|
|
| （未显示2个用户的2个中间版本） |
| 第7行： |
第7行： |
| | | | |
| | ==设备== | | ==设备== |
| − | *'''[[Microduino-Core]]''' | + | *'''[[Microduino-Core/zh]]''' |
| − | *'''[[Microduino-FT232R]]''' | + | *'''[[Microduino-USBTTL/zh]]''' |
| | *其他硬件设备 | | *其他硬件设备 |
| | **面包板跳线 一盒 | | **面包板跳线 一盒 |
| 第69行： |
第69行： |
| | | | |
| | ==程序== | | ==程序== |
| − | <source lang="cpp">
| |
| | | | |
| − | | + | [https://github.com/Microduino/Microduino_Tutorials/tree/master/Microduino_Advanced/Microduino8_8static Microduino8_8static] |
| − | //Pin 连接到 74HC595的ST_CP
| |
| − | int latchPin = 8;
| |
| − | //Pin 连接到 74HC595的SH_CP
| |
| − | int clockPin = 12;
| |
| − | ////Pin 连接到 74HC595的DS
| |
| − | int dataPin = 11;
| |
| − |
| |
| − |
| |
| − |
| |
| − | void setup() {
| |
| − | //波特率为9600，用于调试
| |
| − | Serial.begin(9600);
| |
| − | //设置 latchpin 为 output
| |
| − | pinMode(latchPin, OUTPUT);
| |
| − |
| |
| − | }
| |
| − |
| |
| − | void loop() {
| |
| − | //Smile for 8x8 Matrix LED
| |
| − | digitalWrite(latchPin, 0);
| |
| − | shiftOut(dataPin, clockPin, B01111111); //掩盖的列(col)
| |
| − | shiftOut(dataPin, clockPin, B00111100); //行row
| |
| − | digitalWrite(latchPin, 1);
| |
| − |
| |
| − | digitalWrite(latchPin, 0);
| |
| − | shiftOut(dataPin, clockPin, B10111111); //掩盖的列(col)
| |
| − | shiftOut(dataPin, clockPin, B01000010); //行row
| |
| − | digitalWrite(latchPin, 1);
| |
| − |
| |
| − | digitalWrite(latchPin, 0);
| |
| − | shiftOut(dataPin, clockPin, B11011111); //掩盖的列(col)
| |
| − | shiftOut(dataPin, clockPin, B10100101); //行row
| |
| − | digitalWrite(latchPin, 1);
| |
| − |
| |
| − | digitalWrite(latchPin, 0);
| |
| − | shiftOut(dataPin, clockPin, B11101111); //掩盖的列(col)
| |
| − | shiftOut(dataPin, clockPin, B10000001); //行row
| |
| − | digitalWrite(latchPin, 1);
| |
| − |
| |
| − | digitalWrite(latchPin, 0);
| |
| − | shiftOut(dataPin, clockPin, B11110111); //掩盖的列(col)
| |
| − | shiftOut(dataPin, clockPin, B10100101); //行row
| |
| − | digitalWrite(latchPin, 1);
| |
| − |
| |
| − | digitalWrite(latchPin, 0);
| |
| − | shiftOut(dataPin, clockPin, B11111011); //掩盖的列(col)
| |
| − | shiftOut(dataPin, clockPin, B10011001); //行row
| |
| − | digitalWrite(latchPin, 1);
| |
| − |
| |
| − | digitalWrite(latchPin, 0);
| |
| − | shiftOut(dataPin, clockPin, B11111101); //掩盖的列(col)
| |
| − | shiftOut(dataPin, clockPin, B01000010); //行row
| |
| − | digitalWrite(latchPin, 1);
| |
| − |
| |
| − | digitalWrite(latchPin, 0);
| |
| − | shiftOut(dataPin, clockPin, B11111110); //掩盖的列(col)
| |
| − | shiftOut(dataPin, clockPin, B00111100); //行row
| |
| − | digitalWrite(latchPin, 1);
| |
| − |
| |
| − |
| |
| − | }
| |
| − |
| |
| − | void shiftOut(int myDataPin, int myClockPin, byte myDataOut) {
| |
| − |
| |
| − | //初始化设置
| |
| − | int i=0;
| |
| − | int pinState;
| |
| − | pinMode(myClockPin, OUTPUT);
| |
| − | pinMode(myDataPin, OUTPUT);
| |
| − |
| |
| − | //clear everything out just in case to
| |
| − | //prepare shift register for bit shifting
| |
| − | digitalWrite(myDataPin, 0);
| |
| − | digitalWrite(myClockPin, 0);
| |
| − |
| |
| − | //for each bit in the byte myDataOut�
| |
| − | //NOTICE THAT WE ARE COUNTING DOWN in our for loop
| |
| − | //This means that %00000001 or "1" will go through such
| |
| − | //that it will be pin Q0 that lights.
| |
| − | for (i=7; i>=0; i--) {
| |
| − | digitalWrite(myClockPin, 0);
| |
| − |
| |
| − | //if the value passed to myDataOut and a bitmask result
| |
| − | // true then... so if we are at i=6 and our value is
| |
| − | // %11010100 it would the code compares it to %01000000
| |
| − | // and proceeds to set pinState to 1.
| |
| − | if ( myDataOut & (1<<i) ) {
| |
| − | pinState= 1;
| |
| − | }
| |
| − | else {
| |
| − | pinState= 0;
| |
| − | }
| |
| − |
| |
| − | //Sets the pin to HIGH or LOW depending on pinState
| |
| − | digitalWrite(myDataPin, pinState);
| |
| − | //register shifts bits on upstroke of clock pin
| |
| − | digitalWrite(myClockPin, 1);
| |
| − | //zero the data pin after shift to prevent bleed through
| |
| − | digitalWrite(myDataPin, 0);
| |
| − | }
| |
| − |
| |
| − | //stop shifting
| |
| − | digitalWrite(myClockPin, 0);
| |
| − | }
| |
| − | | |
| − | | |
| − | </source>
| |
| | | | |
| | ==调试== | | ==调试== |
