“Microduino-Cube-S1”的版本间的差异

来自Microduino Wikipedia
跳转至： 导航、 搜索
（→‎Features）
Pkj（讨论 | 贡献）
（→‎Specification）
第10行： 第10行：
  
 
==Specification==
 
==Specification==
−
*Electrical specifications
+
*Electrical specification
 
**MicroUSB power supply；
 
**MicroUSB power supply；
−
**3.3V regular；
+
**3.3V constant voltage；
−
**Select the 5V or 3.3V power via PWR jumper, default is 3.3V；
+
**Select the 5V or 3.3V power via PWR jumper(The default voltage is 3.3V)；
−
**Onboard power supply (5V、PWR) indicator；
+
**Onboard power supply indicator(5V and PWR) ；
  
−
*Extended pin
+
*Extension
 
**Onboard reset button；
 
**Onboard reset button；
−
**OLED fixed base；
+
**The fixed OLED base；
−
**Two serial ports, RX0、TX0(Serial) and D2、D3(Serial1)；
+
**Two serial ports including (RX0,TX0)and (D2,D3)；
 
**Two IIC interfaces；
 
**Two IIC interfaces；
−
***Two analogy button interfaces, and connect to A7；
+
***Two analog button interfaces connected to A7；
−
**Sensor interface can be combined by jumper, The player can make the connection by yoursefl, as follows：
+
**The sensor interface can be selected and combined through jumpers：
−
***PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND.
+
***PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND (Users can make the connection as they like).
  
 
[[file:Microduino-Cube-S1-Pinout1.jpg|800px|thumb|center|Microduino-Cube-S1]]
 
[[file:Microduino-Cube-S1-Pinout1.jpg|800px|thumb|center|Microduino-Cube-S1]]

2014年8月15日 (五) 06:55的版本

Language English
Microduino-Cube-S1

Features

  • Compatible with the pin of Arduino Uno;
  • Uniformed Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard;
  • Onboard analog button and sensor interface;

Specification

  • Electrical specification
    • MicroUSB power supply；
    • 3.3V constant voltage；
    • Select the 5V or 3.3V power via PWR jumper(The default voltage is 3.3V)；
    • Onboard power supply indicator(5V and PWR) ；
  • Extension
    • Onboard reset button；
    • The fixed OLED base；
    • Two serial ports including (RX0,TX0)and (D2,D3)；
    • Two IIC interfaces；
      • Two analog button interfaces connected to A7；
    • The sensor interface can be selected and combined through jumpers：
      • PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND (Users can make the connection as they like).
文件:Microduino-Cube-S1-Pinout1.jpg
Microduino-Cube-S1
文件:Microduino-Cube-S1-Pinout2.jpg
Microduino-Cube-S1-Pinout
文件:Microduino-Cube-S1-Pinout3.jpg
Microduino-Cube-S1-Pinout

Document

Eagle PCB local downlaod Main components：

Development

It can be used with other Microduino modules, sensor to achieve specific functions.

Microduino-Cube-S1

Application

  • You can download the test example, and combine OLED to test two analogy of Microduino-Cube-S1, test program：

https://github.com/Microduino/Microduino_Tutorials/commit/b0e0fe74269ee0f6a886d8fa8db497ec57cc4073

  • Prepared hardware：Microduino FT232R, Microduino Core, Microduino-Cube-S1, Microduino OLED；
  • Prepared software：Microduino example program (Arduino part), Arduino IDE(1.0 release and upper)；
  • Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", download directly;
  • After download, OLED displays "No button is pressed ",
    • Press the left button, OLED displays "Press the left button" which means the left button was pressed；
    • Press the right button, OLED displays "Press the rignt button" which means the right button was pressed；
    • If no button was pressed, OLED displays "No button is pressed ", the same state with initial state.

Bug

History

Picture

Front

Microduino-Cube-S1 Front

Back

Microduino-Cube-S1 Back

Video

取自“http:///https//wiki.microduino.cn/index.php?title=Microduino-Cube-S1&oldid=3679”