“Microduino-10DOF”的版本间的差异

来自Microduino Wikipedia
跳转至： 导航、 搜索
（→‎FQA）
 
（未显示4个用户的30个中间版本）
第1行： 第1行：
 +
{{Language|Microduino-10DOF}}
 
{| style="width: 800px;"
 
{| style="width: 800px;"
 
|-
 
|-
 
|
 
|
−
[[file:Microduino-10dof-rect.jpg|400px|thumb|right|Microduino-10DOF]]
+
[[file:Microduino-10DOF-rect.jpg|400px|thumb|right|Microduino-10DOF]]
−
'''[[Microduino-10DOF]]''' module integrates 4 kinds of sensors, they are MPU6050 for 3-axis gyroscope and 3-axis accelerometer; HMC5883L for 3-axis compass; and BMP085 for temperature and pressure sensor.
+
'''[[Microduino-10DOF]]''' Microduino-10-DOF integrates four sensors including one sensor of 3-axis gyroscope and 3-axis accelerometer(MPU6050), one magnetic field strength sensor(HMC5883L) and a digital barometer sensor(BMP180). This module adopts I2C interface, widely used in automation control, such as aeromodelling,self-balancing car.
−
the module use IIC interface.
+
 
  
 
|-
 
|-
第10行： 第11行：
  
 
==Features==
 
==Features==
−
*Three kinds of sensors communicate through I2c is useing, saving IO interface, wide range of uses;
+
*Adopt three I2C-communicating sensors and save IO interface, used widely;
−
*Small, cheap, stackable, open source;
+
*Small, cheap, stackable, open;
−
*Open source hardware circuit design, compatible with the Arduino IDE development environment for programming process;
+
*Open hardware circuit design and Arduino compatible programming development environment;
−
*Microduino unified interface specification(UPin-27), and rich peripheral modules can be easily and flexibly with other eligible Microduino interface specification modules, sensors for quick connection and expansion;
+
*Uniform Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors  in accord with Microduino interface standard;
−
*2.54 pitch row female connector for easy integration into breadboard.
+
*Easy to be integrated to pegboards with a 2.45-pitch female header connector interface.  
−
 
 
 
|-
 
|-
 
|
 
|
−
 
  
 
==Specification==
 
==Specification==
第24行： 第23行：
 
'''Magnetic field intensity sensor：HMC5883L'''
 
'''Magnetic field intensity sensor：HMC5883L'''
  
−
*HMC5883L including the most advanced high-resolution HMC118X series magnetoresistive sensor;
+
*HMC5883L contains the most advanced high-resolution HMC118X series magnetic-resistive sensor;
−
*Honeywell patents with integrated amplifier, a drive automatic degaussing, offset calibration, the accuracy of the compass can be controlled analog to digital 12 bit converter in the 1 ° ~ 2 °;
+
*Integrated circuit with Honeywell patents includes an amplifier, automatic degaussing actuator, offset calibration and a 12-bit AD converter which can control the accuracy of the compass to the range of 1 ° ~ 2 °;
−
*Simple I2C serial bus interface.
+
*A simple IIC serial bus interface.
  
  
  
−
'''数字气压传感器：BMP180'''
+
'''Digital Pressure Sensor：BMP180'''
  
−
*BMP180 包含电阻式压力传感器、AD 转换器、和控制单元；
+
*BMP180 comprises a resistive pressure sensor, an AD converter, and a control unit;
−
*其中控制单元包括E2PROM和I2C接口。BMP180传送未经补偿的温度、压力值。E2PROM 储存了176位单独的标准数据，这些标准数据用于补偿、温度依赖性和传感器其他的一些参数。
+
**The control unit includes E2PROM and I2C interfaces. BMP180 transmits uncompensated temperature and pressure values. E2PROM stores 176bit individual standard data, which are used for compensation of temperature dependence and other sensor parameters.
−
*可用量程：300hPa至1100hPa (对应海拔-500m到+9000m)
+
*Available range: 300hPa to 1100hPa (corresponding sea level to -500m -- +9000 m)
−
*绝对精度最低可以达到0.03hPa
+
*Lowest absolute accuracy can be achieved--0.03hPa
−
*UP=压力数据（16 to 19bit）
+
*UP = pressure data (16 to 19bit)
−
*UT=温度数据（0 to 15bit）
+
*UT = temperature data (0 to 15bit)
  
