8*8 Single-color Lattice Control

来自Microduino Wikipedia
Pkj讨论 | 贡献2014年6月19日 (四) 03:29的版本 (Created page with "{| style="width: 800px;" |- | ==Objective== The course will show you how to use Processing to control 8*8 lattice. ==Equipment== *'''Microduino-Core''' *'''Microduino...")
(差异) ←上一版本 | 最后版本 (差异) | 下一版本→ (差异)
跳转至: 导航搜索

Objective

The course will show you how to use Processing to control 8*8 lattice.

Equipment

  • Other Hardware Equipment
    • A USB cable
    • A box of jumpers
    • A breadboard
    • A 8*8 lattice
    • Two 74HC595


Schematic

88LatticeSchematics.jpg

Program

Referring to ProcessingLattice

Debugging

Step 1:Build the hardware environment according to the schematic, as follows:

88LatticeConnectionDiagram.jpg


Step 2:Explain the code:

There will be the code of two ends (Processing and Microduino) needed in this course.

Microduino:

Using firmata’s StandardFirmata program.


Processing:

//Define the first serial port.

 arduino = new Arduino(this, Arduino.list()[0], 57600);

//Define the output pin in setup() as well as 64 LED objects

 arduino.pinMode(latchPin, Arduino.OUTPUT);
 for (int i=0;i<8;i++) {
   for (int j = 0; j < 8; j ++ ) { // Initialize each led and output pin using a for loop.
     leds[i][j] = new LED((i+1)*60, (j+1)*60, 50, 50, j+1+(i*10));
     ledStates[i][j]=false;
   }
 }


//Judge on which line or row the open fire of the 64 LED goes on or off.

 background(255);
 for (int i=0; i<8;i++) {
   for (int j = 0; j < 8; j ++ ) { // Run each LED using a for loop.
     leds[i][j].display();
     if (leds[i][j].button) {//switch led on/off
       ledStates[i][j]=true;
     }
     else {
       ledStates[i][j]=false;
     }
   }
 }

//Control and process the 74hc595 chip, map onto the 8*8 lattice.

 for (int i=0;i<8;i++) {
   arduino.digitalWrite(latchPin, 0);
   shiftOut(dataPin, clockPin, maskByteLines[0]); //mask(col)
   shiftOut(dataPin, clockPin, booleanArray2Byte(ledStates[i])); //row
   arduino.digitalWrite(latchPin, 1);
 }

Function Reference:

mousePressed();//Mouse clicked event processing

booleanArray2Byte();//Convert boolean array into byte value

shiftOut();//The 74hc595 chip’s shifOut binary handler function


Step 3:Get the code downloaded and compiled successfully.

Step 4:The 8*8 LED lattice will be displayed in Processing. Click any LED to see what happens.

Result

The LED lights go on and out correspondingly with the 8*8 lattice, just like this

88LatticeResult.jpg


Video