Applause Enthusiasm Detection

Language	English

Objective Here we’ll detect applause. The louder it gets, the brighter the light turns. When the brightness gets to the most, the buzzer will give an alarm. Principle Equipment Module Number Function Microduino-CoreUSB 1 Core board Microduino-Sensorhub 1 Sensor pinboard Microduino-Mic 1 Sound detection sensor Microduino-Lamp 1 led sensor Microduino-BUZZER 1 Buzzer sensor Microduino-BM 1 Batery management 文件:Applause heat.jpg 600px Hardware Buildup Setup 1：Connect CoreUSB to your PC, open program example, choose the right board fand download program via the serial port. 文件:Applause heat setup 1.jpg 600px Setup2：Connect MIC to the A0 pin of Sensorhub, buzzer to D6 and the led light to D4. 文件:Applause heat sensor.JPG 800px Setup6：Connect battery to BM. 文件:Applause heat bm.JPG 800px Software Debugging Build IDE and download program code. Applause_heat Code description Control pin description #define PIN 4 Adafruit_NeoPixel strip = Adafruit_NeoPixel(6, PIN, NEO_GRB + NEO_KHZ800); #define mic_pin A0 #define buzzer_pin 6 Sound pre-set value #define voice 400 If the sound is louder than the pre-set value, the lamp will get brighter and when it reaches to a certain value, the buzzer will go off. if (voice_data > voice) { num++; if (num > 255) { num = 255; buzzer(); } colorWipe(strip.Color(num, 0, 0)); //delay(10); Serial.println(num); time = millis(); } Result The louder the applause gets, the brighter the lamp becomes. When it reaches to the brightest, the buzzer will give an alarm. When the sound gets below the pre-set value after that, it will take three seconds and then turn off the light and the buzzer. (You can achieve a beautiful frame with LEGO.) Video