아두이노 IDE 드라이버 설치하기

来自Microduino Wikipedia
Md讨论 | 贡献2014年8月20日 (三) 14:09的版本 (Created page with "{| style="width: 800px;" |- | ==준비하기== *소프트웨어: 아두이노 통합 개발환경, 마이크로두이노 개발환경 설정패키지 : Microduino-hardw...")
(差异) ←上一版本 | 最后版本 (差异) | 下一版本→ (差异)
跳转至: 导航搜索

준비하기

  • 소프트웨어:
  아두이노 통합 개발환경, 마이크로두이노 개발환경 설정패키지 : Microduino-hardware.zip
  • 하드웨어:
  Microduino-USBTTL(FT232RL)보드, USB 케이블

설정절차

Mac 컴퓨터에 설치하기 : 文件:Mac microduino.pdf

Window 시스템에 설치하기 :

  • 아두이노 개발환경 다운로드 하기

http://arduino.cc/en/Main/Software

  • 특정 폴더에 다운받은 화일의 압축을 푼다.Uncompress the Arduino IDE package to a specific folder;
  • Connect the Microduino FT323R to PC with the MicUSB cable;
  • After the new hardware was recognized, then will search the driver in system. If con't find the driver, need install it manually.
  • Click the right button on "computer", then click "manager".
  • Then open the "Device Manager", you can see the uncognized hardward with a exclamation.
  • Click right button on un-recognized hardware, select update driver software. In the pop-up dialog, select search computer for driver software.


  • Then select the drivers directory in Aduirno IDE directory.

Note, if your computer reports that can't find the driver, need to be further positioning to the directory \drivers\FTDI USB Drivers

  • Click next, then install the driver.
  • After the driver installed successfully, you can see the COM port.