“Microduino-Cube-S1”的版本间的差异

来自Microduino Wikipedia
跳转至： 导航、 搜索
（Created page with "Microduino-Cube-S1 {| style="width: 800px;" |- | 400px|thumb|right|Microduino-Cube-S1 ==特色== *Pin compatible with Arduino uno;； *2.54 pit..."）
 
Pkj（讨论 | 贡献）
（→‎Specification）
第21行： 第21行：
 
**OLED fixed base；
 
**OLED fixed base；
 
**Two serial ports, RX0、TX0(Serial) and D2、D3(Serial1)；
 
**Two serial ports, RX0、TX0(Serial) and D2、D3(Serial1)；
−
**Tw IIC interfaces；
+
**Two IIC interfaces；
−
****Two analogy button interfaces, and connect to A7；
+
***Two analogy button interfaces, and connect to A7；
 
**Sensor interface can be combined by jumper, The player can make the connection by yoursefl, as follows：
 
**Sensor interface can be combined by jumper, The player can make the connection by yoursefl, as follows：
 
***PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND.
 
***PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND.

2014年3月6日 (四) 03:33的版本

Microduino-Cube-S1

Microduino-Cube-S1

特色

  • Pin compatible with Arduino uno;；
  • 2.54 pitch board is the base for Microduino module, the same name pin are connected to each other on board, easy to debug.
  • Define unified interface Microduino specification and contain rich peripheral modules. Set up the quick connection with other Microduino modules and sensors easily and flexibly;
  • Onboard analog buttons, extended interface；

Specification

  • Electrical specifications
    • MicroUSB power supply；
    • 3.3V regular；
    • Select the 5V or 3.3V power via PWR jumper, default is 3.3V；
    • Onboard power supply (5V、PWR) indicator；
  • Extended pin
    • Onboard reset button；
    • OLED fixed base；
    • Two serial ports, RX0、TX0(Serial) and D2、D3(Serial1)；
    • Two IIC interfaces；
      • Two analogy button interfaces, and connect to A7；
    • Sensor interface can be combined by jumper, The player can make the connection by yoursefl, as follows：
      • PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND.
文件:Microduino-Cube-S1-Pinout1.jpg
Microduino-Cube-S1
文件:Microduino-Cube-S1-Pinout2.jpg
Microduino-Cube-S1-Pinout
文件:Microduino-Cube-S1-Pinout3.jpg
Microduino-Cube-S1-Pinout

Document

Eagle PCB local downlaod Main components：

Development

It can be used with other Microduino modules, sensor to achieve specific functions.

Microduino-Cube-S1

Application

  • You can download the test example, and combine OLED to test two analogy of Microduino-Cube-S1, test program Microduino-Cube-S1-Text.zip
  • Prepared hardware：Microduino FT232R, Microduino Core, Microduino-Cube-S1, Microduino OLED；
  • Prepared software：Microduino example program (Arduino part), Arduino IDE(1.0 release and upper)；
  • Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", download directly;
  • After download, OLED displays "No button is pressed ",
    • Press the left button, OLED displays "Press the left button" which means the left button was pressed；
    • Press the right button, OLED displays "Press the rignt button" which means the right button was pressed；
    • If no button was pressed, OLED displays "No button is pressed ", the same state with initial state.


Bug

History

Picture

Front

Microduino-Cube-S1 Front

Back

Microduino-Cube-S1 Back

Video

取自“http:///https//wiki.microduino.cn/index.php?title=Microduino-Cube-S1&oldid=1347”