment using Core and SD

  • Hardware:Microduino FT232R、Microduino Core、Microduino SD、Microduino LM4863;
  • Software:Arduino IDE(1.0 release upper)、Microduino provides test program(Arduino part)、SimpleSDAudio library、Audio file creation tools;
  • Put the downloaded library to the libraries folder of Arduino IDE installation;
  • Copy the "EXAMPLE.AFAM" in "examples" folder to memory card;
  • Start Arduino IDE,open the "BareMinimum" program, choose "Microduino Core (Atmega328P@16M,5V)"and download directly;
  • Then you can listen it!
    • If you want to play your own audio, just need to change the "EXAMPLE.AFM" to the name of the generated audio file.

The process of making an audio file

  • Convert any audio file into a. Wav format using a software "Format Factory";
  • Generate an audio file:
    • We need to use a SoX-based tool, and then choose the appropriate conversion process according to the operating frequency of the modules;
    • Decompress the tool,then enter“Arduino with 16 MHz”folder,put the audio file into this folder,and drag to "FullRate@16MHz_Stereo.bat" (16M full stereo) batch on;
    • then you can convert the file. A dialog box will pop up "Press any key to continue ...";
    • After that, you will find a new folder and the converted file is there.

Pictures

Microduino LM4863 Front


Microduino LM4863 Back