−
'''三轴加速度+三轴陀螺仪传感器：MPU6050'''
+
'''Triaxial accelerometer + three-axis gyro sensor：MPU6050'''
  
−
*它集成了3轴MEMS陀螺仪，3轴MEMS加速度计，以及一个可扩展的数字运动处理器DMP（Digital Motion Processor）；
+
*It integrates a 3-axis MEMS gyroscope, a three-axis MEMS accelerometer, and a scalable DMP (Digital Motion Processor);
  
−
*以数字输出6轴或9轴的旋转矩阵、四元数(quaternion)、欧拉角格式(EulerAngleforma)的融合演算数据；
+
*Digital output for 6 or 9 axis rotation matrix, quaternion, Euler angles format (EulerAngleforma) data fusion algorithms;
−
*具有131LSBs/°/sec敏感度与全格感测范围为±250、±500、±1000与±2000°/sec的3轴角速度感测器(陀螺仪)；
+
*With 131LSBs / °sec sensitivity and whole cell sensing range is ± 250, ± 500, ± 1000 and ± 2000 ° / sec of 3-axis angular velocity sensor (gyroscope);
−
*可程式控制，且程式控制范围为±2g、±4g、±8g和±16g的3轴加速器；
+
*3-axis accelerometer is programmable control and the range is ± 2g, ± 4g, ± 8g and ± 16g;
−
*移除加速器与陀螺仪轴间敏感度，降低设定给予的影响与感测器的飘移；
+
*Reduces the impact of setting given and sensor drift by removing the shaft between the accelerator and the gyro sensitivity, ;
−
*数字运动处理(DMP:DigitalMotionProcessing)引擎可减少复杂的融合演算数据、感测器同步化、姿势感应等的负荷；
+
*The complexity of data fusion algorithms, sensors synchronization, load position sensors can be reduced by useing Digital motion processing (DMP: DigitalMotionProcessing) engine
−
*以数位输出的温度传感器；
+
*A temperature sensor with digital output;
−
*陀螺仪运作电流：5mA，陀螺仪待命电流：5uA；加速器运作电流：500uA，加速器省电模式电流：40uA@10Hz高达400kHz快速模式的I2C。
+
*Gyro operational current: 5mA, gyroscope standby current: 5uA; accelerator operation current: 500uA, accelerator power saving mode current: 40uA @ 10Hz up to 400kHz fast mode of IIC.
  
 
|-
 
|-
 
|
 
|
−
 
+
[[File:10DOF-Pinout-1.jpg|800px|thumb|center|Microduino-10DOF-Pinout1]]
−
 
 
  
 
==Documents==
 
==Documents==
−
* Snapshot of '''[[Microduino-10DOF]]''' schematic
 
−
:[[file:Microduino-10DOF-SCH.png|600px|thumb|left|Microduino-10DOF Schematic]]
 
−
<br style="clear: left"/>
 
−
:[[file:Microduino-10DOF-PCB.png|600px|thumb|left|Microduino-10DOFPCB]]
 
−
<br style="clear: left"/>
 
 
* '''[[Microduino-10DOF]]''' Eagle source file 【'''[[media:Microduino-10DOF.zip|download]]'''】
 
* '''[[Microduino-10DOF]]''' Eagle source file 【'''[[media:Microduino-10DOF.zip|download]]'''】
 
