Microduino-nRF24

来自Microduino Wikipedia
Makermodule讨论 | 贡献2013年12月15日 (日) 09:47的版本 (Created page with "{| style="width: 800px;" |- | 400px|thumb|right|Microduino-nRF24 '''Microduino-nRF24''' uses the newest 2.4GHz transceiver nRF24L01 fro...")
(差异) ←上一版本 | 最后版本 (差异) | 下一版本→ (差异)
跳转至: 导航搜索

Microduino-nRF24 uses the newest 2.4GHz transceiver nRF24L01 from Nordic Semiconductor. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401A and add some extra pipelines, buffers, and an auto-retransmit feature.

Designers can use Microduino-nRF24 in project without any wireless design , and just need to stack it with Microduino-Core or Microduino-Core+ through UPin-27, the standard Microduino interface will attach nRF24 and MCU with SPI bus, on transferring data.

Microduino-nRF24 works in the 1.9 to 3.6v voltage, the on-chip DC-DC regulator will automatically step down supply voltage to proper level.

Note: We now populate these boards with the nRF24L01+. The '+' version of the IC has improved range, sensitivity, and data rates. The command set is backward compatible with the original nRF24L01.


Features

  • Worldwide license-free 2.4GHz ISM band operation
  • Using the U-Shape 27-pin interface (UPin-27), the standard interface of Microduino
  • Delivered ready to plug in.
  • 2.54mm (0.1 inch) pin pitch, compatible to bread board and hole board


Specifications

  • Auto Acknowledge
  • Auto Re-Transmit
  • 100m Range at 250kbps
  • 250kbps to 2Mbit Data Rate
  • 32 Byte separate TX and RX FIFOs
  • Software selectable channel from 2400MHz to 2525MHz (125 Selectable channels)
  • 1Mbps and 2Mbps on-air data-rate
  • Enhanced ShockBurst? hardware protocol accelerator
文件:Micrduino-nRF24-1.png
Microduino-nRF24 Spec


文件:Micrduino-nRF24-2.png
Microduino-nRF24 Spec



Documents

文件:Microduino-nRF24-SCH.png
Microduino-nRF24 Schematic


文件:Microduino-nRF24-PCB.png
Microduino-nRF24 PCB


Development

Buy

History

Pictures