GestureSensor.readRedLight()
GestureSensor.readRedLight()
描述 读取颜色的红色通道亮度 参数 返回值 红色通道亮度 示例 #include <Microduino_Gesture.h>
// Global Variables
Gesture gestureSensor;
void setup() {
// Initialize Serial port
Serial.begin(9600);
// Initialize Gesture (configure I2C and initial values)
if ( gestureSensor.begin() ) {
Serial.println(F("Gesture initialization complete"));
} else {
Serial.println(F("Something went wrong during Gesture init!"));
}
// Start running the Gesture light sensor (no interrupts)
if ( gestureSensor.enableLightSensor(false) ) {
Serial.println(F("Light sensor is now running"));
} else {
Serial.println(F("Something went wrong during light sensor init!"));
}
// Wait for initialization and calibration to finish
delay(500);
}
void loop() {
// Read the light levels (red)
Serial.print(" Red: ");
Serial.print(gestureSensor.readRedLight());
// Wait 1 second before next reading
delay(1000);
}
其他 |