* '''[[Microduino-10DOF]]''' main chips and devices
 
* '''[[Microduino-10DOF]]''' main chips and devices
 
** 3-axis gyroscope + 3-axis accelerometer: 【'''[[media:MPU6000andMPU6050.pdf|MPU6050]]'''】
 
** 3-axis gyroscope + 3-axis accelerometer: 【'''[[media:MPU6000andMPU6050.pdf|MPU6050]]'''】
−
** 3-axis compass: 【'''[[media:HMC5883L.pdf|HMC5883L]]'''】
+
** 3-axis compass: 【'''[[media:HMC5883L_en.pdf|HMC5883L]]'''】
−
** temperature + pressure sensor: 【'''[[media:BMP085.pdf|BMP085]]'''】
+
** temperature + pressure sensor: 【'''[[media:BMP180_en.pdf|BMP180]]'''】
  
−
:[[file:Micromodule-10DOF-1.png|800px|thumb|left|Microduino-10DOF-Pinout]]
 
−
<br style="clear: left"/>
 
  
 +
|-
 +
|
 +
 +
== Development ==
 +
 +
'''Arduino Libraries and support packages'''
 +
*Microduino_10DOF:https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Libraries/_05_Microduino_10DOF
 +
*【BMP180 Library'''[https://github.com/jrowberg/i2cdevlib/tree/master/Arduino/BMP085 github Download]''' ， '''[https://github.com/adafruit/Adafruit-BMP085-Library github Download]'''  】
 +
*【HMC5883L Library'''[https://github.com/jrowberg/i2cdevlib/tree/master/Arduino/HMC5883L github Download]''' 】
 +
*【MPU6050 Library'''[https://github.com/jrowberg/i2cdevlib/tree/master/Arduino/MPU6050 github Download]''' 】
 +
*【I2Cdev Library'''[https://github.com/jrowberg/i2cdevlib/tree/master/Arduino/I2Cdev github Download]''' 】
 +
*【U8glib Library'''[http://code.google.com/p/u8glib/ google Download ]''' 】
 +
 +
|-
 +
|
 +
 +
== Applications ==
 +
 +
'''Download'''
 +
 +
*MultiWii and source code ：https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino%20Axis
 +
*OLED tests 10dof source code：[[File:Program Test 10DOF.zip]]
 +
 +
'''Use open source of MWC test 10dof module'''
 +
 +
*The hardware need to be prepared：Microduino FT232R、Microduino Core、Microduino 10dof；
 +
*The software need to be prepared：MultiWii（Linux/Mac/Windows）、MultiWii source code（Arduino）、Arduino IDE（above 1.0 version）；
 +
*First use IED open MultiWii.ino in MultiWii directory，the project can be load directly. The provided source code has already been configured for Microduino 10dof.Select board "Microduino Core (Atmega328P@16M,5V)"，and then downloaded directly；
 +
*Turn on the PC. Take the Windows as example，Execution "MultiWiiConf.exe" in MultiWiiConf \ application.windows32 directory，select the corresponding serial port, then click "Start" to test module.
 +
 +
'''Use OLED test 10dof module'''
 +
 +
*The hardware need to be prepare：Microduino FT232R、Microduino Core、Microduino 10dof、Microduino OLED；
 +
*The software need to be prepare：Arduino IDE（above 1.0 version）、Microduino provide test source code（Arduino）、BMP180 Library、HMC5883 LLibrary、MPU6050 Library、I2Cdev Library、U8glib Library；
 +
*The downloaded libraries should be put into library folder within Arduino IDE's installation folder;
 +
*Start Arduino IED，Open the test code that Microduino provided，select board "Microduino Core (Atmega328P@16M,5V)"，and then downloaded directly；
 +
 +
*After the download, please pay attention to the OLED is complete：
 +
**Top row is used to test HM5883L，The module is placed in the horizontal position, turn the module can be observed that pointer always points to an angle;
 +
**The middle row is used to test  BMP180, observing pressure and temperature data;
 +
**The last line is used to test MPU6050, tilt module,then you can observe the ball rolling toward the corresponding direction.
  
