“Microduino-Core+/ko”的版本间的差异

来自Microduino Wikipedia
跳转至： 导航、 搜索
（Created page with "테스트중"）
 
Md（讨论 | 贡献）
 
（未显示同一用户的2个中间版本）
第1行： 第1行：
−
테스트중
+
{{Language|Microduino-Core+}}
 +
{| style="width: 800px;"
 +
|-
 +
|
 +
[[file:Microduino-core+ -rect.jpg|400px|thumb|right|Microduino-Core+]]
 +
 
 +
'''[[Microduino-Core+]]''' 는 '''[www.atmel.com Atmel]'''사의 ATmega644PA/ATmega1284P 시리즈를 메인칩으로 사용하고 있습니다. '''[[Microduino-Core|마이크로두이노 코어]]'''버전보다 성능이 향상된 모듈입니다..
 +
 
 +
'''[[Microduino-Core+]]''' has all features of –Core, can be stacked with modules through UPin-27 Microduino standard bus interface, as smart as '''[http://arduino.cc/en/Main/ArduinoBoardMega2560 Arduino Mega2560]''', but as small as a quarter. Moreover, '''[[Microduino-Core+]]''' has 10 more digital I/O ports than '''[[Microduino-Core]]''', provides 2 hardware serial ports, and more SRAM/Flash/EEPROM, it’s designed for high hardware resource required applications and designs.
 +
 
 +
'''[[Microduino-Core+|마이크로두이노 코어 플러스]]'''는 마이크로두이노 코어의 모든 기능을 가지고 있으며 UPin-27 마이크로두이노 기본 인터페이스를 이용해서 쌓아 올릴수 있다. '''[http://arduino.cc/en/Main/ArduinoBoardMega2560 Arduino Mega2560]'''보드 만큼 스마트하지만 사이즈는 1/4정도 작습니다.
 +
 
 +
Microduino uses the same development environment as Arduino IDE, designers can use the Arduino IDE, Processing on Microduino for idea realization, prototype development and low volume production. Programs can be smoothly migrated from Core to Core+ without any modification.
 +
 
 +
Microduino uses optiboot for bootloader, it takes less Flash than Arduino default engine and optimizes program uploading.
 +
 
 +
Currently, there are 4 different configurations for '''[[Microduino-Core+]]''' modules:
 +
{|class="wikitable"
 +
! Type
 +
! Flash
 +
! SRAM
 +
! EEPROM
 +
! Frequency
 +
! Supply
 +
|-
 +
| ATmega644PA@16M,5V
 +
| 64K
 +
| 4K
 +
| 2K
 +
| 16M
 +
| 5.0V
 +
|-
 +
| ATmega644PA@8M,3V3
 +
| 64K
 +
| 4K
 +
| 2K
 +
| 8M
 +
| 3.3V
 +
|-
 +
| Atmega1284P@16M,5V
 +
| 128K
 +
| 16K
 +
| 4K
 +
| 16M
 +
| 5.0V
 +
|-
 +
| ATmega1284P@8M,3V3
 +
| 128K
 +
| 16K
 +
| 4K
 +
| 8M
 +
| 3.3V
 +
|}
 +
 
 +
Different configurations in frequency and supply voltage:
 +
* Clock frequency and supply voltage are paired; 8M module is supplied by 3.3V voltage, while 16M module is by 5.0V voltage.
 +
* A 16M with 5V '''[[Microduino-Core+]]''' module is recommended for desktop equipments or designs; regarding mobile equipments or designs, a 8M with 3.3V module is suggested for low power and battery supply purposes.
 +
 
 +
 
 +
 
 +
|-
 +
|
 +
==Core vs Core+==
 +
*  '''[[Microduino-Core+]]''' aims at high performance applications which require large SRAM/EEPROM/Flash and more I/O ports, '''[[Microduino-Core]]''' is for main stream applications.
 +
 
