“Microduino-CoreSTM32/zh”的版本间的差异

来自Microduino Wikipedia
跳转至： 导航、 搜索
（→‎编程Microduino- CoreSTM32）
Pkj（讨论 | 贡献）
第1行： 第1行：
−
{{Language|Microduino- CoreSTM32}}
+
{{Language|Microduino-CoreSTM32}}
 
{| style="width: 800px;"
 
{| style="width: 800px;"
 
|-
 
|-
 
|
 
|
−
[[file:Microduino- CoreSTM32 -rect.jpg|400px|thumb|right|Microduino- CoreSTM32]]
+
[[file:Microduino-core -rect.jpg|400px|thumb|right|Microduino-Core]]
−
Microduino-CoreSTM32是Microduino系列的核心模块之一，采用 STM32F103CBT6芯片的ARM开发板。'''[[Microduino-CoreSTM32]]'''是一个开放源码硬件与[http://leaflabs.com/docs/hardware/maple-mini.html Maple Mini]兼容，可利用 Microduino 扩展模块和其他电子元件、模块、传感器，做出很多丰富有趣的互动作品。
+
 
 +
'''[[Microduino-CoreSTM32]]''' is one of core modules of Microduino series, '''[[Microduino-CoreSTM32]]''' is an open source hardware and [http://leaflabs.com/docs/hardware/maple-mini.html Maple Mini] compatible. It is an 32-bit ARM Cortex-M3 development board, based on STMicroelectronics' STM32F103CBT6 chip.
 +
 
 +
 
 +
==Features==
 +
* Small, Stackable, Strong
 +
* Open source hardware, using the same development environment as Arduino IDE
 +
* Using the U-Shape 27-pin interface (UPin-27), the standard interface of Microduino series
 +
 
 +
Microduino modules and sensors can be easily stacked and extended through it
 +
* Delivered ready to plug in.
 +
* 2.54mm (0.1 inch) pin pitch, compatible to bread board and hole board
  
−
==特色==
 
−
* 小巧、便宜、堆叠、开放。
 
−
* 开源的硬件电路设计，与Arduino相似的编程开发环境程；
 
−
* Microduino- CoreSTM32可使用Microduino-CoreUSB模块灵活烧入「bootloader」；
 
−
* 统一的 Microduino 接口规范，和丰富的外围模块，可方便、灵活的与其他符合 Microduino 接口规范的模块、传感器进行快速的连接和扩展；
 
−
* 2.54间距的排母接口方便集成到洞洞板。
 
 
|-
 
|-
 
|
 
|
−
==规格==
+
==Specifications==
−
===电气规格===
+
* Microcontroller: STM32F103CBT6
−
*微控制器：STM32F103CBT6
+
* Speed: 72MHz
−
*速度：72MHz的
+
* Operating Voltage: 5V
−
*工作电压：5V
+
* Core Voltage: 3.3V
−
*核心电压：3.3V  
+
* Flash: 128KB
−
*Flash：128KB
+
* SRAM:  20KB
−
* SRAM：20KB
+
* Digital I/O Pins: 14 (of which 6 provide PWM output with D3，D5，D6，D9，D10 and D11)
−
===引脚规格===
+
* Analog Input Pins: 8 (2 more comparing to Arduino Uno)
−
*数字I/ O引脚： 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14(A0),15(A1),16(A2),17(A3),18(SDA),19(SCL),20(A6),21(A7)
+
* DC Current per I/O Pin: 40 mA
−
*模拟输入引脚：A0(ADC12_IN0),A1(ADC12_IN1),A2(ADC12_IN2),A3(ADC12_IN3),10(ADC12_IN4),13(ADC12_IN5),12(ADC12_IN6),11(ADC12_IN7),A6(ADC12_IN8),A7(ADC12_IN9)  
+
* DC Current:  50 mA
−
*串口：
+
* Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data.
−
**Serial（RX1）和1（TX1）。用于接收（RX）和发送（TX）TTL串行数据。
+
* External Interrupts: 2 and 3. These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value. See the attachInterrupt() function for details.
−
**Serial1（RX3）和3（TX3）。用于接收（RX）和发送（TX）TTL串行数据。
+
* PWM: 3, 5, 6, 9, 10, and 11. Provide 8-bit PWM output with the analogWrite() function.
−
* 硬件PWM： 0,1,4,11,12,14(A0),15(A1),16(A2),17(A3),18(SDA),19(SCL),20(A6),21(A7)
+
* SPI: 10 (SS), 11 (MOSI), 12 (MISO), 13 (SCK). These pins support SPI communication using the SPI
−
* SPI：D10(SPI1_NSS)、D11（SPI1_MOSI）、D12（SPI1_MISO）、D13（SPI1_SCK）；
 
