查看“MCookie-Hub”的源代码

{{Language|mCookie-Hub}}
{| style="width: 800px;"
|-
|
[[File: mCookie-Hub-rect.jpg|400px|thumb|right]]
mCookie-Hub is designed for ease of the connection between [[Microduino Sensor Series]] and the core modules on the UPIN27 base board as well as further extended experiment.










==Features==
*Integrate twelve sensor interfaces; 
*Small size with sensor interface integrated on the Upin 27 base board; 
*All function pins are extended; 
*Prevent reverse sensor connection; 

==Specification==
*All mCookie function pins are connected to the base board of the Hub, including digits, analog, serial port and IIC interface; 
*Hub's interface rules: '''GND, VCC, signal 1 and signal 2''';

*Two IIC interfaces; 

*Pin Description: 
Sensor interface rules: '''GND, VCC, signal 1 and signal 2'''' or '''GND, VCC, signal 1 and NC(empty)'' 
Hub interface rules: '''GND, VCC, signal 1 and signal 2''''. 
*Such as: 
**Photosensitive sensor interface rules: ''GND, VCC, signal 1 and NC(empty)''. Since it is analog sensor, you can detect(A0-A7) by analog port. Seen from the picture, the hub can be connected to the location of 10, 11 and 12, and the corresponding pins areA6,A2 and A0. 
**Since the temperature and humidity sensor uses IIC interface, we can connect it to "1" or "2". 
[[file:mCookie-sensorhub_rule.JPG|thumb|800px|center]]

==Document==

==Development==
*Stack with Microduino core modules and have an external connection with Microduino sensors. Select the right interface according to different sensors.
**Sensors adopting analog port: 
[[Microduino-Sound]],[[Microduino-Light],[[Microduino-Joystick]],[[Microduino-Moisture]],[[Microduino-Water line]]
**[[mCookie-OLED]],[[Microduino-Temp&Hum]] (Need to choose IIC interface.) 

==Project==

==Purchase==

==History==

==Pictures==
 [[file:mCookie-sensorhub -F.JPG|thumb|600px|center]]
 [[file:mCookie-sensorhub -b.JPG|thumb|600px|center]]
==Video==
|}