 +
* Both '''[[Microduino-Core]]''' and '''[[Microduino-Core+]]''' use UPin-27 interface -- the standard module interface of Microduino series. The main difference between them is MCU chip: -Core module uses ATmega328P/ATmega168PA, as same as Arduino Uno; -Core+ module uses ATmega644PA/ATmega1284P, its performance is similar to Arduino Mega2560.
 +
 
 +
* Configuration difference between '''[[Microduino-Core]]''' and '''[[Microduino-Core+]]'''
 +
:{|class="wikitable"
 +
! Microduino
 +
! Chip
 +
! Flash
 +
! SRAM
 +
! EEPROM
 +
! Digital I/O
 +
! Analog I/O
 +
! PWM
 +
! Hardware Serial
 +
|-
 +
| rowspan="2" | Core
 +
| Atmega168PA
 +
| 16K
 +
| 1K
 +
| 512
 +
| 23
 +
| 8
 +
| 6
 +
| 1
 +
|-
 +
| ATmega328P
 +
| 32K
 +
| 2K
 +
| 1K
 +
| 23
 +
| 8
 +
| 6
 +
| 1
 +
|-
 +
| rowspan="2" | Core+
 +
| Atmega644PA
 +
| 64K
 +
| 4K
 +
| 2K
 +
| 32
 +
| 8
 +
| 6
 +
| 2
 +
|-
 +
| ATmega1284P
 +
| 128K
 +
| 16K
 +
| 4K
 +
| 32
 +
| 8
 +
| 6
 +
| 2
 +
|}
 +
 
 +
* According above table, Core and Core+ are different in Flash, EEPROM and SRAM size, also, they supply different size of digital I/O and hardware serial ports, and there are 10 more digital I/O and 1 more hardware serial ports in Core+. Designers can select specific module regarding different application requirements on function, performance and power.
 +
 
 +
* Both Core and Core+ use UPin-27 interface, Microduino program can be smoothly ported between them.
 +
 
 +
|-
 +
|
 +
 
 +
==Features==
 +
* Small, Stack, Strong
 +
* Open source hardware, using the same development environment as Arduino IDE
 +
* '''[[Microduino-Core+]]''' can be burned with ISP, same as Arduino, easy "bootloader"
 +
* Using the U-Shape 27-pin interface (UPin-27), the standard interface of Microduino, all Microduino modules and sensors can be easily stacked and extended through it
 +
* Delivered ready to plug in.
 +
* 2.54mm (0.1 inch) pin pitch, compitable to bread board and hole board
 +
 
 +
|-
 +
|
 +
 
 +
==Specifications==
 +
* Microcontroller: ATmega644PA/ATmega1284P
 +
* Operating Voltage: 5V/3.3V
 +
* Digital I/O Pins: 24 (of which 6 provide PWM output with D7，D8，D9，D10，D22 and D23, PWM ports are different to '''[[Microduino-Core]]''')
 +
* Analog Input Pins: 8 (2 more comparing to Arduino Uno)
 +
* DC Current per I/O Pin: 40 mA
 +
* DC Current:  50 mA
 +
* Serial: 2 set of serial ports. D0 (RX0) + D1 (TX0) and D2 (RX1) + D3 (TX1), used to receive (RX) and transmit (TX) TTL serial data.
 +
* External Interrupts: 2, 3 and 6. These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value. See the attachInterrupt() function for details.
 +
* PWM: 7, 8, 9, 10, 22 and 23. Provide 8-bit PWM output with the analogWrite() function.
 +
* SPI: 10 (SS), 11 (MOSI), 12 (MISO), 13 (SCK). These pins support SPI communication using the SPI library.
 +
* IIC: D20 (SDA) pin and D21 (SCL) pin. Support TWI communication using the Wire library.
 +
* AREF. Reference voltage for the analog inputs. Used with analogReference().
 +
 
