“Microduino-Cube-V1”的版本间的差异

来自Microduino Wikipedia
跳转至: 导航搜索
Specifications
Pkj讨论 | 贡献
第1行: 第1行:
Microduino-Cube-V1
+
{{Language | Microduino-Cube-V1}}
 
{| style="width: 800px;"
 
{| style="width: 800px;"
 
|-
 
|-

2014年3月26日 (三) 03:11的版本

Language English
Microduino-Cube-V1

Features

  • Pin compatible with Arduino uno;
  • Two UPin-27 standard interfaced female heades, and the corresponding pin has connected;
  • Define unified interface Microduino specification and contain rich peripheral modules. Set up the quick connection with other Microduino modules and sensors easily and flexibly;
  • Two Female Heade's each pin interconnects and vertical arrangement on the board which can reduce the overlay height;
  • Onboard analog buttons, extended interface;

Specifications

  • Electrical specifications
    • MicroUSB power supply;
    • 3.3V regular;
    • Select the 5V or 3.3V power via PWR jumper, default is 3.3V;
    • Onboard power supply (5V、PWR) indicator;
  • Extended pin
    • Onboard reset button;
    • OLED fixed base;
    • Two serial ports, RX0、TX0(Serial) and D2、D3(Serial1);
    • Two IIC interfaces;
    • Two analogy button interfaces, and connect to A7;
    • Seven analogy buttons. Two buttons on base board and connected to A6. Five button on overlay board and connected to base analogy button interface by DuPont line;
    • Two group sensor interface, can be combined by jumper. The player can make the connection by yoursefl, as follows:
      • PWR,GND,A3 or PWR,GND,A6;
      • PWR,D5,GND or D4,D5,GND。
文件:Microduino-Cube-V1-Pinout1.jpg
Microduino-Cube-V1-Pinout
文件:Microduino-Cube-V1-Pinout2.jpg
Microduino-Cube-V1-Pinout
文件:Microduino-Cube-V1-Pinout3.jpg
Microduino-Cube-V1-Pinout


  • Components
    • base board:with two UPin-27 standard interface;
    • Overlay board: use to fix the five analogy buttons, OLED;

Document

Eagle PCB local download Main components:

Development

It can be used with other Microduino modules, sensor to achieve specific functions.

Application

  • You can download the test example, and combine OLED to test two analogy of Microduino-Cube-V1, test program Microduino-Cube-V1-Text.zip
  • Prepared hardware:Microduino FT232R, Microduino Core, Microduino-Cube-V1, Microduino OLED;
  • Prepared software:Microduino example program (Arduino part), Arduino IDE(1.0 release and upper);
  • Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", download directly;
  • After the download is completed, OLED displays similar patterns with analogy keyboard. Press each button on floor and roof analog buttons can simulate the corresponding position's button.

Buy

History

Picture

Front

Microduino-Cube-V1 Front

Back

Microduino-Cube-V1 Back

Video