查看“MPU6050.getYawPitchRoll()”的源代码

<p style="color: #666666;font-size:220%">'''mpu.getYawPitchRoll(ypr);'''</p>
<br>

<p style="color: #E87E05;font-size:135%">'''作用'''</p>
得到姿态传感器的俯仰，翻滚，偏航


<p style="color: #E87E05;font-size:135%">'''参数'''</p>
float ypr[3]：三个浮点小数，分别存储 俯仰，翻滚，偏航


<p style="color: #E87E05;font-size:135%">'''示例'''</p>
<source lang="cpp">

#include <MPU6050_6Axis_Microduino.h>
//#include "MPU6050.h" // not necessary if using MotionApps include file

// class default I2C address is 0x68
// specific I2C addresses may be passed as a parameter here
// AD0 low = 0x68 (default for SparkFun breakout and InvenSense evaluation board)
// AD0 high = 0x69
MPU6050 mpu;

// uncomment "OUTPUT_READABLE_QUATERNION" if you want to see the actual
// quaternion components in a [w, x, y, z] format (not best for parsing
// on a remote host such as Processing or something though)
//#define OUTPUT_READABLE_QUATERNION

// uncomment "OUTPUT_READABLE_YAWPITCHROLL" if you want to see the yaw/
// pitch/roll angles (in degrees) calculated from the quaternions coming
// from the FIFO. Note this also requires gravity vector calculations.
// Also note that yaw/pitch/roll angles suffer from gimbal lock (for
// more info, see: http://en.wikipedia.org/wiki/Gimbal_lock)
#define OUTPUT_READABLE_YAWPITCHROLL

// orientation/motion vars
Quaternion q;           // [w, x, y, z]         quaternion container
float ypr[3];           // [yaw, pitch, roll]   yaw/pitch/roll container and gravity vector
uint8_t mpuMode;
bool mpuReady;

// ================================================================
// ===                      INITIAL SETUP                       ===
// ================================================================

void setup() {
    // initialize serial communication
    // (115200 chosen because it is required for Teapot Demo output, but it's
    // really up to you depending on your project)
    Serial.begin(115200);
    while (!Serial); // wait for Leonardo enumeration, others continue immediately

    //set MPU mode
    mpuMode = MODE_DMP;    //MODE_DMP/MODE_SW
    // verify connection
    // load and configure the MPU
    Serial.println(F("Initializing MPU..."));
    mpuReady = mpu.begin(mpuMode);
    if (!mpuReady) {
        // ERROR!
        // 1 = initial memory load failed
        // 2 = DMP configuration updates failed
        // (if it's going to break, usually the code will be 1)
        Serial.print(F("MPU Initialization failed!"));
    }
}

// ================================================================
// ===                    MAIN PROGRAM LOOP                     ===
// ================================================================

void loop() {
    // if programming failed, don't try to do anything
    if (!mpuReady) return;
    
#ifdef OUTPUT_READABLE_QUATERNION
    // display quaternion values in easy matrix form: w x y z
    mpu.getQuaternion(&q);
    Serial.print("quat\t");
    Serial.print(q.w);
    Serial.print("\t");
    Serial.print(q.x);
    Serial.print("\t");
    Serial.print(q.y);
    Serial.print("\t");
    Serial.println(q.z);
#endif

#ifdef OUTPUT_READABLE_YAWPITCHROLL
    // display Euler angles in degrees
    mpu.getYawPitchRoll(ypr);
    Serial.print("ypr\t");
    Serial.print(ypr[0]);
    Serial.print("\t");
    Serial.print(ypr[1]);
    Serial.print("\t");
    Serial.println(ypr[2]);
#endif
}

</source>

[[MCookie-Motion_Reference|返回MCookie-Motion_Reference界面]]