 +
* Currently, there are 4 different configurations for '''[[Microduino-Core+]]''' modules:
 +
:{|class="wikitable"
 +
! Type
 +
! Flash
 +
! SRAM
 +
! EEPROM
 +
! Frequecy
 +
! Supply
 +
|-
 +
| ATmega644PA@16M，5V
 +
| 64K
 +
| 4K
 +
| 2K
 +
| 16M
 +
| 5.0V
 +
|-
 +
| ATmega644PA@8M，3V3
 +
| 64K
 +
| 4K
 +
| 2K
 +
| 8M
 +
| 3.3V
 +
|-
 +
| Atmega1284P@16M，5V
 +
| 128K
 +
| 16K
 +
| 4K
 +
| 16M
 +
| 5.0V
 +
|-
 +
| ATmega1284P@8M，3V3
 +
| 128K
 +
| 16K
 +
| 4K
 +
| 8M
 +
| 3.3V
 +
|}
 +
 
 +
 
 +
:[[file:Microduino-Core+_Pinout_1.jpg|600px|thumb|center|Microduino-Core+ Pin-out]]
 +
<br style="clear: left"/>
 +
:[[file:Microduino-Core+_Pinout_2.jpg|600px|thumb|center|Microduino-Core+ Pin-out]]
 +
<br style="clear: left"/>
 +
:[[file:Microduino-Core+_Pinout_3.jpg|600px|thumb|center|Microduino-Core+ Pin-out]]
 +
<br style="clear: left"/>
 +
 
 +
 
 +
|-
 +
|
 +
 
 +
==Documents==
 +
 
 +
* '''[[Microduino-Core+]]''' Eagle source file 【'''[[media:Microduino-Core+.zip|download]]'''】
 +
* '''[[Microduino-Core+]]''' main chips and devices
 +
** MCU: '''[[media:coreATmega644PA1284P.pdf|ATmega644PA/1284P]]'''
 +
|-
 +
|
 +
 
 +
==Development==
 +
* Microduino Arduino IDE Configuration
 +
** 1. Install Arduino IDE: Microduino use the same IDE as Arduino, please download Arduino IDE from 【'''[http://arduino.cc/en/Main/Software Arduino IDE official]'''】 and install it in your disk. (if you already have it, just skip this step). Please check Arduino IDE details from 【'''[http://arduino.cc/en/Reference/HomePage Reference]'''】 and 【'''[http://arduino.cc/en/Tutorial/HomePage Workshop]'''】.
 +
** 2. Patch Microduino package: Please download Microduino package for Arduino IDE from 【'''[[media:Microduino.zip|download]]'''】, and unzip is to {Your Arduino Install Driectory}/hardware directory.
 +
** Microduino Arduino IDE Reference workshop: 【'''[[Arduino IDE Microduino Configuration]]'''】.
 +
** 3. Programming: To upload program to Microduino-Core/Core+ through Arduino IDE, designers are recommended to use '''[[Microduino-FT232R]]''' module.
 +
** 4. Enjoy your Microduino journey!
 +
 
 +
* Burn Microduino BootLoader
 +
** Bootloader burning is necessary if designers want to update Microduino-Core/Core+ firmware by themselves, designers can leaverage Arduino Uno or another burned Microduino-Core/Core+ to make a new one.
 +
** Microduino bootloader workshop: 【'''[[Burn Bootloader to Microduino-Core/Core+ with an Arduino]]'''】.
 +
** Bootloader is specified for different Microduino-Core/Core+ configurations, correct one must be selected during burning.
 +
** Initial bootloader is designed for ATmegaX8 series optiboot, which occupies only 512 bytes flash.
 +
|-
 +
|
 +
 
 +
==Applications==
 +
* room-Microduino
 +
* obdii-Microduino
 +
* pilot-Microduino
 +
* green-Microduino
 +
* music-Microduino
 +
|-
 +
|
 +
 
 +
==FQA==
 +
*Do you have ATmega1284P @ 8M 3.3V version?
 +
**So far no.
 +
 
 +
==Buy==
 +
* Buy '''[http://www.microduino.cc/Modules/Microdoino%20Core%20Modules/Microdoino-Core-Plus Microduino-Core+]'''
 +
 
 +
|-
 +
|
 +
==History==
 +
*2012/12/16: Published Microduino-Core patch for Arduino IDE
 +
*2012/11/18: Optimized the first formal release, finalized Miroduino-Core configuration
 +
*2012/11/06: Beta version.
 +
 
