查看“Microduino-Shield Cube-S2/zh”的源代码

{{Language | Microduino-Cube-S2}}
{| style="width: 800px;"
|-
|
[[File:Microduino-S2-rect.jpg|400px|thumb|right|Microduino-Cube-S2]]










==Feature==
*Include interfaces of [[Microduino-TFT]] and [[Microduino0-OLED](IIC)]；
*Onboard analog key as well as sensor interface;  
*With parallel Upin27 interface, easy for connection and extension with other Microduino modules or devices meeting Microduino interface standard;  

==Specification==
*Electrical specification  
**MicroUSB power supply;  
**3V3 voltage stabilitation（AMS1117）；
**PWR can select voltage value by jumpers. (5V or 3.3V) (The default is 3.3V);  
**Onboard power supply(5V);  
*Extension 
**Onboard reset key; 
**Three IIC interfaces;  
**Serial D2 and D3(Serial1); 
**Two analog sensor interface, connected to A3 and A6 respectively;  
**Three keys, connected to A0, A1 and A2;  
**1.27mm pitch base board; 
[[file:Microduino-Cube-S2-Pinout1Big1.jpg|800px|thumb|center|Microduino-Cube-S2]]
[[file:Microduino-Cube-S2-Pinout2Big1.jpg|800px|thumb|center|Microduino-Cube-S2-Pinout]]
[[file:Microduino-Cube-S2-Pinout3Big2.jpg|800px|thumb|center|Microduino-Cube-S2-Pinout]]
==Document==
Eagle PCB download:  
Main components:  
*3.3V voltage-stabilizing chip AMS1117： '''[[File:ASM1117.pdf]]'''

==Development==

It is designed especially for connection with [[Microduino-TFT]] , which can also be used together with other Microduino modules and sensors meeting Microduino interface standard.  
 [[file:Microduino-Cube-S2-Pinout4.jpg|800px|thumb|center|Microduino-Cube-S2]]

==Application==
===Test [[Microduino-TFT]]===
*Hardware needed: [[Microduino-USBTTL]], [[Microduino-Core]], [[Microduino-Cube-S2]] and [[Microduino-OLED]]；
*Software needed: Arduino IDE(Version 1.0 or higher) [[Microduino Getting started]]；
*Open IDE and select “Examples\_01_Microduino_TFT\examples\ST7735\graphicstest” in File. You need to change pin definition “#define cs   5” and “#define dc   4”; 
*Select board Microduino-Core (Atmega328P@16M,5V) and download directly after compiling;   
==Purchase==

==History==

==Image==
[[file:Microduino-Cube-S2-F.JPG|thumb|600px|center|Microduino-Cube-S2 Front]]
[[file:Microduino-Cube-S2-b.JPG|thumb|600px|center|Microduino-Cube-S2 Back]]
==Vedio==
|}