查看“Microduino-Core-S1”的源代码

Microduino-Cube-S1
{| style="width: 800px;"
|-
|
==特色==
*Pin compatible with Arduino uno;；
*2.54 pitch board is the base for Microduino module, the same name pin are connected to each other on board, easy to debug.
*Define unified interface Microduino specification and contain rich peripheral modules. Set up the quick connection with other Microduino modules and sensors easily and flexibly;
*Onboard analog buttons, extended interface；

==Specification==
*Electrical specifications
**MicroUSB power supply；
**3.3V regular；
**Select the 5V or 3.3V power via PWR jumper, default is 3.3V；
**Onboard power supply (5V、PWR) indicator；

*Extended pin
**Onboard reset button；
**OLED fixed base；
**Two serial ports, RX0、TX0(Serial) and D2、D3(Serial1)；
**Tw IIC interfaces；
****Two analogy button interfaces, and connect to A7；
**Sensor interface can be combined by jumper, The player can make the connection by yoursefl, as follows：
***PWR, A3, GND, PWR or PWR, A3, GND, GND or PWR, D6, GND, PWR or PWR, D6, GND,GND.

==Document==
Eagle PCB local downlaod
Main components：
*3.3V Regulator chip LP2985： '''[[File:LP2985.pdf]]'''

==Development==

It can be used with other Microduino modules, sensor to achieve specific functions.

==Application==
*You can download the test example, and combine OLED to test two analogy of Microduino-Cube-S1, test program '''[[Microduino-Cube-S1-Text.zip]]'''
*Prepared hardware：Microduino FT232R, Microduino Core, Microduino-Cube-S1, Microduino OLED；
*Prepared software：Microduino example program (Arduino part), Arduino IDE(1.0 release and upper)；
*Open the example program in IDE, select the board "Microduino Core (Atmega328P@16M,5V)", download directly;
*After download, OLED displays "No button is pressed ",
**Press the left button, OLED displays "Press the left button" which means the left button was pressed；
**Press the right button, OLED displays "Press the rignt button" which means the right button was pressed；
**If no button was pressed, OLED displays "No button is pressed ", the same state with initial state.


==Bug==

==History==

==Picture==

==Front==

==Back==

==Video==
|}