“Microduino-Cube-S1”的版本间的差异

来自Microduino Wikipedia
跳转至: 导航搜索
Features
Pkj讨论 | 贡献
Features
 
(未显示同一用户的5个中间版本)
第6行: 第6行:
 
==Features==
 
==Features==
 
*Compatible with the pin of Arduino Uno;
 
*Compatible with the pin of Arduino Uno;
*Uniformed Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard;
+
*Uniform Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard;
 
*Onboard analog button and sensor interface;
 
*Onboard analog button and sensor interface;
  
 
==Specification==
 
==Specification==
*Electrical specifications
+
*Electrical specification
 
**MicroUSB power supply;
 
**MicroUSB power supply;
**3.3V regular;
+
**3.3V constant voltage;
**Select the 5V or 3.3V power via PWR jumper, default is 3.3V;
+
**Select the 5V or 3.3V power via PWR jumper(The default voltage is 3.3V);
**Onboard power supply (5V、PWR) indicator;
+
**Onboard power supply indicator(5V and PWR)
  
*Extended pin
+
*Extension
 
**Onboard reset button;
 
**Onboard reset button;
**OLED fixed base;
+
**The fixed OLED base;
**Two serial ports, RX0、TX0(Serial) and D2、D3(Serial1);
+
**Two serial ports including (RX0,TX0)and (D2,D3);
 
**Two IIC interfaces;
 
**Two IIC interfaces;
***Two analogy button interfaces, and connect to A7;
+
***Two analog button interfaces connected to A7;
**Sensor interface can be combined by jumper, The player can make the connection by yoursefl, as follows:
+
**The sensor interface can be selected and combined through jumpers:
***PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND.
+
***PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND (Users can make the connection as they like).
  
 
[[file:Microduino-Cube-S1-Pinout1.jpg|800px|thumb|center|Microduino-Cube-S1]]
 
[[file:Microduino-Cube-S1-Pinout1.jpg|800px|thumb|center|Microduino-Cube-S1]]
第30行: 第30行:
  
 
==Document==
 
==Document==
Eagle PCB local downlaod
+
Eagle PCB: '''[[File:Microduino-Cube-S1.zip]]'''
Main components:
+
 
*3.3V Regulator chip LP2985: '''[[File:LP2985.pdf]]'''
+
Main Component:
 +
*3.3V Voltage Stablizing chip LP2985: '''[[File:LP2985.pdf]]'''
  
 
==Development==
 
==Development==
  
It can be used with other Microduino modules, sensor to achieve specific functions.
+
Microduino-Cube-S1 is capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard, achieving specific function.
  
 
[[file:Microduino-Cube-S1-Pinout4.jpg|800px|thumb|center|Microduino-Cube-S1]]
 
[[file:Microduino-Cube-S1-Pinout4.jpg|800px|thumb|center|Microduino-Cube-S1]]
  
 
==Application==
 
==Application==
*You can download the test example, and combine OLED to test two analogy of Microduino-Cube-S1, test program:
+
*You can download Microduino test program, which together with OLED to test the function of Microduino-Cube-S1's two analog buttons. Just as follows:
 
https://github.com/Microduino/Microduino_Tutorials/commit/b0e0fe74269ee0f6a886d8fa8db497ec57cc4073
 
https://github.com/Microduino/Microduino_Tutorials/commit/b0e0fe74269ee0f6a886d8fa8db497ec57cc4073
*Prepared hardware:Microduino FT232R, Microduino Core, Microduino-Cube-S1, Microduino OLED;
+
*Hardware Needed:Microduino FT232R, Microduino Core, Microduino-Cube-S1 and Microduino OLED;
*Prepared software:Microduino example program (Arduino part), Arduino IDE(1.0 release and upper);
+
*Software Needed:Microduino example program (Arduino part) and Arduino IDE(Version 1.0 and higher);
*Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", download directly;
+
*Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", then download directly;
*After download, OLED displays "No button is pressed ",
+
*After the download, "No button is pressed " is displayed on the OLED,
**Press the left button, OLED displays "Press the left button" which means the left button was pressed;
+
**Press the left button and "Press the left button" will come out, meaning the left button gets pressed;
**Press the right button, OLED displays "Press the rignt button" which means the right button was pressed;
+
**Press the right button and "Press the right button" will be displayed on the OLED, meaning the right button is pressed;
**If no button was pressed, OLED displays "No button is pressed ", the same state with initial state.
+
**When no button is pressed, "No button is pressed " will be displayed, which is just like the initial state.
  
 
==Bug==
 
==Bug==

2014年8月22日 (五) 02:54的最新版本

Language English
Microduino-Cube-S1

Features

  • Compatible with the pin of Arduino Uno;
  • Uniform Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard;
  • Onboard analog button and sensor interface;

Specification

  • Electrical specification
    • MicroUSB power supply;
    • 3.3V constant voltage;
    • Select the 5V or 3.3V power via PWR jumper(The default voltage is 3.3V);
    • Onboard power supply indicator(5V and PWR) ;
  • Extension
    • Onboard reset button;
    • The fixed OLED base;
    • Two serial ports including (RX0,TX0)and (D2,D3);
    • Two IIC interfaces;
      • Two analog button interfaces connected to A7;
    • The sensor interface can be selected and combined through jumpers:
      • PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND (Users can make the connection as they like).
文件:Microduino-Cube-S1-Pinout2.jpg
Microduino-Cube-S1-Pinout
文件:Microduino-Cube-S1-Pinout3.jpg
Microduino-Cube-S1-Pinout

Document

Eagle PCB: 文件:Microduino-Cube-S1.zip

Main Component:

Development

Microduino-Cube-S1 is capable of having a fast and flexible connection and extension with other modules and sensors meeting Microduino interface standard, achieving specific function.

Microduino-Cube-S1

Application

  • You can download Microduino test program, which together with OLED to test the function of Microduino-Cube-S1's two analog buttons. Just as follows:

https://github.com/Microduino/Microduino_Tutorials/commit/b0e0fe74269ee0f6a886d8fa8db497ec57cc4073

  • Hardware Needed:Microduino FT232R, Microduino Core, Microduino-Cube-S1 and Microduino OLED;
  • Software Needed:Microduino example program (Arduino part) and Arduino IDE(Version 1.0 and higher);
  • Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", then download directly;
  • After the download, "No button is pressed " is displayed on the OLED,
    • Press the left button and "Press the left button" will come out, meaning the left button gets pressed;
    • Press the right button and "Press the right button" will be displayed on the OLED, meaning the right button is pressed;
    • When no button is pressed, "No button is pressed " will be displayed, which is just like the initial state.

Bug

History

Picture

Front

Microduino-Cube-S1 Front

Back

Microduino-Cube-S1 Back

Video