Setup Guide on Mac OS X

Equipment Software： Microduino software develop environment Arduino IDE, Microduino IDE configure pagckage; Hardware: Microduino FT232R、Micro-USB cable； Congfigure procedure Download Arduino IDE http://arduino.cc/en/Main/Software 文件:01 arduino IDE mac.png Arduino IDE for Mac Uncompress the Arduino IDE package to Applications folder; Connect the Microduino FT323R to PC with the Micro-USB cable; After the new hardware was recognized, then will search the driver in system. If con't find the driver, need install it manually. Click the right button on "computer", then click "manager". 文件:Microduino-Start1.jpg Microduino Then open the "Device Manager", you can see the uncognized hardward with a exclamation. 文件:Microduino-Start2.jpg Microduino Click right button on un-recognized hardware, select update driver software. In the pop-up dialog, select search computer for driver software. 文件:Microduino-Start3.jpg Microduino Then select the drivers directory in Aduirno IDE directory. Note, if your computer reports that can't find the driver, need to be further positioning to the directory \drivers\FTDI USB Drivers 文件:Microduino-Start4.jpg Microduino Click next, then install the driver. 文件:Microduino-Start5.jpg Microduino 文件:Microduino-Start6.jpg Microduino After the driver installed successfully, you can see the COM port. 文件:Microduino-Start7.jpg Microduino Please refer to: 文件:Mac microduino.pdf Setup Guide on Mac OS X