查看“检测颜色的RGB”的源代码

{| style="width: 800px;"
|-
|
<p style="color: #4F4E4E;font-size:220%">'''检测颜色的RGB示例'''</p>
<br>
检测要识别的颜色的RGB值，以及环境光的强度
<br>
<br>
<p style="color: #E87E05;font-size:155%">所需硬件</p>
*[[mCookie-Core]]
*[[mCookie-Battery]]
*[[mCookie-Hub/zh|mCookie-Hub]]
*[[Sensor-Gen&RGB/zh|Sensor-Gen&RGB]]
<br>
<p style="color: #E87E05;font-size:155%">电路搭建</p>
将Battery、Core、Hub堆叠在一起，使用4pin传感器线连接传感器与Hub扩展板的IIC接口，通过MicroUSB数据线接入电脑。
<br>
<p style="color: #E87E05;font-size:155%">代码</p>
<source lang="cpp">
#include <Microduino_Gesture.h>
// Global Variables
Gesture gestureSensor;


void setup() {

  // Initialize Serial port
  Serial.begin(9600);

  // Initialize Gesture (configure I2C and initial values)
  if ( gestureSensor.begin() ) {
    Serial.println(F("Gesture initialization complete"));
  } else {
    Serial.println(F("Something went wrong during Gesture init!"));
  }

  // Start running the Gesture light sensor (no interrupts)
  if ( gestureSensor.enableLightSensor(false) ) {
    Serial.println(F("Light sensor is now running"));
  } else {
    Serial.println(F("Something went wrong during light sensor init!"));
  }

  // Wait for initialization and calibration to finish
  delay(500);
}

void loop() {
  // Read the light levels (ambient, red, green, blue)

  Serial.print("Ambient: ");
  Serial.print(gestureSensor.readAmbientLight());
  Serial.print(" Red: ");
  Serial.print(gestureSensor.readRedLight());
  Serial.print(" Green: ");
  Serial.print(gestureSensor.readGreenLight());
  Serial.print(" Blue: ");
  Serial.println(gestureSensor.readBlueLight());

  // Wait 1 second before next reading
  delay(1000);
}
</source>

*该例程效果为:下载程序后，保持USB线连接，打开串口(波特率设置为9600)，观察返回值。 
*用Sensor-Gen&RGB识别不同颜色的RGB值
*推荐距离:被测颜色与Sensor-Gen&RGB垂直距离3cm左右为最佳，并根据实际情况进行调整
*注：外界环境光对识别到的RGB值会有影响
*在室内白色灯光且无阳光直射的环境下测试得到颜色RGB返回值为：
[[file:Microduino-Sensor-Gen&RGB_1.JPG|600px|center|颜色RGB返回值]]
<br>

<br>
|}

[[Sensor-Gen&RGB Reference  | 返回Sensor-Gen&RGB库语法手册]]