 +
|-
 +
|
 +
==Pictures==
 +
:[[file:Microduino-Core+-t.JPG|thumb|600px|center|Microduino-core+ Front]]
 +
<br style="clear: left"/>
 +
:[[file:Microduino-Core+-b.JPG|thumb|600px|center|Microduino-core+ Back]]
 +
<br style="clear: left"/>
 +
|}

2014年9月2日 (二) 15:36的最新版本

Language English
Microduino-Core+

Microduino-Core+ 는 [www.atmel.com Atmel]사의 ATmega644PA/ATmega1284P 시리즈를 메인칩으로 사용하고 있습니다. 마이크로두이노 코어버전보다 성능이 향상된 모듈입니다..

Microduino-Core+ has all features of –Core, can be stacked with modules through UPin-27 Microduino standard bus interface, as smart as Arduino Mega2560, but as small as a quarter. Moreover, Microduino-Core+ has 10 more digital I/O ports than Microduino-Core, provides 2 hardware serial ports, and more SRAM/Flash/EEPROM, it’s designed for high hardware resource required applications and designs.

마이크로두이노 코어 플러스는 마이크로두이노 코어의 모든 기능을 가지고 있으며 UPin-27 마이크로두이노 기본 인터페이스를 이용해서 쌓아 올릴수 있다. Arduino Mega2560보드 만큼 스마트하지만 사이즈는 1/4정도 작습니다.

Microduino uses the same development environment as Arduino IDE, designers can use the Arduino IDE, Processing on Microduino for idea realization, prototype development and low volume production. Programs can be smoothly migrated from Core to Core+ without any modification.

Microduino uses optiboot for bootloader, it takes less Flash than Arduino default engine and optimizes program uploading.

Currently, there are 4 different configurations for Microduino-Core+ modules:

Type Flash SRAM EEPROM Frequency Supply
ATmega644PA@16M,5V 64K 4K 2K 16M 5.0V
ATmega644PA@8M,3V3 64K 4K 2K 8M 3.3V
Atmega1284P@16M,5V 128K 16K 4K 16M 5.0V
ATmega1284P@8M,3V3 128K 16K 4K 8M 3.3V

Different configurations in frequency and supply voltage:

  • Clock frequency and supply voltage are paired; 8M module is supplied by 3.3V voltage, while 16M module is by 5.0V voltage.
  • A 16M with 5V Microduino-Core+ module is recommended for desktop equipments or designs; regarding mobile equipments or designs, a 8M with 3.3V module is suggested for low power and battery supply purposes.


Core vs Core+

  • Microduino-Core+ aims at high performance applications which require large SRAM/EEPROM/Flash and more I/O ports, Microduino-Core is for main stream applications.
  • Both Microduino-Core and Microduino-Core+ use UPin-27 interface -- the standard module interface of Microduino series. The main difference between them is MCU chip: -Core module uses ATmega328P/ATmega168PA, as same as Arduino Uno; -Core+ module uses ATmega644PA/ATmega1284P, its performance is similar to Arduino Mega2560.
Microduino Chip Flash SRAM EEPROM Digital I/O Analog I/O PWM Hardware Serial
Core Atmega168PA 16K 1K 512 23 8 6 1
ATmega328P 32K 2K 1K 23 8 6 1
Core+ Atmega644PA 64K 4K 2K 32 8 6 2
ATmega1284P 128K 16K 4K 32 8 6 2
  • According above table, Core and Core+ are different in Flash, EEPROM and SRAM size, also, they supply different size of digital I/O and hardware serial ports, and there are 10 more digital I/O and 1 more hardware serial ports in Core+. Designers can select specific module regarding different application requirements on function, performance and power.
  • Both Core and Core+ use UPin-27 interface, Microduino program can be smoothly ported between them.

