Arduino IDE Driver Install

Equipment Software： Microduino software develop environment Arduino IDE, Microduino IDE configure pagckage; Hardware: Microduino FT232R、USB cable； Congfigure procedure Download Arduino IDE http://arduino.cc/en/Main/Software Uncompress the Arduino IDE package to a specific folder; Connect the Microduino FT323R to PC with the MicUSB cable; After the new hardware was recognized, then will search the deriver in system. If con't find the deriver, need install it manually. Click the right button on "computer", then click "manager". 文件:Microduino-Start1.jpg Microduino Then open the "Device Manager", you can see the uncognized hardward with a exclamation. 文件:Microduino-Start2.jpg Microduino Click right button on un-recognized hardware, select update driver software. In the pop-up dialog, select search computer for driver software. 文件:Microduino-Start3.jpg Microduino Then select the derivers directory in Aduirno IDE directory. Note, if your computer reports that can't find the deriver, need to be further positioning to the directory \drivers\FTDI USB Drivers 文件:Microduino-Start4.jpg Microduino Click next, then install the deriver. 文件:Microduino-Start5.jpg Microduino 文件:Microduino-Start6.jpg Microduino After the deriver installed successfully, you can see the COM port. 文件:Microduino-Start7.jpg Microduino