查看“Microduino-Encoder”的源代码

{{Language|Microduino-Encoder}}
{| style="width: 800px;"
|-
|



[[File: Microduino-Encoder-rect.jpg|400px|thumb|right|Microduino- Encoder]]

Microduino-Encoder is application board based rotary encoder control.       












==Feature==
*Uniform Microduino interface standard and rich external modules, easy for connection with other modules and sensors with Microduino interface standard;  
*Onboard analog key and sensor interface; 
*Onboard rotary encoder. 
==Specification==
*Electrical specification  
**MicroUSB power supply;  
**3V3 stabilivolt; 
**PWR can select different voltage value (5v or 3.3v) through jumpers;  
**Onboard power source(5v and 3.3v) indicator;  

*Extension 
**Onboard reset key; 
**OLED fixation base board; 
**Serial RX0 and TX0 interface; 
**Two IIC interfaces; 
**Two analog keys connected to A6;  
**There are bonding pads of analog serial port(A0,A1 and A2) and GND on the base board.(5v and 3.3v): 

[[file:Microduino-Encoder-Pinout1Big1.jpg|800px|thumb|center|Microduino-Encoder-Pinout]]
[[file:Microduino-Encoder-Pinout2Big1.jpg|800px|thumb|center|Microduino-Encoder-Pinout]]

==Document==
*Chip：'''[[File:xxxx.pdf]]'''
*Rotary encoder：'''[[File:xxxx.pdf]]'''

==Development==
It can has a fast connection and extension with encoder and other Microduino modules to achieve different function.  
==Application==
*You can download Microduino test programs to have a simple test of its function:

[https://github.com/Microduino/Microduino_Tutorials/commit/da150a429c15c78262f9fd26a6d5e8ed827321e5 Rotary Encoder Test]
*All Hardware: Microduino USBTTL, Microduino-Core and Microduino- Encoder；
*All Software: Microduino test program(Arduino terminal) and Arduino IDE(Version 1.0 or higher);
*Open Microduino test program with IDE, choose Microduino-Core(Atmega328P@16M,5V) as the board and then download; 
*Open serial monitor after download and confirm baud rate as 115200;
**Data keeps increasing when rotating right;
**Data keeps decreasing when rotating left; 
**Press down the encoder and the data clears;

==Purchase==

==History==

==Picture==

==Front==
[[file:Microduino-Encoder-F.JPG|thumb|600px|center|Microduino-Encoder Front]]
==Back==
[[file:Microduino-Encoder-b.JPG|thumb|600px|center|Microduino-Encoder Back]]
==Video==
|}