查看“Arduino IDE Driver Install”的源代码

{| style="width: 800px;"
|-
|

==Windows==

*Here are some problems frequently met by some friends. 
**The originally normal FT232R(USBTTL) suddenly just cannot be recognized by the computer; **Check the device management and you can only see an unknown device---" FT232R USB UART ";  
**So you turn to another computer, but the module can only be recognized as " FT232R USB UART " and another time of drive installation just doesn't work. 

If you have met the problems above, please refer to: '''[[The solution for FT232R (USBTTL) error "FT232R USB UART"]]'''

===Hardware Connection===
* Connect [[Microduino-USBTTL]] to the computer with a MicroUSB cable.


===Drive Installation ===
* It will appear new hardware recognized and then begin to search intra-system drive. If it doesn't find the drive, you need to install the drive manually. 


* Right click on the icon "Computer" and select "Management" and then open "Device manager", you can see the unrecognized hardware marked with "!". 

[[File:Microduino-Start2.jpg|thumb|center|600px|Microduino]]


* Right click on the unrecognized hardware and select driver software update. Choose browse for Computer to search driver software in the pop-up dialog.   

[[File:Microduino-Start3.jpg|thumb|center|600px|Microduino]]


* Choose the right subdirectory of drivers in the downloaded Arduino IDE directory .
 ** '''Note: If your computer still cannot find the drive, please further focus on " \drivers\FTDI USB Drivers".'''   [[File:Microduino-Start4.jpg|thumb|center|600px|Microduino]]


* Click for the next step and the installation is finished. 
** '''Note: If you fail to install the drive in win8, you need to start digital visa for installation. ''' [[File:Microduino-Start6.jpg|thumb|center|600px|Microduino]]


* After the installation, COM port will be displayed. 
[[File:Microduino-Start7.jpg|thumb|center|600px|Microduino]]

* Select the right module and serial port, you can enjoy endless possibilities brought about by Microduino. 

==Mac OS==

===Drive Installation ===
* Download USB drive program（http://www.ftdichip.com/Drivers/VCP.htm）
[[File:02 FTDI drivers mac.png|thumb|center|600px|USB driver for Mac]]


* Install USB drive. Although the software package is named 
'''FTDIUSBSerialDriver_10_4_10_5_10_6_10_7''', 
it can also be perfectly used in MAC OS X 10.9.3.
 [[File:Select Driver.png|thumb|center|600px|Select Driver]]

=== Hardware Connection=== 
* Connect [[Microduino-FT232R]] to your Mac with MicroUSB cable; 
* You will see dev/tty.usbserial-XXXXXXXX'''
[[File:03 Serial Port mac.png|thumb|center|600px|Serial Port]]


* Choose the right module and serial port and enjoy your fantastic experience with Microduino.  
|}