아두이노 IDE 드라이버 설치하기

준비하기 소프트웨어： 아두이노 통합 개발환경, 마이크로두이노 개발환경 설정패키지 : Microduino-hardware.zip 하드웨어: Microduino-USBTTL(FT232RL)보드, USB 케이블 설정절차 Mac 컴퓨터에 설치하기 : 文件:Mac microduino.pdf Window 시스템에 설치하기 : 아두이노 개발환경 다운로드 하기 http://arduino.cc/en/Main/Software 특정 폴더에 다운받은 화일의 압축을 푼다.Uncompress the Arduino IDE package to a specific folder; Connect the Microduino FT323R to PC with the MicUSB cable; After the new hardware was recognized, then will search the driver in system. If con't find the driver, need install it manually. Click the right button on "computer", then click "manager". 文件:Microduino-Start1.jpg Microduino Then open the "Device Manager", you can see the uncognized hardward with a exclamation. 文件:Microduino-Start2.jpg Microduino Click right button on un-recognized hardware, select update driver software. In the pop-up dialog, select search computer for driver software. 文件:Microduino-Start3.jpg Microduino Then select the drivers directory in Aduirno IDE directory. Note, if your computer reports that can't find the driver, need to be further positioning to the directory \drivers\FTDI USB Drivers 文件:Microduino-Start4.jpg Microduino Click next, then install the driver. 文件:Microduino-Start5.jpg Microduino 文件:Microduino-Start6.jpg Microduino After the driver installed successfully, you can see the COM port. 文件:Microduino-Start7.jpg Microduino