Wifi mode

WiFi网络广播播放 此示例为MicroAI的网络广播示例。 所需硬件 mCookie-Core+ MBattery+ MicroAI MCookie-Hub/zh 耳机 1.27mm 4P传感器线 Micro USB线 电路搭建 将Battery、Core+、hub堆叠在一起，通过MicroUSB数据线接入电脑，使用传感器线连接MicroAI的UART(串口)。将耳机根据模块上的耳机标志插入，并下载如下程序至Core+ 代码 发射端程序: #include <Microduino_Key.h> #include <Microduino_Ai.h> #define WIFI_SSID "SSID" //路由器名称 #define WIFI_PWD "PW" //路由器密码 #define WEB_NUM 4 const char* webRadioUrl[WEB_NUM] = { "https://http.qingting.fm/386.mp3", "https://http.qingting.fm/387.mp3", "https://http.qingting.fm/388.mp3", "https://http.qingting.fm/389.mp3", }; static uint8_t webRadioIndex = 0xFF; DigitalKey touch1(D4); DigitalKey touch2(D6); MicroAi mAi(&Serial1); char strBuf[64] = {0}; void setup() { Serial.begin(115200); touch1.begin(INPUT_PULLUP); touch2.begin(INPUT_PULLUP); Serial.print("MicroAi set mode: WIFI."); Serial.println("start initiation. "); if(mAi.begin(MODE_WIFI)){ Serial.println("init OK!"); }else{ Serial.println("init failed!"); while(1); } if(mAi.setWifi(WIFI_SSID, WIFI_PWD)){ Serial.println("set wifi ssid and password OK!"); }else{ Serial.println("set wifi ssid and password failed!"); while(1); } Serial.print("wifi connecting"); while(mAi.getRssi()==0){ Serial.print("."); delay(1000); } Serial.println("\r\nwifi connected."); delay(1000); } void loop() { if(touch1.readEvent() == SHORT_PRESS) { if(webRadioIndex < WEB_NUM-1) webRadioIndex++; else webRadioIndex = 0; mAi.playFile(webRadioUrl[webRadioIndex]); } if(touch2.readEvent() == SHORT_PRESS) { delay(500); Serial.print("AT start Rest: "); if(mAi.startRest()){ Serial.println("OK!"); int32_t code = mAi.waitResult(strBuf); if(code){ Serial.print("rest code: "); Serial.print(code); Serial.print(", result: "); Serial.println(strBuf); }else{ Serial.println("rest none "); } }else{ Serial.println("Failed!"); } } delay(50); } 运行结果 观察串口，显示Set name OK名称设置成功。

返回MicroAI Reference界面