“Microduino Enc Wired network experiment -302KIT”的版本间的差异

来自Microduino Wikipedia
跳转至： 导航、 搜索
（→‎Outline）
Pkj（讨论 | 贡献）
（→‎Bill of Materials）
第22行： 第22行：
 
|Module||Number||Function
 
|Module||Number||Function
 
|-
 
|-
−
|Microduino-Core(Microduino Core+)||1||Slave, receive control signal
+
|Microduino-Core(Microduino Core+)||1||Served as the slave machine,receiving and controlling signal
 
|-
 
|-
−
|Microduino FT232R ||1||Download program
+
|Microduino FT232R ||1||For program download
 
|-
 
|-
−
|Microduino Enc(Microduino Rj45)||2||Wireless communication  
+
|Microduino Enc(Microduino Rj45)||2||For wireless communication
 
|}
 
|}
 
*Other equipment：
 
*Other equipment：
第35行： 第35行：
 
|Network cable||one
 
|Network cable||one
 
|-
 
|-
−
|micro usb data cable||one
+
|micro USB cable||one
 
|-
 
|-
 
|LED||Four
 
|LED||Four
第46行： 第46行：
 
|-
 
|-
 
|
 
|
 +
 
==Document==
 
==Document==
  

2014年8月22日 (五) 07:45的版本

Language English

Outline

Project: Microduino-Enc Wired Networking Experiment

Objective：Enable Microduihno-Core to connect with the network via Microduino-Enc and Microduino-RJ45, control four LED lights inside the LAN and achieve network control.

Difficulty：Elementary

Time-consuming：One hour

Maker：Microduino Studio-YLB

Bill of Materials

  • Microduino equipment：
Module Number Function
Microduino-Core(Microduino Core+) 1 Served as the slave machine,receiving and controlling signal
Microduino FT232R 1 For program download
Microduino Enc(Microduino Rj45) 2 For wireless communication
  • Other equipment：
Router one
Network cable one
micro USB cable one
LED Four
Bread board one
Breadboard jumper one box
文件:302KIT-module1.jpg
302KIT-module

Document

Debugging

Step 1：Set up router network

Power on router, and connect the PC to network.

Step 2：Set up hardware

Install all Microduino module, use the extension board Microduino Duo-V for easy debugging.

文件:302KIT-module2.jpg
302KIT-module
文件:302KIT-system.jpg
302KIT-system

Step 3：Downlaod program

Start Arduino IED, open the Microduino example program, board type choose "Microduino Core (Atmega328P@16M,5V)", download directly.

Step 4：Connect the network cable

Connect the microduino RJ45 to LAN port of router.

Step 5：Control the LED in loacal network

Open a new web page, enter into the address "myip". Microduiono networking success can enter the control interface, or can not be opened.

Myip

Result

Connect the Microduino core to network, control the LED by the button on web page. Press button, LED light, then press again, LED off.

Note

  • Microduino Enc must be used with Microduino RJ45 together.
  • Need configure the MAC address and ip address in local network.

Video

http://v.youku.com/v_show/id_XNjY1Njg5Nzcy.html

取自“http:///https//wiki.microduino.cn/index.php?title=Microduino_Enc_Wired_network_experiment_-302KIT&oldid=3856”