  
 
|-
 
|-
 
|
 
|
 +
 +
==FQA==
 +
*How to run 10DOF test program in Mac?
 +
**Running a Mac Osx 10.9.3 with IDE 1.0.5 with boads.txt from Microduino see
 +
'''http://www.microduino.cc/wiki/index.php?title=Arduino_IDE_Microduino Hardware Support Package'''
 +
**Download test program from Microduino-10DOF
 +
'''http://www.microduino.cc/wiki/index.php?title=Microduino-10DOF'''
 +
**Modified somewhat and running on a Core+See Inclinomter
 +
'''https://plus.google.com/u/0/communities/117933845827174624649/stream/e9bf5dd3-74d2-4e17-af1c-8a54c6bfb9e8'''
  
 
==History==
 
==History==
−
*2013年4月8日 @老潘orz发现HMC5883L S1管脚未连接VDD。
+
*April 8,2013,@laoPanorz found SI pin doesn't connect to VDD in HMC5883l.
−
*2013年2月28日，测试版出炉，无大问题。
+
*Feb 28,2013, test release publish, no major issue.
−
*2013年2月18日，初版打样。
+
*Feb 18,2013, the first official release layout.
 
|-
 
|-
 
|
 
|
 +
 
==Pictures==
 
==Pictures==
−
:[[file:Microduino-10DOF-T.jpg|thumb|600px|center|Microduino 10DOF Front]]
+
:[[file:Microduino-10DOF-t.jpg|thumb|600px|center|Microduino 10DOF Front]]
 
<br style="clear: left"/>
 
<br style="clear: left"/>
−
:[[file:Microduino-10DOF-B.jpg|thumb|600px|center|Microduino 10DOF Back]]
+
:[[file:Microduino-10DOF-b.jpg|thumb|600px|center|Microduino 10DOF Back]]
 
<br style="clear: left"/>
 
<br style="clear: left"/>
 
* Testing video: [http://v.youku.com/v_show/id_XNTIzMTY3MTU2.html Microduino-10DOF MPU6050 Testing]
 
* Testing video: [http://v.youku.com/v_show/id_XNTIzMTY3MTU2.html Microduino-10DOF MPU6050 Testing]

2015年1月3日 (六) 03:56的最新版本

Language English
Microduino-10DOF

Microduino-10DOF Microduino-10-DOF integrates four sensors including one sensor of 3-axis gyroscope and 3-axis accelerometer(MPU6050), one magnetic field strength sensor(HMC5883L) and a digital barometer sensor(BMP180). This module adopts I2C interface, widely used in automation control, such as aeromodelling,self-balancing car.


Features

  • Adopt three I2C-communicating sensors and save IO interface, used widely;
  • Small, cheap, stackable, open;
  • Open hardware circuit design and Arduino compatible programming development environment;
  • Uniform Microduino interface standard and rich peripheral modules, capable of having a fast and flexible connection and extension with other modules and sensors in accord with Microduino interface standard;
  • Easy to be integrated to pegboards with a 2.45-pitch female header connector interface.

Specification

Magnetic field intensity sensor：HMC5883L

  • HMC5883L contains the most advanced high-resolution HMC118X series magnetic-resistive sensor;
  • Integrated circuit with Honeywell patents includes an amplifier, automatic degaussing actuator, offset calibration and a 12-bit AD converter which can control the accuracy of the compass to the range of 1 ° ~ 2 °;
  • A simple IIC serial bus interface.


Digital Pressure Sensor：BMP180

  • BMP180 comprises a resistive pressure sensor, an AD converter, and a control unit;
    • The control unit includes E2PROM and I2C interfaces. BMP180 transmits uncompensated temperature and pressure values. E2PROM stores 176bit individual standard data, which are used for compensation of temperature dependence and other sensor parameters.
  • Available range: 300hPa to 1100hPa (corresponding sea level to -500m -- +9000 m)
  • Lowest absolute accuracy can be achieved--0.03hPa
  • UP = pressure data (16 to 19bit)
  • UT = temperature data (0 to 15bit)

