Setup Guide on Mac OS X

Equipment Software： Microduino software development environment Arduino IDE, Microduino IDE configuration package; Hardware: Microduino FT232R、Micro-USB cable； Congfigure procedure Download Arduino IDE on http://arduino.cc/en/Main/Software 文件:01 arduino IDE mac.png Arduino IDE for Mac Uncompress the Arduino IDE package to Applications folder; Download the USB driver on http://www.ftdichip.com/Drivers/VCP.htm 文件:02 FTDI drivers mac.png USB driver for Mac Install the USB Driver. Although the package name says FTDIUSBSerialDriver_10_4_10_5_10_6_10_7, it works perfect up to MAC OS X 10.9.3 DON'T PANIC 文件:Select Driver.png Select Driver Right click (or click with two fingers) the Arduino app in Applications folder, select the Show Package Contents Show Package Contents Download and uncompress the Microduino hardware package Media:Microduino-hardware.zip Place the Microduino folder into /Applications/Arduino.app/Contents/Resources/Java/hardware Place of hardware folder Connect the Microduino FT323R to your Mac computer with the Micro-USB cable; Open the Arduino app, Click the Tools menu, you will see Microduino family under Board menu. Microduino boards And something like /dev/tty.usbserial-XXXXXXXX 文件:03 Serial Port mac.png Serial Port Select the correct board model and serial port, you can now enjoy the limitless possibility Microduino brings to you. One of our dear community members created a PDF document about this procedure, you can take that as a reference: 文件:Mac microduino.pdf Setup Guide on Mac OS X