Equipment
Microduino software develop environment Arduino IDE, Microduino IDE configure pagckage;
Microduino FT232R、Micro-USB cable；
Congfigure procedure
http://arduino.cc/en/Main/Software
- Uncompress the Arduino IDE package to Applications folder;
- Download and install the USB driver on
http://www.ftdichip.com/Drivers/VCP.htm
- Right click (or click with two fingers) the Arduino app in Applications folder, select the ""Show Package Contents""
- Download and uncompress the Microduino hardware package
文件:Microduino-hardware.zip
- Place the Microduino folder into "/Applications/Arduino.app/Contents/Resources/Java/hardware"
- Connect the Microduino FT323R to your Mac computer with the Micro-USB cable;
- Open the Arduino app, Click the ""Tools"" menu, you will see Microduino family under "Board" menu.
- And something like "/dev/tty.usbserial-XXXXXXXX"
- Select the correct board model and serial port, you can now enjoy the limitless possibility Microduino brings to you.
One of our dear community members created a PDF document about this procedure, you can take that as a reference:
| 