Triaxial accelerometer + three-axis gyro sensor：MPU6050

  • It integrates a 3-axis MEMS gyroscope, a three-axis MEMS accelerometer, and a scalable DMP (Digital Motion Processor);
  • Digital output for 6 or 9 axis rotation matrix, quaternion, Euler angles format (EulerAngleforma) data fusion algorithms;
  • With 131LSBs / °sec sensitivity and whole cell sensing range is ± 250, ± 500, ± 1000 and ± 2000 ° / sec of 3-axis angular velocity sensor (gyroscope);
  • 3-axis accelerometer is programmable control and the range is ± 2g, ± 4g, ± 8g and ± 16g;
  • Reduces the impact of setting given and sensor drift by removing the shaft between the accelerator and the gyro sensitivity, ;
  • The complexity of data fusion algorithms, sensors synchronization, load position sensors can be reduced by useing Digital motion processing (DMP: DigitalMotionProcessing) engine
  • A temperature sensor with digital output;
  • Gyro operational current: 5mA, gyroscope standby current: 5uA; accelerator operation current: 500uA, accelerator power saving mode current: 40uA @ 10Hz up to 400kHz fast mode of IIC.
文件:10DOF-Pinout-1.jpg
Microduino-10DOF-Pinout1

Documents


Development

Arduino Libraries and support packages

Applications

Download

Use open source of MWC test 10dof module

  • The hardware need to be prepared：Microduino FT232R、Microduino Core、Microduino 10dof；
  • The software need to be prepared：MultiWii（Linux/Mac/Windows）、MultiWii source code（Arduino）、Arduino IDE（above 1.0 version）；
  • First use IED open MultiWii.ino in MultiWii directory，the project can be load directly. The provided source code has already been configured for Microduino 10dof.Select board "Microduino Core (Atmega328P@16M,5V)"，and then downloaded directly；
  • Turn on the PC. Take the Windows as example，Execution "MultiWiiConf.exe" in MultiWiiConf \ application.windows32 directory，select the corresponding serial port, then click "Start" to test module.

Use OLED test 10dof module

  • The hardware need to be prepare：Microduino FT232R、Microduino Core、Microduino 10dof、Microduino OLED；
  • The software need to be prepare：Arduino IDE（above 1.0 version）、Microduino provide test source code（Arduino）、BMP180 Library、HMC5883 LLibrary、MPU6050 Library、I2Cdev Library、U8glib Library；
  • The downloaded libraries should be put into library folder within Arduino IDE's installation folder;
  • Start Arduino IED，Open the test code that Microduino provided，select board "Microduino Core (Atmega328P@16M,5V)"，and then downloaded directly；
  • After the download, please pay attention to the OLED is complete：
    • Top row is used to test HM5883L，The module is placed in the horizontal position, turn the module can be observed that pointer always points to an angle;
    • The middle row is used to test BMP180, observing pressure and temperature data;
    • The last line is used to test MPU6050, tilt module,then you can observe the ball rolling toward the corresponding direction.


FQA

  • How to run 10DOF test program in Mac?
    • Running a Mac Osx 10.9.3 with IDE 1.0.5 with boads.txt from Microduino see

http://www.microduino.cc/wiki/index.php?title=Arduino_IDE_Microduino Hardware Support Package

    • Download test program from Microduino-10DOF

http://www.microduino.cc/wiki/index.php?title=Microduino-10DOF

    • Modified somewhat and running on a Core+See Inclinomter

https://plus.google.com/u/0/communities/117933845827174624649/stream/e9bf5dd3-74d2-4e17-af1c-8a54c6bfb9e8

History

  • April 8,2013,@laoPanorz found SI pin doesn't connect to VDD in HMC5883l.
  • Feb 28,2013, test release publish, no major issue.
  • Feb 18,2013, the first official release layout.

Pictures

Microduino 10DOF Front


Microduino 10DOF Back


取自“http:///https//wiki.microduino.cn/index.php?title=Microduino-10DOF&oldid=6963”