查看“Microduino-OLED”的源代码

{| style="width: 800px;"
|-
|
[[file:Microduino-OLED-rect.jpg|400px|thumb|right|Microduino-OLED]]

'''Microduino-Oled 12864''' is based on SSD1306 0.96 inch 12864 OLED display module. Using the I2C interface, 3.3V power supply. 


|-
|

==Features==

*Active light, no backlight, large-angle range;
*Low driving voltage, low power consumption;
*I2C communication, saving IO interface, widely used;
*Small, cheap, opened module;
*Open source hardware circuit design, compatible with the Arduino IDE development environment for programming;
*Defines unified interface Microduino specification and contain rich peripheral modules. Set up the quick connection with other Microduino modules and sensors easily and flexibly.
;


|-
|

==Specifications==

*Resolution：128x64；
*Interface： IIC communication；
*Power：3.3V；

[[File:OLED-Pinout-1.jpg|800px|thumb|center|Microduino-OLED-Pinout1]]

|-
|

==Documents==
Eagle PCB [[File:Microduino-Oled.zip]]
main components

*12864Oled Display screen：2864HSWEG01 [[File:2864HSWEG01.pdf]]
*Driver IC：SSD1306 [[File:SSD1306-Revision 1.1.pdf]]

|-
|

==Development==

*【U8glib Library [[Media:google download]] 】
*【Adafruit_SSD1306 Library [[Media:github download]] 】
*【MultiLCD Library https://github.com/stanleyhuangyc/MultiLCD github download ] 】

|-
|

==Applications==
The basic usage of u8glib library's sample program  

Note：core's IIC interface is A4（SDA），A5（SCL），core+'s IIC interface is D20（SDA），D21（SCL）

*put your downloaded library into library fold within the Arduino IDE's installation folder. If opened Arduino IDE, please close all other example program before you open example program within u8glib library;
*Open the HelloWorld sample program, remove comments for this line: U8GLIB_SSD1306_128X64 u8g (U8G_I2C_OPT_NONE) (remove "/ /"), then the compiler it,downloaded it directly. After download, you can see the  "Hello World!" displayed on the screen;
*Display character / variables:
**Use u8g.print (xx) function, just like use Serial.print (xx).
*Change the font：
**Use u8g.setFont (xx) function to change the font, parentheses "xx" can be replaced by the corresponding font library name (you can search font library in u8g.h within U8glib \ utility folder);
**Recommended large font: u8g_font_7x13, recommended middle font: u8g_font_fixed_v0r, recommended small fonts: u8g_font_chikitar;
*Change coordinates:
**Use u8g.setPrintPos (x, y) function, if you want to change the display coordinates
*Screen Rotation：
**Post u8g.setRot180() in void setup() function, the screen will flip 180 degrees, you also can change 180 to 90,270;

|-
|

==Buy==


|-
|
==History==

*June 23, 2013, Batch completed, formal shelves.
*June 2, 2013，Second proofing test is completed, No problems found so far, panel batch is complete.
*May 18, 2013，Test model came out, no power-on reset circuit, not a capacitor resolved.
*May 16, 2013，Model released, there is a small problem.
*May 7, 2013，Layout is complete.


|-
|

==Pictures==
:[[file:Microduino-OLED-T.jpg|thumb|600px|center|Microduino OLED Front]]
<br style="clear: left"/>
:[[file:Microduino-OLED-B.jpg|thumb|600px|center|Microduino OLED Back]]
<br style="clear: left"/>

|-
|
|}