Features

  • Small, Stack, Strong
  • Open source hardware, using the same development environment as Arduino IDE
  • Microduino-Core+ can be burned with ISP, same as Arduino, easy "bootloader"
  • Using the U-Shape 27-pin interface (UPin-27), the standard interface of Microduino, all Microduino modules and sensors can be easily stacked and extended through it
  • Delivered ready to plug in.
  • 2.54mm (0.1 inch) pin pitch, compitable to bread board and hole board

Specifications

  • Microcontroller: ATmega644PA/ATmega1284P
  • Operating Voltage: 5V/3.3V
  • Digital I/O Pins: 24 (of which 6 provide PWM output with D7，D8，D9，D10，D22 and D23, PWM ports are different to Microduino-Core)
  • Analog Input Pins: 8 (2 more comparing to Arduino Uno)
  • DC Current per I/O Pin: 40 mA
  • DC Current: 50 mA
  • Serial: 2 set of serial ports. D0 (RX0) + D1 (TX0) and D2 (RX1) + D3 (TX1), used to receive (RX) and transmit (TX) TTL serial data.
  • External Interrupts: 2, 3 and 6. These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value. See the attachInterrupt() function for details.
  • PWM: 7, 8, 9, 10, 22 and 23. Provide 8-bit PWM output with the analogWrite() function.
  • SPI: 10 (SS), 11 (MOSI), 12 (MISO), 13 (SCK). These pins support SPI communication using the SPI library.
  • IIC: D20 (SDA) pin and D21 (SCL) pin. Support TWI communication using the Wire library.
  • AREF. Reference voltage for the analog inputs. Used with analogReference().
Type Flash SRAM EEPROM Frequecy Supply
ATmega644PA@16M，5V 64K 4K 2K 16M 5.0V
ATmega644PA@8M，3V3 64K 4K 2K 8M 3.3V
Atmega1284P@16M，5V 128K 16K 4K 16M 5.0V
ATmega1284P@8M，3V3 128K 16K 4K 8M 3.3V


文件:Microduino-Core+ Pinout 1.jpg
Microduino-Core+ Pin-out


文件:Microduino-Core+ Pinout 2.jpg
Microduino-Core+ Pin-out


文件:Microduino-Core+ Pinout 3.jpg
Microduino-Core+ Pin-out



Documents

Development

  • Microduino Arduino IDE Configuration
    • 1. Install Arduino IDE: Microduino use the same IDE as Arduino, please download Arduino IDE from 【Arduino IDE official】 and install it in your disk. (if you already have it, just skip this step). Please check Arduino IDE details from 【Reference】 and 【Workshop】.
    • 2. Patch Microduino package: Please download Microduino package for Arduino IDE from 【download】, and unzip is to {Your Arduino Install Driectory}/hardware directory.
    • Microduino Arduino IDE Reference workshop: 【Arduino IDE Microduino Configuration】.
    • 3. Programming: To upload program to Microduino-Core/Core+ through Arduino IDE, designers are recommended to use Microduino-FT232R module.
    • 4. Enjoy your Microduino journey!
  • Burn Microduino BootLoader
    • Bootloader burning is necessary if designers want to update Microduino-Core/Core+ firmware by themselves, designers can leaverage Arduino Uno or another burned Microduino-Core/Core+ to make a new one.
    • Microduino bootloader workshop: 【Burn Bootloader to Microduino-Core/Core+ with an Arduino】.
    • Bootloader is specified for different Microduino-Core/Core+ configurations, correct one must be selected during burning.
    • Initial bootloader is designed for ATmegaX8 series optiboot, which occupies only 512 bytes flash.

Applications

  • room-Microduino
  • obdii-Microduino
  • pilot-Microduino
  • green-Microduino
  • music-Microduino

FQA

  • Do you have ATmega1284P @ 8M 3.3V version?
    • So far no.

Buy

History

  • 2012/12/16: Published Microduino-Core patch for Arduino IDE
  • 2012/11/18: Optimized the first formal release, finalized Miroduino-Core configuration
  • 2012/11/06: Beta version.

Pictures

Microduino-core+ Front


Microduino-core+ Back


取自“http:///https//wiki.microduino.cn/index.php?title=Microduino-Core%2B/ko&oldid=4045”