“Sensor-Gen&RGB/zh”的版本间的差异
第22行: | 第22行: | ||
| '''接口'''||1.27mm间距的4Pin座 | | '''接口'''||1.27mm间距的4Pin座 | ||
|- | |- | ||
− | | '''通信协议'''||IIC | + | | '''通信协议'''||IIC(地址0x39) |
|- | |- | ||
| '''传感器'''||APDS9960 | | '''传感器'''||APDS9960 |
2018年5月15日 (二) 06:36的版本
| |
|
技术规格
引脚
编程手册 手势识别
void setup() {
// put your setup code here, to run once:
Serial.begin(9600);
}
void loop() {
if ( gestureSensor.isGestureAvailable() ) {
switch ( gestureSensor.readGesture() ) {
case DIR_UP:
Serial.println("UP");
break;
case DIR_DOWN:
Serial.println("DOWN");
break;
case DIR_LEFT:
Serial.println("LEFT");
break;
case DIR_RIGHT:
Serial.println("RIGHT");
break;
case DIR_NEAR:
Serial.println("NEAR");
break;
case DIR_FAR:
Serial.println("FAR");
break;
default:
Serial.println("NONE");
}
}
}
颜色识别
void setup() {
// put your setup code here, to run once:
Serial.begin(9600);
}
void loop() {
// Read the light levels (ambient, red, green, blue)
Serial.print("Ambient: ");
Serial.print(gestureSensor.readAmbientLight());
Serial.print(" Red: ");
Serial.print(gestureSensor.readRedLight());
Serial.print(" Green: ");
Serial.print(gestureSensor.readGreenLight());
Serial.print(" Blue: ");
Serial.println(gestureSensor.readBlueLight());
// Wait 1 second before next reading
delay(1000);
}
文档
注意事项
示例教程
Q&A
历史
图库 |