Clock

来自Microduino Wikipedia
Pkj讨论 | 贡献2014年6月6日 (五) 08:42的版本 (Created page with "{| style="width: 800px;" |- | ==Objective== The course will show you how to use Processing to display a Microduino clock. ==Equipment== *'''Microduino-Core''' *'''Mic...")
(差异) ←上一版本 | 最后版本 (差异) | 下一版本→ (差异)
跳转至: 导航搜索

Objective

The course will show you how to use Processing to display a Microduino clock.

Equipment

  • Other Hardware Equipment
    • A USB cable

Schematic

Just stack the three Microduino modules needed together

Program

Referring to ProcessingColock

MicroduinoColock

Debugging

Step 1:Build the hardware environment on the basis of the schematic, as follows:

ProcessingColockConnectionDiagram.jpg


Step 2:Here the code needed:

The code of the two ends (Processing and Microduino)

Microduino:

//Just run the RTC module and transmit time data to the serial port

 void loop()
 {
   rtc.formatDate();
   rtc.formatTime();
   //send time data to port
   Serial.print(rtc.getHour());
   Serial.print(":");
   Serial.print(rtc.getMinute());
   Serial.print(":");
   Serial.println(rtc.getSecond());
 }

//Initialize time

 //inital time
 void vosettime()
 {
   //rtc.initClock();
   //day, weekday, month, century(1=1900, 0=2000), year(0-99)
   rtc.setDate(4, 1, 6, 0, 14);
   //hr, min, sec
   rtc.setTime(15, 28, 50);
 }

Processing:

//Define the first serial data after getting it, and cache it if there is a new line

 // List all the available serial ports in the output pane.
 // You will need to choose the port that the Wiring board is
 // connected to from this list. The first port in the list is
 // port #0 and the third port in the list is port #2.
 println(Serial.list());
 // Open the port that the Wiring board is connected to (in this case #0)
 // Make sure to open the port at the same speed Wiring is using (9600bps)
 port = new Serial(this, Serial.list()[0], 9600);


//Initialize the center point position of the clock as well as the length of the hour hand, minute hand and the second hand

 int radius = min(width, height)/2;
 secR = radius * 0.72;
 minR = radius * 0.60;
 hourR = radius * 0.50;
 clockDiameter = radius * 1.8;
 cx = width /2 ;
 cy = height /2 ;

//Draw the current value after getting the x-coordinate value of the mouse via serial output

 void update(int x) 
 {
   port.write(x);
   stroke(255);  
   line(mouseX, 0, mouseX, 160);   
   text (mouseX, mouseX, 180);
 }


//Receive the serial data and process time information

   //split data by ":"
   String time[]=val.split(":"); 
   //if some exception happend, initial time is 0 colock
   try {
     hour=Integer.parseInt(time[0]);
     minute=Integer.parseInt(time[1]);
     second=Integer.parseInt(time[2]);
   } 
   catch (NumberFormatException e) {
     hour=0;
     minute=0;
     second=0;
   }

//Draw a clock

   float s = map(second, 0, 60, 0, TWO_PI) - HALF_PI;
   float m = map(minute+norm(second, 0, 60), 0, 60, 0, TWO_PI)- HALF_PI;
   float h = map(hour+norm(minute, 0, 60), 0, 24, 0, TWO_PI * 2 ) - HALF_PI;
   //draw clock
   stroke(255, 250, 0);
   strokeWeight(1);
   line(cx, cy, cx + cos(s) * secR, cy + sin(s) * secR);
   strokeWeight(2);
   line(cx, cy, cx+ minR * cos(m), cy + minR * sin(m));
   strokeWeight(4);
   line(cx, cy, cx + hourR * cos(h), cy + hourR * sin(h));
   strokeWeight(2);
   stroke(255, 0, 0);
   for (int a = 0 ;a<360;a+=6) {
     float angle =  radians(a);
     float cx1 =  (secR+20) * cos(angle);
     float cy1 =  (secR+20) * sin(angle);
     point(cx + cx1, cy + cy1);
     if (a%30==0) {
       line(cx+cx1, cy+cy1, cx+cx1*0.98, cy+cy1*0.98);
       fill(255);
       int mark;
       if (a/30>9) {
         mark = a/30 -9;
       }
       else
       { 
         mark = a/30 +3;
       }
       text(mark, cx+cx1*1.05-5, cy+cy1*1.05+5);
     }
     fill(90, 155, 11);
     text(hour+":"+minute+":"+second, cx-25, cy+100);
     text("Microduino", cx-25, cy-100);
   }

Step 3:Download the code and get it complied successfully.

Step 4:Focus on Processing after the system goes well.

Result

A running clock will be displayed on the screen, just like this

ProcessingColockResult.jpg


Video