“Microduino-LM4863”的版本间的差异

来自Microduino Wikipedia
跳转至： 导航、 搜索
Pkj（讨论 | 贡献）
 
（未显示2个用户的4个中间版本）
第1行： 第1行：
 +
{{Language|Microduino-LM4863}}
 
{| style="width: 800px;"
 
{| style="width: 800px;"
 
|-
 
|-
 
|
 
|
−
[[file:Microduino-LM4863-rect.jpg|400px|thumb|right|Microduino-LM4863]]
+
[[file:Microduino-LM4863-rect1.jpg|400px|thumb|right|Microduino-LM4863]]
 +
Microduino-LM4863 is a D-Class Amplifier Module. Widely used in music embedded system.
 +
 
 
|-
 
|-
 
|
 
|
 +
==Feature==
 +
*2.54 Connector with good compatibility;
 +
*Suppress power noise, gain stability;
 +
*Small, cheap, stackable, opened platform
 +
*Open source hardware circuit design, compatible with the Arduino IDE development environment for programming;
 +
*Define unified interface Microduino specification and contain rich peripheral modules. Set up the quick connection with other Microduino modules and sensors easily and flexibly;
 +
*2.54 pitch row female connector for easy integration into breadboard.
  
 +
 +
|-
 +
|
 
==Specifications==
 
==Specifications==
 +
*Provide 2.2W output for 4Ω load;
 +
*Operating Voltage：2.0-5.5V；
 +
*Externally controlled, low-power shutdown mode, typical shutdown current of 0.7uA.
 +
 
[[File:LM4863-Pinout-2.jpg|800px|thumb|center|Microduino-LM4863-Pinout]]
 
[[File:LM4863-Pinout-2.jpg|800px|thumb|center|Microduino-LM4863-Pinout]]
 
[[File:LM4863-Pinout-1.jpg|800px|thumb|center|Microduino-LM4863-Pinout]]
 
[[File:LM4863-Pinout-1.jpg|800px|thumb|center|Microduino-LM4863-Pinout]]
 +
 +
==Document==
 +
Eagle PCB '''[[File:Microduino-LM4863.zip]]'''
 +
 +
===Main Component===
 +
*Amplifier chip：LM4863  '''[[File:LM4863.pdf]]'''
 +
 +
==Development==
 +
*Make sure the 5V power supply current can reach 500ma, not recommended use FT232R debugging directly, becasue FT232R's output current is small.
 +
 +
===Arduino library and supported package===
 +
*【SimpleSDAudio library'''[[http://www.hackerspace-ffm.de/wiki/index.php?title=SimpleSDAudio download ]''' 】
 +
*【SimpleSDAudio updated library '''[[File:Lib SimpleSDAudio.zip]]''' 】
 +
 +
 +
===How to use the library===
 +
*Original library SD module CS pin is D4, need change to D7;
 +
*Original library can not directly support Microduino Core +, we have modified this library to solve this problem;
 +
 +
*Recommend 2GB or less (including 2GB) FAT format TF card.
 +
 +
 +
===Externally controlled low-power shutdown===
 +
*In many applications, the shutdown port's level conversion is finished by the controller, but it can also be used to implement by a one-way blade switch;
 +
**Connect a pull-up resistor on the third pin of Second row pin female which near the D13 pin, then disconnect switch, this pin will be pulled low, so the Amplifier begin to work;
 +
**Turn on the switch，pull-up resistor will pull up the voltage, then LM4863 stop work.
 +
 +
==Application==
 +
 +
===Program Download===
 +
*Audio file conversion tool：'''[[File:Tools_lm4863.zip]]'''
 +
 +
===The Audio experiment using Core and SD===
 +
*Prepared Hardware：Microduino FT232R、Microduino Core、Microduino SD、Microduino LM4863；
 +
*Prepared Software：Arduino IDE（1.0 release upper）、Microduino provides test program（Arduino part）、SimpleSDAudio library、Audio file creation tools；
 +
*Put the downloaded library to the libraries folder of Arduino IDE installation;
 +
*Copy the "EXAMPLE.AFAM" in examples folder to memory card;
 +
*Start Arduino IDE，open the "BareMinimum" program,card type chosse "Microduino Core (Atmega328P@16M,5V)",download directly；
 +
*Then you can listen it！
 +
**If you want to play your own audio, just need replace the "EXAMPLE.AFM" by you made audio file.
 +
 +
===The process to make an audio file===
 +
*Convert any audio file into a. Wav format using a software "Format Factory";
 +
*Generate an audio file：
 +
**We need to use a SoX-based tool, and then choose the appropriate conversion process based on the operating frequency that your Microduino selected; 
 +
**Decompression the tool，then enter into“Arduino with 16 MHz”folder，put the audio file into this folder,and drag to "FullRate@16MHz_Stereo.bat" (16M full stereo) batch on；
 +
**then you can convert the file, will pop up a dialog box appears "Press any key to continue ...";
 +
**After completed, you will find a new folder, the converted file is there.
  