−
*IIC：18(SDA)、19(SCL) ；
 
−
*每个I/O口都具有中断功能。
 
  
−
==文档==
+
library.
−
Microduino- CoreSTM32 中使用的主要元器件
+
* TWI: A4 or SDA pin and A5 or SCL pin. Support TWI communication using the Wire library.
−
** MCU: '''[[media: STM32F103CBT6.pdf| STM32F103CBT6]]'''
+
* AREF. Reference voltage for the analog inputs. Used with analogReference().
 +
* Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader
 +
* SRAM 2 KB (ATmega328P)
 +
* EEPROM 1 KB (ATmega328P)
 +
* Clock Speed 16MHz(5V) / 8Mhz(3.3V)
  
−
==开发==
 
−
===设置Microduino- CoreSTM32开发环境===
 
  
−
使用 Maple IDE开发环境：Microduino- CoreSTM32使用与Arduino相同的IDE 语言的开发环境详细的Maple IDE 介绍'''请参考[[开发环境]]'''
+
|-
 +
|
  
−
===编程Microduino- CoreSTM32===
+
==Documents==
−
*请确保你已经安装CoreSTM32的驱动程序
+
* '''[[Microduino-Core]]''' Eagle source file 【'''[[media:Microduino-Core.zip|download]]'''】
−
*下载和安装Microduino-CoreSTM32硬件支持包
+
* '''[[Microduino-Core]]''' main chips and devices
 +
** MCU: '''[[media:ATmega168PA328P.pdf|ATmega168PA/328P]]'''
 +
|-
 +
|
  
−
'''开始你的Microduino- CoreSTM32请参考[[开始_led]]'''
+
==Development==
 +
* Microduino Arduino IDE Configuration
 +
** 1. Install Arduino IDE: Microduino use the same IDE as Arduino, please download Arduino IDE from 【'''[http://arduino.cc/en/Main/Software Arduino IDE official]'''】 and install it in your disk. (if you already have it, just skip this step). Please check Arduino IDE details from 【'''[http://arduino.cc/en/Reference/HomePage Reference]'''】 and 【'''[http://arduino.cc/en/Tutorial/HomePage Workshop]'''】.
 +
** 2. Patch Microduino package: Please download Microduino package for Arduino IDE from 【'''[[media:Microduino-hardware.zip|download]]'''】, and unzip is to {Your Arduino Install Driectory}/hardware directory.
 +
** Microduino Arduino IDE Reference workshop: 【'''[[Arduino IDE Microduino Configuration]]'''】.
 +
** 3. Programming: To upload program to Microduino-Core/Core+ through Arduino IDE, designers are recommended to use '''[[Microduino-FT232R]]''' module.
 +
** 4. Enjoy your Microduino journey!
  
−
===烧写 Microduino- CoreSTM32  BootLoader===
+
* Burn Microduino BootLoader
−
*向 Microduino- CoreSTM32烧写BootLoader，需要使用Microduino-USB2TTL模块。
+
** Bootloader burning is necessary if designers want to update Microduino-Core/Core+ firmware by themselves, designers can leaverage Arduino Uno or another burned Microduino-Core/Core+ to make a new one.
−
*如果玩家得到的是一块Microduino- CoreSTM32空板，则需要利用Microduino-CoreUSB给Microduino- CoreSTM32空板烧写 bootloader，玩家可以参考教程
+
** Microduino bootloader workshop: 【'''[[Burn Bootloader to Microduino-Core/Core+ with an Arduino]]'''】.
−
'''[[你知道怎么用Microduino-CoreUSB向Microduino- CoreSTM32烧写bootloader]]'''。
+
** Bootloader is specified for different Microduino-Core/Core+ configurations, correct one must be selected during burning.
 +
** Initial bootloader is designed for ATmegaX8 series optiboot, which occupies only 512 bytes flash.
 +
|-
 +
|
  
−
==应用==
+
==Applications==
−
*Microduino-CoreSTM32基础教程
+
* room-Microduino
 +
* obdii-Microduino
 +
* pilot-Microduino
 +
* green-Microduino
 +
* music-Microduino
 +
|-
 +
|
  
 +
==Buy==
 +
* Buy '''[http://www.microduino.cc/Modules/Microdoino%20Core%20Modules/Microdoino-Core Microduino-Core]'''
  
−
==历史==
+
|-
 +
|
 +
==History==
 +
*2012/12/16: Published Microduino-Core patch for Arduino IDE
 +
*2012/11/18: Optimized the first formal release, finalized Miroduino-Core configuration
 +
*2012/11/06: Beta version.
  
