Lesson 31--Microduino 16*16 Lattice Character Static Display

来自Microduino Wikipedia
Pkj讨论 | 贡献2014年3月16日 (日) 07:22的版本 (Created page with "{{Language | 第三十一课--Microduino 16*16点阵汉字静态显示}} {| style="width: 800px;" |- | ==Objective== LM-2256 series of 16*16 lattice, its size is 40.46*40.46*5...")
(差异) ←上一版本 | 最后版本 (差异) | 下一版本→ (差异)
跳转至: 导航搜索
Language English

Objective

LM-2256 series of 16*16 lattice, its size is 40.46*40.46*5mm, each round LED light's size is 2.0mm. Using 4 74ls595 chips to control it, so you only need three pins to control 256 LEDs. Enough to show a Chinese character, rather than simple letters or numbers. This experiment doesn't use a simple jumper connection, instead welding circuit board, combines minroduino module and lattice, it's beautiful and small as a whole.

Equipment

Document

LM-2256 Series 16 *16 matrix displays:文件:.led 16 16.zip

Features

  • Smale, the size is 40.46*40.46*5mm;
  • Using 2mm round LED;
  • LED lattice screen on a black background, very beautiful;

Debug

Welding circuit

Step 1:Cut pegboard;

Step 2:Design the position of Microduino base plate, then Welding Microduino base plate;

Step 3:Fix the pegboard and lattice, and then plus studs for fixed;

LM-2256

Step 4:Welding control pin:

  • Pin connection:
LM-2256
  • Finished welding
LM-2256
LM-2256

Program

Step 1:Download test program, and then open it; Step 2:Compile it and then select the board to download, after download, you can see a Chinese character "Ya" (雅);

LM-2256

Step 3:Change the font; Note:Change the modulus method to:Determinant, yang code, reverse. After finished, download directly.

Detailed information, please refer to :http://www.microduino.cc/wiki/index.php?title=%E7%AC%AC%E4%BA%8C%E8%AF%BE--Microduino_OLED%E4%BD%BF%E7%94%A8/zh

LM-2256

Result

Through the test, it can display a Chinese character staticly, and each LED light's brightness is uniform, and beautiful.

Extension

In this experiment, we used Microduino-Core and Microduino Ft232R, thickness is a little big。If use the Microduino-32U4 (Instead Microduino-Core and Microduino Ft232R), the thickness will be decreased.

LM-2256

Issue need to pay attention

  • When welding microduino base plate, pay attention to pin. After welding, had better measure it using a multimeter, then power on.
  • Change the font, need to set modulus format properly.

Video

http://v.youku.com/v_show/id_XNjc2MzI1NTMy.html