Microduino-Cube-V1

Language	English

Microduino-Cube-V1 Features Pin compatible with Arduino uno; Two UPin-27 standard interface bases connected with the corresponding pins； Uniformed Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard; Two bases are arranged longitudinally with pins interconnected on the board, making it possible to reduce the stacking height; Onboard analog button and sensor interface; Specifications Electrical specification MicroUSB power supply； 3.3V constant voltage； Select the 5V or 3.3V power via PWR jumper.(The default voltage is 3.3V)； Onboard power supply indicator(5V and PWR)； Extension Onboard reset button； Fixed OLED base； Two serial ports including (RX0,TX0)and (D2,D3)； Two IIC interfaces； Two analog button interfaces connected to A7； Seven analog buttons with two on the board connected to A6 and five on the stacking board connected to the interface of the base with Dupont lines； Below are two groups of sensor interfaces which can be selected and combined through jumpers. Users can choose different jumper connection as they like: PWR，GND，A3 or PWR，GND，A6； PWR，D5，GND or D4，D5，GND。 文件:Microduino-Cube-V1-Pinout1.jpg Microduino-Cube-V1-Pinout 文件:Microduino-Cube-V1-Pinout2.jpg Microduino-Cube-V1-Pinout 文件:Microduino-Cube-V1-Pinout3.jpg Microduino-Cube-V1-Pinout Components Base board：The board with two UPIN-27 standard interfaces; Overlay board: The fixed board of five analog buttons and an OLED; 文件:Microduino-Cube--Pinout1-Pinout4.jpg Microduino-Cube-S1 Document Eagle PCB : 文件:Microduino-Cube-V1.zip Main components： 3.3V Voltage Stablizing Chip LP2985： 文件:LP2985.pdf Development It can be used with other Microduino modules, sensor to achieve specific functions. Application You can download the test example, and combine OLED to test two analogy of Microduino-Cube-V1, test program Microduino-Cube-V1-Text.zip Prepared hardware：Microduino FT232R, Microduino Core, Microduino-Cube-V1, Microduino OLED； Prepared software：Microduino example program (Arduino part), Arduino IDE(1.0 release and upper)； Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", download directly; After the download is completed, OLED displays similar patterns with analogy keyboard. Press each button on floor and roof analog buttons can simulate the corresponding position's button. Buy History Picture Front Microduino-Cube-V1 Front Back Microduino-Cube-V1 Back Video