“Microduino-OLED”的版本间的差异

来自Microduino Wikipedia
跳转至： 导航、 搜索
（→‎Specifications）
第4行： 第4行：
 
[[file:Microduino-OLED-rect.jpg|400px|thumb|right|Microduino-OLED]]
 
[[file:Microduino-OLED-rect.jpg|400px|thumb|right|Microduino-OLED]]
  
−
'''Microduino-Oled 12864''' is based SSD1306 0.96 inch 12864 OLED display module. Using the I2C interface, 3.3V power supply.  
+
'''Microduino-Oled 12864''' is based on SSD1306 0.96 inch 12864 OLED display module. Using the I2C interface, 3.3V power supply.  
  
  
第14行： 第14行：
 
*Active light, no backlight, large-angle range;
 
*Active light, no backlight, large-angle range;
 
*Low driving voltage, low power consumption;
 
*Low driving voltage, low power consumption;
−
*I2C mode of communication, saving IO port, widely used;
+
*I2C communication, saving IO interface, widely used;
−
*Small, cheap, open source;
+
*Small, cheap, opened module;
−
*Open source hardware circuit design, compatible with the Arduino IDE development environment for programming process;
+
*Open source hardware circuit design, compatible with the Arduino IDE development environment for programming;
−
*Microduino unified interface specification, and rich peripheral modules can be easily and flexibly with other eligible Microduino interface specification modules, sensors for quick connection and expansion;
+
*Defines unified interface Microduino specification and contain rich peripheral modules. Set up the quick connection with other Microduino modules and sensors easily and flexibly.
 +
;
  
  
第27行： 第28行：
 
*Resolution：128x64；
 
*Resolution：128x64；
 
*Interface： IIC communication；
 
*Interface： IIC communication；
−
*Power supply：3.3V；
+
*Power：3.3V；
  
 
[[File:OLED-Pinout-1.jpg|800px|thumb|center|Microduino-OLED-Pinout1]]
 
[[File:OLED-Pinout-1.jpg|800px|thumb|center|Microduino-OLED-Pinout1]]
第38行： 第39行：
 
main components
 
main components
  
−
*12864Oled Display：2864HSWEG01 [[File:2864HSWEG01.pdf]]
+
*12864Oled Display screen：2864HSWEG01 [[File:2864HSWEG01.pdf]]
 
*Driver IC：SSD1306 [[File:SSD1306-Revision 1.1.pdf]]
 
*Driver IC：SSD1306 [[File:SSD1306-Revision 1.1.pdf]]
  
第54行： 第55行：
  
 
==Applications==
 
==Applications==
−
basic usage sample program of u8glib library
+
The basic usage of u8glib library's sample program 
  
 
Note：core's IIC interface is A4（SDA），A5（SCL），core+'s IIC interface is D20（SDA），D21（SCL）
 
Note：core's IIC interface is A4（SDA），A5（SCL），core+'s IIC interface is D20（SDA），D21（SCL）
  
−
*put your downloaded library in to libraries within Arduino IDE installation folder, If open Arduino IDE, please close all other example program before you open example program within u8glib library;
+
*put your downloaded library into library fold within the Arduino IDE's installation folder. If opened Arduino IDE, please close all other example program before you open example program within u8glib library;
−
*Open the HelloWorld sample program, cancel comment for this line: U8GLIB_SSD1306_128X64 u8g (U8G_I2C_OPT_NONE) (remove "/ /"), the compiler can be downloaded directly through after the download is complete, then "Hello World!" Is displayed on the screen;
+
*Open the HelloWorld sample program, remove comments for this line: U8GLIB_SSD1306_128X64 u8g (U8G_I2C_OPT_NONE) (remove "/ /"), then the compiler it,downloaded it directly. After download, you can see the  "Hello World!" displayed on the screen;
 
*Display character / variables:
 
*Display character / variables:
−
*Use u8g.print (xx) function can be, usage are basically as same as Serial.print (xx).
+
**Use u8g.print (xx) function, just like use Serial.print (xx).
 