−
==图片==
+
|-
 +
|
 +
==Pictures==
 +
:[[file:Microduino-Core-t.JPG|thumb|600px|center|Microduino-core Front]]
 +
<br style="clear: left"/>
 +
:[[file:Microduino-Core-b.JPG|thumb|600px|center|Microduino-core Back]]
 +
<br style="clear: left"/>
 +
:[[file:Microduino-Core-3d.jpg|thumb|600px|center|Microduino-core 3D model]]
 +
<br style="clear: left"/>
 +
:[[file:Microduino-Core-Upin27.jpg|thumb|600px|center|Microduino-core Upin27 model]]
 +
<br style="clear: left"/>
 
|}
 
|}

2014年7月14日 (一) 08:38的版本

Language English
Microduino-Core

Microduino-CoreSTM32 is one of core modules of Microduino series, Microduino-CoreSTM32 is an open source hardware and Maple Mini compatible. It is an 32-bit ARM Cortex-M3 development board, based on STMicroelectronics' STM32F103CBT6 chip.


Features

  • Small, Stackable, Strong
  • Open source hardware, using the same development environment as Arduino IDE
  • Using the U-Shape 27-pin interface (UPin-27), the standard interface of Microduino series

Microduino modules and sensors can be easily stacked and extended through it

  • Delivered ready to plug in.
  • 2.54mm (0.1 inch) pin pitch, compatible to bread board and hole board

Specifications

  • Microcontroller: STM32F103CBT6
  • Speed: 72MHz
  • Operating Voltage: 5V
  • Core Voltage: 3.3V
  • Flash: 128KB
  • SRAM: 20KB
  • Digital I/O Pins: 14 (of which 6 provide PWM output with D3，D5，D6，D9，D10 and D11)
  • Analog Input Pins: 8 (2 more comparing to Arduino Uno)
  • DC Current per I/O Pin: 40 mA
  • DC Current: 50 mA
  • Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data.
  • External Interrupts: 2 and 3. These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value. See the attachInterrupt() function for details.
  • PWM: 3, 5, 6, 9, 10, and 11. Provide 8-bit PWM output with the analogWrite() function.
  • SPI: 10 (SS), 11 (MOSI), 12 (MISO), 13 (SCK). These pins support SPI communication using the SPI

library.

  • TWI: A4 or SDA pin and A5 or SCL pin. Support TWI communication using the Wire library.
  • AREF. Reference voltage for the analog inputs. Used with analogReference().
  • Flash Memory 32 KB (ATmega328P) of which 0.5 KB used by bootloader
  • SRAM 2 KB (ATmega328P)
  • EEPROM 1 KB (ATmega328P)
  • Clock Speed 16MHz(5V) / 8Mhz(3.3V)


Documents

Development

  • Microduino Arduino IDE Configuration
    • 1. Install Arduino IDE: Microduino use the same IDE as Arduino, please download Arduino IDE from 【Arduino IDE official】 and install it in your disk. (if you already have it, just skip this step). Please check Arduino IDE details from 【Reference】 and 【Workshop】.
    • 2. Patch Microduino package: Please download Microduino package for Arduino IDE from 【download】, and unzip is to {Your Arduino Install Driectory}/hardware directory.
    • Microduino Arduino IDE Reference workshop: 【Arduino IDE Microduino Configuration】.
    • 3. Programming: To upload program to Microduino-Core/Core+ through Arduino IDE, designers are recommended to use Microduino-FT232R module.
    • 4. Enjoy your Microduino journey!
  • Burn Microduino BootLoader
    • Bootloader burning is necessary if designers want to update Microduino-Core/Core+ firmware by themselves, designers can leaverage Arduino Uno or another burned Microduino-Core/Core+ to make a new one.
    • Microduino bootloader workshop: 【Burn Bootloader to Microduino-Core/Core+ with an Arduino】.
    • Bootloader is specified for different Microduino-Core/Core+ configurations, correct one must be selected during burning.
    • Initial bootloader is designed for ATmegaX8 series optiboot, which occupies only 512 bytes flash.

Applications

  • room-Microduino
  • obdii-Microduino
  • pilot-Microduino
  • green-Microduino
  • music-Microduino

Buy

History

  • 2012/12/16: Published Microduino-Core patch for Arduino IDE
  • 2012/11/18: Optimized the first formal release, finalized Miroduino-Core configuration
  • 2012/11/06: Beta version.

Pictures

Microduino-core Front


Microduino-core Back


Microduino-core 3D model


Microduino-core Upin27 model


取自“http:///https//wiki.microduino.cn/index.php?title=Microduino-CoreSTM32/zh&oldid=3260”