 
==Pictures==
 
==Pictures==

2014年2月16日 (日) 01:41的最新版本

Language English
文件:Microduino-LM4863-rect1.jpg
Microduino-LM4863

Microduino-LM4863 is a D-Class Amplifier Module. Widely used in music embedded system.

Feature

  • 2.54 Connector with good compatibility;
  • Suppress power noise, gain stability;
  • Small, cheap, stackable, opened platform
  • Open source hardware circuit design, compatible with the Arduino IDE development environment for programming;
  • Define unified interface Microduino specification and contain rich peripheral modules. Set up the quick connection with other Microduino modules and sensors easily and flexibly;
  • 2.54 pitch row female connector for easy integration into breadboard.


Specifications

  • Provide 2.2W output for 4Ω load;
  • Operating Voltage：2.0-5.5V；
  • Externally controlled, low-power shutdown mode, typical shutdown current of 0.7uA.
文件:LM4863-Pinout-2.jpg
Microduino-LM4863-Pinout
文件:LM4863-Pinout-1.jpg
Microduino-LM4863-Pinout

Document

Eagle PCB 文件:Microduino-LM4863.zip

Main Component

Development

  • Make sure the 5V power supply current can reach 500ma, not recommended use FT232R debugging directly, becasue FT232R's output current is small.

Arduino library and supported package


How to use the library

  • Original library SD module CS pin is D4, need change to D7;
  • Original library can not directly support Microduino Core +, we have modified this library to solve this problem;
  • Recommend 2GB or less (including 2GB) FAT format TF card.


Externally controlled low-power shutdown

  • In many applications, the shutdown port's level conversion is finished by the controller, but it can also be used to implement by a one-way blade switch;
    • Connect a pull-up resistor on the third pin of Second row pin female which near the D13 pin, then disconnect switch, this pin will be pulled low, so the Amplifier begin to work;
    • Turn on the switch，pull-up resistor will pull up the voltage, then LM4863 stop work.

Application

Program Download

The Audio experiment using Core and SD

  • Prepared Hardware：Microduino FT232R、Microduino Core、Microduino SD、Microduino LM4863；
  • Prepared Software：Arduino IDE（1.0 release upper）、Microduino provides test program（Arduino part）、SimpleSDAudio library、Audio file creation tools；
  • Put the downloaded library to the libraries folder of Arduino IDE installation;
  • Copy the "EXAMPLE.AFAM" in examples folder to memory card;
  • Start Arduino IDE，open the "BareMinimum" program,card type chosse "Microduino Core (Atmega328P@16M,5V)",download directly；
  • Then you can listen it！
    • If you want to play your own audio, just need replace the "EXAMPLE.AFM" by you made audio file.

The process to make an audio file

  • Convert any audio file into a. Wav format using a software "Format Factory";
  • Generate an audio file：
    • We need to use a SoX-based tool, and then choose the appropriate conversion process based on the operating frequency that your Microduino selected;
    • Decompression the tool，then enter into“Arduino with 16 MHz”folder，put the audio file into this folder,and drag to "FullRate@16MHz_Stereo.bat" (16M full stereo) batch on；
    • then you can convert the file, will pop up a dialog box appears "Press any key to continue ...";
    • After completed, you will find a new folder, the converted file is there.

Pictures

Microduino LM4863 Front


Microduino LM4863 Back


取自“http:///https//wiki.microduino.cn/index.php?title=Microduino-LM4863&oldid=639”