“Arduino IDE Driver Install”的版本间的差异

来自Microduino Wikipedia
跳转至: 导航搜索
Pkj讨论 | 贡献
(Created page with "{| style="width: 800px;" |- | ==Equipment== *Software: Microduino software develop environment Arduino IDE, Microduino IDE configure pagckage; *Hardware: Microduino FT232R...")
(没有差异)

2014年3月3日 (一) 02:19的版本

Equipment

  • Software:

Microduino software develop environment Arduino IDE, Microduino IDE configure pagckage;

  • Hardware:

Microduino FT232R、USB cable;

Congfigure procedure

  • Download Arduino IDE

http://arduino.cc/en/Main/Software

  • Uncompress the Arduino IDE package to a specific folder;
  • Connect the Microduino FT323R to PC with the MicUSB cable;
  • After the new hardware was recognized, then will search the deriver in system. If con't find the deriver, need install it manually.
  • Click the right button on "computer", then click "manager".
  • Then open the "Device Manager", you can see the uncognized hardward with a exclamation.
  • Click right button on un-recognized hardware, select update driver software. In the pop-up dialog, select search computer for driver software.


  • Then select the derivers directory in Aduirno IDE directory.

Note, if your computer reports that can't find the deriver, need to be further positioning to the directory \drivers\FTDI USB Drivers

  • Click next, then install the deriver.
  • After the deriver installed successfully, you can see the COM port.