*Change the font：
 
*Change the font：
−
*Use u8g.setFont (xx) function to change the font, parentheses "xx" can be replaced by the corresponding font library name (you can search font library in u8g.h within U8glib \ utility folder);
+
**Use u8g.setFont (xx) function to change the font, parentheses "xx" can be replaced by the corresponding font library name (you can search font library in u8g.h within U8glib \ utility folder);
−
*Recommended large font: u8g_font_7x13, recommended font: u8g_font_fixed_v0r, recommended small fonts: u8g_font_chikitar;
+
**Recommended large font: u8g_font_7x13, recommended middle font: u8g_font_fixed_v0r, recommended small fonts: u8g_font_chikitar;
 
*Change coordinates:
 
*Change coordinates:
−
*Use u8g.setPrintPos (x, y) function, if you want to change the display coordinates
+
**Use u8g.setPrintPos (x, y) function, if you want to change the display coordinates
 
*Screen Rotation：
 
*Screen Rotation：
−
*Comment u8g.setRot180() in void setup() function, you flip the screen 180 degrees, you can also change 180 to 90,270;
+
**Post u8g.setRot180() in void setup() function, the screen will flip 180 degrees, you also can change 180 to 90,270;
  
 
|-
 
|-

2014年1月24日 (五) 08:10的版本

Microduino-OLED

Microduino-Oled 12864 is based on SSD1306 0.96 inch 12864 OLED display module. Using the I2C interface, 3.3V power supply.


Features

  • Active light, no backlight, large-angle range;
  • Low driving voltage, low power consumption;
  • I2C communication, saving IO interface, widely used;
  • Small, cheap, opened module;
  • Open source hardware circuit design, compatible with the Arduino IDE development environment for programming;
  • Defines unified interface Microduino specification and contain rich peripheral modules. Set up the quick connection with other Microduino modules and sensors easily and flexibly.


Specifications

  • Resolution：128x64；
  • Interface： IIC communication；
  • Power：3.3V；
文件:OLED-Pinout-1.jpg
Microduino-OLED-Pinout1

Documents

Eagle PCB 文件:Microduino-Oled.zip main components

Development

Applications

The basic usage of u8glib library's sample program

Note：core's IIC interface is A4（SDA），A5（SCL），core+'s IIC interface is D20（SDA），D21（SCL）

  • put your downloaded library into library fold within the Arduino IDE's installation folder. If opened Arduino IDE, please close all other example program before you open example program within u8glib library;
  • Open the HelloWorld sample program, remove comments for this line: U8GLIB_SSD1306_128X64 u8g (U8G_I2C_OPT_NONE) (remove "/ /"), then the compiler it,downloaded it directly. After download, you can see the "Hello World!" displayed on the screen;
  • Display character / variables:
    • Use u8g.print (xx) function, just like use Serial.print (xx).
  • Change the font：
    • Use u8g.setFont (xx) function to change the font, parentheses "xx" can be replaced by the corresponding font library name (you can search font library in u8g.h within U8glib \ utility folder);
    • Recommended large font: u8g_font_7x13, recommended middle font: u8g_font_fixed_v0r, recommended small fonts: u8g_font_chikitar;
  • Change coordinates:
    • Use u8g.setPrintPos (x, y) function, if you want to change the display coordinates
  • Screen Rotation：
    • Post u8g.setRot180() in void setup() function, the screen will flip 180 degrees, you also can change 180 to 90,270;

Buy

History

  • June 23, 2013, Batch completed, formal shelves.
  • June 2, 2013，Second proofing test is completed, No problems found so far, panel batch is complete.
  • May 18, 2013，Test model came out, no power-on reset circuit, not a capacitor resolved.
  • May 16, 2013，Model released, there is a small problem.
  • May 7, 2013，Layout is complete.


Pictures

Microduino OLED Front


Microduino OLED Back


取自“http:///https//wiki.microduino.cn/index.php?title=Microduino-OLED&oldid=415”