两个coreRF核心模块通信示例

两个coreRF核心模块通信示例 此示例给出了两个coreRF模块之间通信的方法，一个用来发射数据，一个用来接收数据。 代码 发射端程序: /* [head,2byte,0xAA 0xBB] [type,1byte,TYPE_NUM] [data,16byte] [body,1byte,getChecksum()] Example: AA BB C8 DC 05 DC 05 D0 07 EF 03 DC 05 DC 05 DC 05 DC 05 E3 */ #include <Microduino_Protocol.h> ProtocolZig protocolA(16); //数据长度为16个字节 uint16_t sendData[8] = {1500, 1500, 1500, 1500, 1000, 1000, 1000, 1000}; uint32_t sendTime; void setup() { Serial.begin(9600); protocolA.begin(11); //括号内参数为CoreRF通道号 sendTime = millis(); } void loop() { if(millis() - sendTime > 1000) { sendTime = millis(); protocolA.write(0x01, (uint8_t *)sendData, 16); Serial.println("protocolA send !"); } delay(10); } 接收端程序: /* [head,2byte,0xAA 0xBB] [type,1byte,TYPE_NUM] [data,16byte] [body,1byte,getChecksum()] Example: AA BB C8 DC 05 DC 05 D0 07 EF 03 DC 05 DC 05 DC 05 DC 05 E3 */ #include <Microduino_Protocol.h> ProtocolZig protocolA(16); //数据长度为16个字节 uint16_t recData[8]; uint8_t recCmd; void setup() { Serial.begin(9600); protocolA.begin(11); //括号内参数为CoreRF通道号 } void loop() { if(protocolA.available()) { protocolA.readWords(&recCmd, recData, 8); Serial.println("protocolB Received !"); Serial.print("recCmd: "); Serial.print(recCmd); Serial.print(" Data:"); for(uint8_t i=0; i<8; i++) { Serial.print(" "); Serial.print(recData[i]); } Serial.println(); } delay(10); }

返回Protocol_Reference界面