Microduino GPS recorder-306KIT

Outline Project：Microduino GPS Recorder Objective：Use the Microduino GPS module to get the geographic Information and store into Microduino SD card. Difficulty：Elementary Time-consuming：2 hours Maker：Microduino Studio-YLB

Bill of Materials Microduino module：（MICRODUINO 203KIT） Module Number Function Microduino-Core+ 1 Core module Microduino-FT232R 1 Download program Microduino-NEO-6M 1 WiFi module Microduino-SD 1 Store information Microduino-OLED 1 Display information

文件:GPS-module.jpg 306KIT picture

Document

Debug Step 1：Set up hardware Stack all the modules, and put the GPS antenna to outside, or may not receive the signal.

文件:306KIT-1.jpg 306KIT 文件:306KIT-2.jpg 306KIT

Step 2：Download program If use the default jumper (RX0、TX1), need unplug the Microduino NEO-6M when download program； Step 3：Test Find an open area to test, can't in the room, because no signal is received. The current status of the module can be judged by the PPS indicator: lighting, indicates that the module has started to work, but hasn't achieved position informaton. Flashing (100ms off, 900ms bright), which means that the module has been successful positioning.

Result After get the position information, the parameters can be seen, and these data can be recorded into the memory card. Walking speed Latitude and longitude Signal strength The number of satellite Altitude

Note Before download the program, please make sure the jumper connection firstly，detailed information refer to：http://wiki.microduino.net/index.php?title=Microduino-NEO-6M Debugging need in the open area. Video http://v.youku.com/v_show/id_XNjY1NzE3NDQ0.html