Microduino-【BT】
|
Microduino-【BT】 module is a plug-in device that supports Bluetooth 4.0 low energy standard. All protocol stacks required for Bluetooth low energy communication are built in, including various healthcare profiles. Configuration command set is provided via UART interface and it enables the module to be easily controlled by 8-bit or 16-bit MCUs widely used in small embedded devices, such as Microduino-Core and Microduino-Core+. Profile framework enables users to select and configure Bluetooth low energy profiles. It also supports 128-bit UUID used for custom profiles and it allows users to use this module for various applications. Microduino-【BT】is integrated antenna, system clock, sleep clock, and board-to-board connector. Microduino-【BT】 also supports Bluetooth 2.1 standard for an alternative, designers can select proper one according to requirements and cost. |
Features
|
Specifications
|
Documents
|
Development
#include <SoftwareSerial.h>
SoftwareSerial mySerial(9, 10); //RX,TX
String tmp;
void setup() {
Serial.begin(9600);
mySerial.begin(9600);
};
void loop() {
while (mySerial.available() > 0) {
tmp += char(mySerial.read());
delay(2);
}
if(tmp.length() > 0) {
Serial.println(tmp);
tmp = "";
}
if (Serial.available()) {
mySerial.write(Serial.read());
}
}
//core+ D2-RX,D3-TX
void setup()
{
Serial1.begin(9600);
}
void loop()
{
Serial1.println("AT");
if (Serial1.available())
{
char c = Serial1.read();
Serial1.println(c);
}
delay(1000);
}
|
Buy
|
History |
Pictures文件:Microduino-【BT】-T.jpg Microduino BT 4.0 Front 文件:Microduino-【BT】-B.jpg Microduino BT 4.0 Back
|
